Would it be possible for an additively manufactured impeller of fused deposition modeling (FDM) technology to have a functional behavior and a similar performance to that of the original impeller of a close-coupled centrifugal pump? In this research paper, different tests are conducted to answer this question and to evaluate the manufacturing process of FDM functional parts. Three performance experiments with the same centrifugal pump, using an open test rig, are carried out and compared, first using the original impeller provided by the manufacturer of the pump, second using an FDM replication of the original one without post-treatment, and third using a chemically dimethyl ketone post-treated FDM replication. The results obtained in the tests demonstrate the functional behavior of both additive FDM impellers in comparison with the one fabricated by means of conventional technology (subtractive manufacturing). Additionally, analogous head-flow curves (and also with an improved performance to the one of the original impeller) are obtained. This research paper introduces significant information concerning a low-cost and low-time manufacturing process of additive functional parts. Moreover, new results are presented regarding the performance of chemically post-treated FDM parts working in functional applications. FDM impellers of high complexity and quality, which meet performance criteria, can be achieved.

This paper proposes an expansion of the Lean 5S methodology, which includes the concept of Safety–Security as 6S. Implementation was done by a standardized process tested in a pilot area that is part of the Integrated Industrial Manufacturing System Laboratory at the Higher Technical School of Engineering (ICAI). The additional 6S phase (Safety-Security) thoroughly reviews all areas of an industrial plant by analyzing the risks at each workstation, which let employees be fitted out with protection resources depending on each of their personal characteristics and to guarantee the safety of the workstation by strictly complying with occupational safety and health and machinery use standards, which must hold a CE certificate of compliance. The main objective was to increase the scope of 5S methodology to respond to the occupational safety and health needs for machines required in optimizing production processes. It is important to remember that companies must guarantee that their employees use personal protection equipment (PPE) at their work posts or stations that protect them properly from risks to their health and safety and that cannot be prevented or sufficiently limited by using collective means of protection or by adopting work organization measures. The industrial resources employed in the pilot area chosen for 6S implementation were a sheet metal deformation and cutting line comprised of a punch press, feeder, and winder, as well as a conventional machine tool with minimum safety specifications and without CE certification. Until now, there had been no plans to implement a 6S tool in this laboratory. However, given that the existing safety risk to operators is high, the implementation has led to obtaining optimal results, which justify the success of the 6S methodology proposal. In short, it lets us advance towards the zero accident target.

Fused Deposition Modeling (FDM) is the most used 3D printing technology. In this technology, 3D pieces are built warming and extruding thermoplastic through a nozzle. When the thermoplastic gets cold, internal stresses may generate deformations, mainly in corners. In this paper we describe a method for reduce these deformations (called warping), splitting pieces in hexagonal or squared bricks spatially locked. We have developed and tested an application that calculates the necessary GCODE to build the bricking piece directly, and we have measured a significant reduction in warp deformations