This paper presents a road distress detection system involving the phases needed to properly deal with fully automatic road distress assessment. A vehicle equipped with line scan cameras, laser illumination and acquisition HW-SW is used to storage the digital images that will be further processed to identify road cracks. Pre-processing is firstly carried out to both smooth the texture and enhance the linear features. Non-crack features detection is then applied to mask areas of the images with joints, sealed cracks and white painting, that usually generate false positive cracking. A seed-based approach is proposed to deal with road crack detection, combining Multiple Directional Non-Minimum Suppression (MDNMS) with a symmetry check. Seeds are linked by computing the paths with the lowest cost that meet the symmetry restrictions. The whole detection process involves the use of several parameters. A correct setting becomes essential to get optimal results without manual intervention. A fully automatic approach by means of a linear SVM-based classifier ensemble able to distinguish between up to 10 different types of pavement that appear in the Spanish roads is proposed. The optimal feature vector includes different texture-based features. The parameters are then tuned depending on the output provided by the classifier. Regarding non-crack features detection, results show that the introduction of such module reduces the impact of false positives due to non-crack features up to a factor of 2. In addition, the observed performance of the crack detection system is significantly boosted by adapting the parameters to the type of pavement.

This paper describes a comprehensive combination of feature extraction methods for vision-based pedestrian detection in Intelligent Transportation Systems. The basic components of pedestrians are first located in the image and then combined with a support-vector-machine-based classifier. This poses the problem of pedestrian detection in real cluttered road images. Candidate pedestrians are located using a subtractive clustering attention mechanism based on stereo vision. A components-based learning approach is proposed in order to better deal with pedestrian variability, illumination conditions, partial occlusions, and rotations. Extensive comparisons have been carried out using different feature extraction methods as a key to image understanding in real traffic conditions. A database containing thousands of pedestrian samples extracted from real traffic images has been created for learning purposes at either daytime or nighttime. The results achieved to date show interesting conclusions that suggest a combination of feature extraction methods as an essential clue for enhanced detection performance

This paper presents a new real-time hierarchical (topological/metric) simultaneous localization and mapping (SLAM) system. It can be applied to the robust localization of a vehicle in large-scale outdoor urban environments, improving the current vehicle navigation systems, most of which are only based on Global Positioning System (GPS). Then, it can be used on autonomous vehicle guidance with recurrent trajectories (bus journeys, theme park internal journeys, etc.). It is exclusively based on the information provided by both a low-cost, wide-angle stereo camera and a low-cost GPS. Our approach divides the whole map into local submaps identified by the so-called fingerprints (vehicle poses). In this submap level (low-level SLAM), a metric approach is carried out. There, a 3-D sequential mapping of visual natural landmarks and the vehicle location/orientation are obtained using a top-down Bayesian method to model the dynamic behavior. GPS measurements are integrated within this low-level improving vehicle positioning. A higher topological level (high-level SLAM) based on fingerprints and the multilevel relaxation (MLR) algorithm has been added to reduce the global error within the map, keeping real-time constraints. This level provides nearly consistent estimation, keeping a small degradation with GPS unavailability. Some experimental results for large-scale outdoor urban environments are presented, showing an almost constant processing time.

Although much research has taken place in WiFi indoor localization systems, their accuracy can still be improved. When designing this kind of system, fingerprint-based methods are a common choice. The problem with fingerprint-based methods comes with the need of site surveying the environment, which is effort consuming. In this work, we propose an approach, based on support vector regression, to estimate the received signal strength at non-site-surveyed positions of the environment. Experiments, performed in a real environment, show that the proposed method could be used to improve the resolution of fingerprint-based indoor WiFi localization systems without increasing the site survey effort.

Summary: Working with mobile robots, prior to execute the local planning stage, they must know the environment where they are moving. For that reason the perception and mapping stages must be performed previously. This paper presents a survey in the state of the art in detection and tracking of moving obstacles (DATMO). The aim of what follows is to provide an overview of the most remarkable methods at each field specially in indoor environments where dynamic obstacles can be potentially more dangerous and unpredictable. We are going to show related DATMO methods organized in three approaches: model-free, model-based and grid-based. In addition, a comparison between them and conclusions will be presented.

This paper describes a new approach for estimating the vehicle motion trajectory in complex urban environments by means of visual odometry. A new strategy for robust feature extraction and data post-processing is developed and tested on-road. Images from scale-invariant feature transform (SIFT) features are used in order to cope with the complexity of urban environments. The obtained results are discussed and compared to previous works. In the prototype system, the ego-motion of the vehicle is computed using a stereo-vision system mounted next to the rear view mirror of the car. Feature points are matched between pairs of frames and linked into 3D trajectories. The distance between estimations is dynamically adapted based on re-projection and estimation errors. Vehicle motion is estimated using the non-linear, photogrametric approach based on RAndom SAmple Consensus (RANSAC). The final goal is to provide on-board driver assistance in navigation tasks, or to provide a means of autonomously navigating a vehicle. The method has been tested in real traffic conditions without using prior knowledge about the scene or the vehicle motion. An example of how to estimate a vehicle's trajectory is provided along with suggestions for possible further improvement of the proposed odometry algorithm.