This comprehensive review paper delves into the utilization of Glass Fiber-Reinforced Polymer (GFRP) composites within the realm of concrete column reinforcement, spotlighting the surge in structural engineering applications that leverage GFRP instead of traditional steel to circumvent the latter’s corrosion issues. Despite a significant corpus of research on GFRP-reinforced structural members, questions about their compression behavior persist, making it a focal area of this review. This study evaluates the properties of GFRP bars and their impact on the structural behavior of concrete columns, addressing variables such as concrete type and strength, cross-sectional geometry, slenderness ratio, and reinforcement specifics under varied loading protocols. With a dataset spanning over 250 publications from 1988 to 2024, our findings reveal a marked increase in research interest, particularly in regions like China, Canada, and the United States, highlighting GFRP’s potential as a cost-effective and durable alternative to steel. However, gaps in current knowledge, especially concerning Ultra-High-Performance Concrete (UHPC) reinforced with GFRP, underscore the necessity for targeted research. Additionally, the contribution of GFRP rebars to compressive column capacity ranges from 5% to 40%, but current design codes and standards underestimate this, necessitating new models and design provisions that accurately reflect GFRP’s compressive behavior. Moreover, this review identifies other critical areas for future exploration, including the influence of cross-sectional geometry on structural behavior, the application of GFRP in seismic resistance, and the evaluation of the size effect on column strength. Furthermore, the paper calls for advanced studies on the long-term durability of GFRP-reinforced structures under various environmental conditions, environmental and economic impacts of GFRP usage, and the potential of Artificial Intelligence (AI) and Machine Learning (ML) in predicting the performance of GFRP-reinforced columns. Addressing these research gaps is crucial for developing more resilient and sustainable concrete structures, particularly in seismic zones and harsh environmental conditions, and fostering advancements in structural engineering through the adoption of innovative, efficient construction practices.

The iron-based shape memory alloy (Fe-SMA) has promising applications in strengthening and repairing aged steel-reinforced concrete structural elements. Fe-SMA bars can produce pre-stressing forces on reinforced concrete members by activating their shape memory phenomenon upon heating. This study aims to numerically evaluate the impact of pre-stressed Fe-SMA bars on the structural behavior of reinforced concrete (RC) beams at the serviceability and ultimate stages. Nonlinear finite element (FE) models were developed to predict the response of RC beams externally strengthened with Fe-SMAs. The model shows to correlate well with published experimental results. A parametric investigation was also carried out to examine the effect of various concrete grades, pre-stressing levels, and Fe-SMA bars’ diameter on load-deflection behavior. In light of the innovative nature of the Fe-SMA strengthening technique, a comparison investigation was established between RC beams strengthened with Fe-SMA bars against different pre-stressing systems, such as carbon fiber reinforced polymer (CFRP) bars, glass fiber reinforced polymer (GFRP) bars, and steel strands. The numerical findings showed a significant increase in the beams’ load-carrying capacity with larger Fe-SMA bars’ diameter. Specifically, using 12 mm Fe-SMA bars instead of 6 mm increased the beam’s strength by 73%. However, a 14% reduction in ductility was recorded for that case. Moreover, the pre-stressing level of Fe-SMA bars and concrete grade showed a negligible effect on the ultimate strength of the examined beams. Moreover, increasing the pre-stressing level and concrete strength significantly enhanced the load-deflection response in the serviceability stage. Furthermore, using 2T22 mm of Fe-SMA bars resulted in a better structural performance of RC beams compared to other techniques with 2T12 mm, with a comparable cost. Thus, it can be concluded that using Fe-SMA bars embedded in a shotcrete layer attached to the beam’s soffit is a viable and promising strengthening strategy. Nevertheless, further experimental investigations are recommended to further ascertain the reported findings of this numerical investigation.

The superior mechanical characteristics of ultra-high-performance concrete (UHPC) have attracted the interest of many researchers worldwide. Researchers have attempted to perform comparative analyses on the behavior of UHPC versus conventional and high-strength concrete, with their aim being to gain more insights into the difference between different types of concrete. However, the current state-of-the-art revealed no direct comprehensive comparisons between their behaviors in ductile coupled shear walls under seismic loading. This paper explores a comprehensive side-by-side comparison in terms of seismic behavior and cost analysis for four 60-story archetype buildings. The reference building was designed using high-strength concrete with a strength of 60 MPa. The other three archetype variations incorporated three different UHPC grades: 150 MPa, 185 MPa, and 220 MPa. The plan configuration and the lateral force-resisting system (LFRS) were chosen according to the most common practice in the UAE. The main objective is to report the effect of UHPC on the LFRS (ductile coupled shear walls). Moreover, a simplified initial cost analysis (materials and labor) design was performed. The findings of this paper indicate that the use of UHPC is capable of improving the seismic performance behavior of the lateral system as well as reducing the total initial costs.

