Mohammad S. Sharawi

Prof. Mohammad S. Sharawi

Polytechnique Montreal
orcid

Research Focus & Metrics

Academic Career Length

25Years (2002-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 October 2013 in IEEE Antennas and Propagation Magazine
Verified
Journal Article
Closed access
Mohammad S. SharawiMohammad S. Sharawi
Mohammad S. Sharawi
Multiple-input-multiple-output (MIMO) antenna systems are a key enabling technology for modern fourth-generation (4G) wireless systems. The need for higher data rates for multimedia applications within the limited bandwidth and power levels led the way to the use of multiple antennas at the receiver and transmitter ends. Printed MIMO antenna systems, supporting multiple bands, including the lower band of the 4G wireless standard (LTE), pose a challenge in terms of available size. In this work, we start by defining the new required metrics to characterize MIMO antenna systems. We then present several recent printed multi-band MIMO antenna systems, along with some isolation-enhancement mechanisms that are used in these closely packed antennas.

4 April 2017 in IEEE Antennas and Propagation Magazine
Verified
Journal Article
Closed access
Mohammad S. SharawiMohammad S. Sharawi
Mohammad S. Sharawi
In the past six years or so, the number of scientific articles and conference papers providing possible multiple-input, multiple-output (MIMO) antenna system solutions has noticeably increased. Flagship conferences on antennas and propagation have recently had multiple sessions addressing MIMO antenna systems and their applications. The importance of such antenna systems lies in the magnitude of their application in current wireless devices and gadgets, and this thrust will continue because fourth-generation (4G) and the upcoming fifth-generation (5G) wireless standards rely heavily on MIMO technology. But throughout the years, and up until now, a wide range of publications still suffer from some major misconceptions and unclear understanding of the fundamental aspects while designing, characterizing, and evaluating such multiantenna systems.

1 October 2013 in IEEE Antennas and Propagation Magazine
Verified
Journal Article
Closed access
ANAhmad B. Numan
Ahmad B. Numan
Mohammad S. SharawiMohammad S. Sharawi
Mohammad S. Sharawi
In this paper, a step-by-step procedure is devised for extracting the material parameters to facilitate and simplify the design procedure of metamaterial structures using commercial software packages. A parameter-retrieval method using the S parameters is used to calculate the curves for the complex permittivity and permeability of the metamaterial based on its unit element. The S parameters are extracted using HFSS TM , which is a Finite-Element-Method (FEM)-based full-wave simulator. The permittivity and permeability curves are calculated using a MATLAB script. Two different methods are used in HFSS to extract the S parameters: one using perfect electric and perfect magnetic (PE-PM) boundary conditions, and the second using the master-slave boundary conditions. Wave ports and Floquet ports are used to excite the structure. The results of the proposed procedure are validated by comparing the calculated curves with already published results.

1 June 2015 in IET Microwaves, Antennas & Propagation
Verified
Journal Article
Closed access
MKMuhammad Umar khan
Muhammad Umar khan
Mohammad S. SharawiMohammad S. Sharawi
Mohammad S. Sharawi
RMRaj Mittra
Raj Mittra
The microstrip patch antenna (MPA) has been in use and has been studied extensively during the past three decades. This antenna, which consists of a metallic patch printed on a dielectric substrate over a ground plane, offers several advantages including ease of design and fabrication; low profile and planar structure; and ease of integration with circuit elements. The minimum dimension of a conventional MPA is in the order of half a wavelength. In recent years, with the advent of new standards and compact wireless devices, there has been a need to reduce the size of this type of antenna. This study discusses some of the principal techniques that have been reported in the literature to reduce the size of an MPA. These miniaturisation techniques include material loading, reshaping the antenna, shorting and folding, introducing slots and defects in the ground plane and the use of metamaterials. The major features and drawbacks of each of these approaches are highlighted in this study along with their effects on the antenna performance metrics.

1 January 2017 in IET Microwaves, Antennas & Propagation
Verified
Journal Article
Open access
PDF file
RHRifaqat Hussain
Rifaqat Hussain
AAAli T. Alreshaid
Ali T. Alreshaid
SPSymon K. Podilchak
Symon K. Podilchak
Mohammad S. SharawiMohammad S. Sharawi
Mohammad S. Sharawi
A novel integrated antenna solution for wireless handheld devices is proposed for the existing 4G standards and upcoming 5G systems for broadband, high data rate communications. The complete antenna system is a unique combination of a multiple‐input–multiple‐output (MIMO) antenna system at microwave frequencies and a millimetre (mm)‐wave antenna array. The MIMO antenna system consists of two reactive loaded monopoles while the mm‐wave array consists of a planar 2 by four slot antennas. The integrated antenna system covers the frequency bands from 1870 to 2530 MHz for 4G standards along with the upcoming 5G mm‐wave band at 28 GHz. In addition, the integrated antenna system is planar and is designed for typical smart phone devices with a standard 60 mm by 100 mm by 0.965 mm back plane. Excellent field correlation values were obtained across the 4G band while realised peak gain values of 4 and 8 dBi were, respectively, measured for the MIMO and mm‐wave antenna arrays. The proposed antenna design may also be useful for other compact implementations that support 4G and 5G communications.

15 May 2013 in IEEE Transactions on Antennas and Propagation
Verified
Journal Article
Closed access
Mohammad S. SharawiMohammad S. Sharawi
Mohammad S. Sharawi
MKMuhammad Umar khan
Muhammad Umar khan
ANAhmad B. Numan
Ahmad B. Numan
DADaniel N. Aloi
Daniel N. Aloi
A 2 × 2 (four-element) multiple-input multiple-output (MIMO) patch antenna system is designed and fabricated for a 2.45-GHz ISM band operation. It uses complementary split-ring resonator (CSRR) loading on its ground plane for antenna miniaturization. This reduces the single-element antenna size by 76%. The total board size of the proposed MIMO antenna system, including the GND plane is 100 × 50 × 0.8 mm3, while the single-patch antenna element has a size of 14 × 18 mm2. The antenna is fabricated and tested. Measured results are in good agreement with simulations. A minimum measured isolation of 10 dB is obtained given the close interelement spacing of 0.17λ. The maximum measured gain for a single operating element is -0.8 dBi.