The use of plastics for packaging has some advantages, since they are flexible and inexpensive. However, most plastics are of single use, which, combined with low recycling or reuse ratios, contributes substantially to environmental pollution. This work is part of a project studying the habits of Portuguese citizens concerning plastic food packaging and focuses on aspects related to sustainability. The survey was carried out via an online questionnaire about sustainability, recycling, and knowledge of the effects of plastic materials or their residues on the environment. The results were obtained based on a statistical analysis of the data. The participants tend to think about the negative impact of plastic packages on the environment; 39% sometimes do not buy plastic; and 30% try to look for alternatives. A substantial fraction, 81%, support the avoidance of plastic utensils and reduction in the use of plastic bags. Most participants have a good knowledge of recycling and strongly agree with the use of recycled materials, and 87% of respondents practice separation of different types of waste for recycling. Changing plastic consumption habits has not been an easy task. Nevertheless, it is expected that society will increasingly move toward sustainable habits, questioning its actions and considering their impact on the environment.

The rapid expansion of industrial and agricultural activities in recent years has significantly contributed to water pollution leading to a decline in water quality and the need for effective treatment and reuse strategies. Metal contamination in water bodies poses severe environmental and health risks, making the development of cost-effective and sustainable remediation methods essential. Among the various treatment approaches, biosorption using biological adsorbents has emerged as a promising alternative due to its low cost and high efficiency. However, while the adsorption mechanisms of single metals are well understood, the competitive interactions between multiple metal ions during the sorption process remain less explored. In this review, we analyze the competitive biosorption of metals in multi-metallic wastewater systems. Key factors influencing metal removal, such as pH, contact time, biosorbent dosage, and initial metal concentration, are discussed, along with the intrinsic properties of biosorbents and metal ions that affect sorption efficiency. Additionally, we highlight recent studies on agroforestry byproducts as effective biosorbents for metal removal, showcasing their potential for sustainable water treatment. Heavy metals pose significant risks even at low concentrations, necessitating robust regulations and advanced treatment technologies; biomass byproducts, as cost-effective biosorbents, can be optimized through pre-treatment, activation, pH and temperature control, and particle size reduction, while effectively managing competitive multi-metal adsorption remains crucial for industrial effluent treatment.

Four lignocellulosic materials (walnut shell, chestnut shell, pine wood and burnt pine wood) were analyzed as biosorbents to remove nickel ions in aqueous solution. The optimal pH condition was determined. Due to this, a range of different pHs (3.0 to 7.5) was tested. The adsorption isotherms and kinetics were established. To plot Langmuir and Freundlich isotherms, batch adsorption tests were made with variable nickel concentrations (5 to 200 mg L⁻¹). The pseudo-first order, pseudo-second order, Elovich and intraparticle diffusion models were used to describe the kinetics, batch adsorption tests were carried out with 25 mg L⁻¹ of nickel solution and agitation time varied from 10 to 1440 min. The specific surface area of the different materials was between 3.97 and 4.85 m²g⁻¹ with the exception for wood with 1.74 m²g⁻¹. The pore size was 26.54 nm for wood and varied between 5.40 and 7.33 nm for the remaining materials. The diffractograms analysis showed that all the lignocellulosic materials presented some crystalline domains with the exception of burnt pine wood which was completely amorphous. The best pH was found to be around 5.0. At this pH the adsorption was higher for chestnut shells, walnut shells, burnt pine wood and wood, respectively. All samples fitted the Langmuir model well, with R² of 0.994 to 0.998. The sorption kinetics was well described by the pseudo-second order equation with R² between 0.996 and 1.00. No significative differences on the surface of the materials before and after adsorption could be observed by SEM. Finally, all materials tested were able to remove nickel ions in aqueous solution.

The increasing emphasis on environmental sustainability has placed biomass as a versatile and renewable resource, while the management and disposal of forest byproducts remain a significant challenge. This study explores the valorization of forest biomass residues derived from Pinus pinaster, Pinus pinea, and the invasive species Acacia dealbata, with a focus on their potential application as bioadsorbents. A comprehensive physicochemical characterization was conducted for different biomass fractions (leaves, needles, and branches of varying diameters). Leaves and needles contained higher amounts of extractives (from 7.7% in acacia leaves to 18.8% in maritime pine needles) and ash (3.4 and 4.2% in acacia leaves and stone pine needles, respectively), whereas branches contained more holocellulose (from 59.6% in P. pinea small branches to 79.2% in P. pinaster large branches). ATR-FTIR and pHpzc analyses indicated compositional and surface charge differences, with higher pHpzc values in A. dealbata relative to Pinus. TG analysis showed that acacia large branches degraded at a lower temperature (320 °C) compared to Pinus species (440–450 °C). Overall, the findings highlight the suitability of these underutilized forest byproducts as bioadsorbents, contributing to the advancement of circular economy practices.

Empty pinecones are a largely available byproduct of Pinus pinea L. nut production, mostly concentrated in the Mediterranean area; e.g., in Portugal, around 70,000 tons of pinecones are produced annually. One valorization line for residual biomass is its use as biosorbents for the removal of contaminants in effluents and water courses which are an increasing environmental problem. This study explores the biosorbent potential of pinecones to remove zinc ions from aqueous solutions. We analyzed the morphology and chemical composition of pinecones (9.4% extractives, 37.0% lignin, 68.6% holocellulose, 1.4% ash). The effect of pH and adsorbent dose on the adsorption process was studied, as were the sorption kinetics and isotherms. The pinecones showed good potential to remove Zn ions, with 96% removal at pH 7 and a maximum adsorption capacity of 7.92 mg g⁻¹. The process followed the Freundlich isotherm model, indicating a heterogeneous surface and multilayer adsorption, and the pseudo-second-order kinetic model, suggesting chemisorption as the dominant mechanism. The use of pinecones as bio-adsorbent is therefore a green and low-cost alternative for environmental remediation and biomass waste management.

Water pollution by toxic metals, especially by lead ions, is a serious environmental concern due to these metals’ persistence, bioaccumulation, and toxicity. Aiming to reduce metal concentrations to non-toxic levels, this study analyzed the removal of lead from water through adsorption with bio-adsorbents. The adsorbent potential of the following four lignocellulosic byproducts were tested: walnut and chestnut shells, pine wood, and burnt pine wood. Removal rates of 97–99% were achieved at optimized conditions, i.e., at a pH of approximately 7, adsorbent dose of 4 g L⁻¹, and 12 h of reaction. The BET specific surface area was between 1.74 and 4.85 m² g⁻¹. The pore size of the wood bio-adsorbent was 26.54 nm, and those of the remaining materials were between 5.40 and 7.33 nm. With R² = 0.998–1.000, the kinetics fit the pseudo-second-order model better, suggesting that chemisorption is the dominant mechanism. Both Langmuir and Freundlich isothermal models fit the data well, with R² = 0.946–0.999. It can be concluded that all the bio-adsorbents tested have the potential to efficiently remove lead ions from water.