In this paper, an investigation of linear eigenvalue buckling of functionally graded material (FGM) plates under uniaxial loading is carried out. The computer model is analyzed using the finite element (FE) package ABAQUS. An analysis is carried out to study the effect of the size and geometry of openings in the FGM plate on the critical buckling load. The circular, square, and diamond openings vary in size based on the ratio of the opening diameter to the width of the FGM plate. Moreover, the effect of the aspect ratio (width to thickness) of the FGM plate on the critical buckling load is examined. Further, the effect of the power law index on buckling behavior is investigated. The results show that the increase in the size of the opening and the aspect ratio reduces the critical buckling load of the FGM plate. Moreover, the lower the power law index, the higher the critical buckling load. The diamond shape opening shows the best performance in terms of the critical buckling load, and the effect of the plate thickness has a more significant influence on the critical buckling load of the FGM plate compared to the size of the opening.

Openings in the shear span can significantly affect the structural behavior of reinforced concrete (RC) beams, particularly in terms of shear capacity and crack propagation. This paper aims to investigate the feasibility of strengthening the web opening in the shear zone of RC beams by using iron-based shape memory alloy (Fe-SMA) bars, providing valuable insights for structural engineers and researchers. Numerical analysis with ABAQUS/CAE 2020 software was employed in the current study. The research was divided into six groups of beams with web openings of different lengths (150, 300, and 450 mm), prestressing levels (0%, 30%, and 60%), and reinforcement diameters (14, 18, and 22 mm) of Fe-SMA bars. The results show that the presence of web openings can cause a significant reduction in the cracking and ultimate loads of the beams, with reductions ranging from 11% to 50% and 36% to 48%, respectively. However, by adding pre-stressed Fe-SMA bars around small web openings (100 × 150 mm), the shear capacity of the beam is restored, and the beam exhibits behavior similar to solid beams. Additionally, activating the Fe-SMA bars by 30% and 60% resulted in almost similar cracking loads but improved load-carrying capacity of the beam with small openings by 12% and 9%, respectively, compared to the solid beam. The technique proposed for enhancing shear strength is most effective for beams with small (100 × 150 mm) and medium (100 × 300 mm) web openings as it can restore both the beam’s shear strength and stiffness. However, for beams with larger web openings (100 × 450 mm), the use of activated Fe-SMA beams can recover almost 90% of the solid beam’s shear capacity. Furthermore, reinforcing small openings with Fe-SMA bars of different diameters enhances beam shear capacity and stiffness, while for larger openings, higher Fe-SMA reinforcement ratios could potentially restore the beam’s full strength and stiffness. This study emphasizes the importance of strengthening web openings in RC beams, particularly in shear zones, and provides significant insights into how to strengthen beams with web openings, thereby contributing to developing safer structures. However, further laboratory experiments are recommended to validate, complement and extend the findings of this numerical study.

In this paper, several analyses were conducted to investigate the buckling behavior of Functionally Graded Material (FGM) thin plates with various circular cutout arrangements. The computer model was simulated using the Finite Element (FE) software ABAQUS. The developed model was validated by the authors in previous research. A parametric analysis was employed to investigate the effect of plate thickness and circular cutout diameter on the buckling behavior of the FGM thin plates. The normalized buckling load was also calculated to compare the buckling performance of FGM plates with various dimensions. Moreover, von Mises stress analysis was examined to understand the yield capability of the FGM plates in addition to the buckling modes that show the stress distribution of the critical buckling stress. Hence, this research provides a comprehensive analysis to display the relation between the critical buckling load and the arrangement of the circular cutouts. The results show that the critical buckling load heavily depends on the dimension of the plate and the cutout size. For instance, an increase in the plate thickness and a decrease in the cutout diameter increase the critical buckling load. Moreover, the circular cutout in a horizontal arrangement exhibited the best buckling performance, and as the arrangement shifts to a vertical arrangement, the buckling performance deteriorates.