The following article analyzes the effectiveness of directional hydraulic fracturing (DHF) as a method of rock burst prevention, used in black coal mining with a longwall system. In order to define changes in seismic activity due to DHF at the “Rydułtowy” Black Coal Mine (Upper Silesia, Poland), observations were made regarding the seismic activity of the rock mass during coal mining with a longwall system using roof layers collapse. The seismic activity was recorded in the area of the longwall itself, where, on a part of the runway, the rock mass was expanded before the face of the wall by interrupting the continuity of the rock layers using DHF. The following article presents measurements in the form of the number and the shock energy in the area of the observed longwall, which took place before and after the use of DHF. The second part of the article unveils the results of numerical modeling using the discrete element method, allowing to track the formation of goafs for the variant that does not take DHF into consideration, as well as with modeled fractures tracing DHF carried out in accordance with the technology used at “Rydułtowy” coal mine.
Rock mass is a medium created through processes that have lasted over four billion years, and its intrinsic feature is the variability of the parameters that describe it. A particularly high variability of mechanical parameters is observed in Carboniferous sedimentary and metamorphic rocks. The mechanical properties, especially the rock mass strength, are essential for the design and maintenance of the stability of excavations conducted in it and for the safe conduct of mining operations. This article presents the test results confirming the random variability of the mechanical parameters of the rock mass. The second part of the article presents the results of numerical simulations mapping the Carboniferous rock mass along with a 1000 m deep tunnel excavation protected by steel arch supports. Numerical simulations were carried out for models with different variability coefficients of strength and deformation parameters, and the obtained results were analyzed in terms of damage zones and rock mass stress state as well as axial forces in the modelled supports. The results of the simulation demonstrate the impact of the variability of rock mass properties on its state in the vicinity of the excavation and, consequently, on the internal forces in the steel supports and their uneven loading along the length of the excavation. This fact should be taken into account in their design.
This paper presents the results of investigating shallow rock mass layers with the use of electrical resistivity tomography. The aim of the study was to assess the condition of near-surface rock mass layers located above shallow mining workings of a historical mine in view of the possibility of the occurrence of loose zones or possible voids that could pose a sinkhole hazard for the surface. The study was carried out under the conditions of the “Sztygarka” Training Mine and Museum in Dąbrowa Górnicza City (Upper Silesian Coal Basin, Poland), where discontinuous surface deformations occurred in the past in the form of sinkholes. The study and its interpretation indicate the existence of a sinkhole hazard due to the ongoing processes of the transformation of the near-surface rock mass layers above the shallow workings of a historical mine.
This paper presents a hybrid methodology for predicting rock mass deformation and roadway loads induced by longwall mining. The approach combines the classical Budryk–Knothe influence function model with numerical simulations in the FLAC3D finite difference environment. Instead of explicitly reproducing large-scale excavation and caving, the impact of mining is introduced through analytically derived displacement boundary conditions applied to the numerical model. This allows detailed analyses of the rock mass deformation state while significantly reducing computational effort compared with conventional geomechanical models. The methodology involves deriving displacement components from the Budryk–Knothe influence function, implementing them through Python 3.6.1 scripts in FLAC3D 7.00, and performing stepwise simulations of longwall advance. Results show that the proposed approach reduces the number of finite difference zones by nearly an order of magnitude, achieving more than a tenfold decrease in computation time. At the same time, the displacement and stress distributions obtained remain consistent with both the analytical Budryk–Knothe solution and those from the classical numerical model. The study demonstrates that this methodology provides a reliable and efficient tool for assessing stress redistribution and deformation around roadway excavations influenced by mining. Its application enhances the accuracy of deformation predictions, supports support system design, and improves safety and efficiency in underground mining operations.
26 April 2019 in IOP Conference Series: Earth and Environmental Science
The article presents the results of numerical modeling of mining shaft lining while taking into account defects of its surface. The simulations were carried out for 64 variants, including various widths and depths of cavities in the lining. The results of the simulation are presented as distributions of the minimal principal stress and strength factor. The analysis of the obtained results allowed to indicate characteristic places in the cross-section of lining which were exposed to tensile stress. The article also analyzed the influence of the width and depth of the defects on the occurrence of tensile stress and the increase of strength factor in the lining.
18 July 2017 in BHM Berg- und Hüttenmännische Monatshefte