Gaia is a cornerstone mission in the science programme of the EuropeanSpace Agency (ESA). The spacecraft construction was approved in 2006, following a study in which the original interferometric concept was changed to a direct-imaging approach. Both the spacecraft and the payload were built by European industry. The involvement of the scientific community focusses on data processing for which the international Gaia Data Processing and Analysis Consortium (DPAC) was selected in 2007. Gaia was launched on 19 December 2013 and arrived at its operating point, the second Lagrange point of the Sun-Earth-Moon system, a few weeks later. The commissioning of the spacecraft and payload was completed on 19 July 2014. The nominal five-year mission started with four weeks of special, ecliptic-pole scanning and subsequently transferred into full-sky scanning mode. We recall the scientific goals of Gaia and give a description of the as-built spacecraft that is currently (mid-2016) being operated to achieve these goals. We pay special attention to the payload module, the performance of which is closely related to the scientific performance of the mission. We provide a summary of the commissioning activities and findings, followed by a description of the routine operational mode. We summarise scientific performance estimates on the basis of in-orbit operations. Several intermediate Gaia data releases are planned and the data can be retrieved from the Gaia Archive, which is available through the Gaia home page.

Context. At about 1000 days after the launch of Gaia we present the first Gaia data release, Gaia DR1, consisting of astrometry and photometry for over 1 billion sources brighter than magnitude 20.7.Aims. A summary of Gaia DR1 is presented along with illustrations of the scientific quality of the data, followed by a discussion of the limitations due to the preliminary nature of this release.Methods. The raw data collected by Gaia during the first 14 months of the mission have been processed by the Gaia Data Processing and Analysis Consortium (DPAC) and turned into an astrometric and photometric catalogue.Results. Gaia DR1 consists of three components: a primary astrometric data set which contains the positions, parallaxes, and mean proper motions for about 2 million of the brightest stars in common with the Hipparcos and Tycho-2 catalogues – a realisation of the Tycho-Gaia Astrometric Solution (TGAS) – and a secondary astrometric data set containing the positions for an additional 1.1 billion sources. The second component is the photometric data set, consisting of mean G-band magnitudes for all sources. The G-band light curves and the characteristics of ~3000 Cepheid and RR Lyrae stars, observed at high cadence around the south ecliptic pole, form the third component. For the primary astrometric data set the typical uncertainty is about 0.3 mas for the positions and parallaxes, and about 1 mas yr-1 for the proper motions. A systematic component of ~0.3 mas should be added to the parallax uncertainties. For the subset of ~94 000 Hipparcos stars in the primary data set, the proper motions are much more precise at about 0.06 mas yr-1. For the secondary astrometric data set, the typical uncertainty of the positions is ~10 mas. The median uncertainties on the mean G-band magnitudes range from the mmag level to ~0.03 mag over the magnitude range 5 to 20.7.Conclusions. Gaia DR1 is an important milestone ahead of the next Gaia data release, which will feature five-parameter astrometry for all sources. Extensive validation shows that Gaia DR1 represents a major advance in the mapping of the heavens and the availability of basic stellar data that underpin observational astrophysics. Nevertheless, the very preliminary nature of this first Gaia data release does lead to a number of important limitations to the data quality which should be carefully considered before drawing conclusions from the data.

The Spectral and Photometric Imaging REceiver (SPIRE), is the Herschel Space Observatory`s submillimetre camera and spectrometer. It contains a three-band imaging photometer operating at 250, 350 and 500 μm, and an imaging Fourier-transform spectrometer (FTS) which covers simultaneously its whole operating range of 194–671 μm (447–1550 GHz). The SPIRE detectors are arrays of feedhorn-coupled bolometers cooled to 0.3 K. The photometer has a field of view of 4´× 8´, observed simultaneously in the three spectral bands. Its main operating mode is scan-mapping, whereby the field of view is scanned across the sky to achieve full spatial sampling and to cover large areas if desired. The spectrometer has an approximately circular field of view with a diameter of 2.6´. The spectral resolution can be adjusted between 1.2 and 25 GHz by changing the stroke length of the FTS scan mirror. Its main operating mode involves a fixed telescope pointing with multiple scans of the FTS mirror to acquire spectral data. For extended source measurements, multiple position offsets are implemented by means of an internal beam steering mirror to achieve the desired spatial sampling and by rastering of the telescope pointing to map areas larger than the field of view. The SPIRE instrument consists of a cold focal plane unit located inside the Herschel cryostat and warm electronics units, located on the spacecraft Service Module, for instrument control and data handling. Science data are transmitted to Earth with no on-board data compression, and processed by automatic pipelines to produce calibrated science products. The in-flight performance of the instrument matches or exceeds predictions based on pre-launch testing and modelling: the photometer sensitivity is comparable to or slightly better than estimated pre-launch, and the spectrometer sensitivity is also better by a factor of 1.5–2.

We present the COSMOS2015²⁴ catalog, which contains precise photometric redshifts and stellar masses for more than half a million objects over the 2deg² COSMOS field. Including new images from the UltraVISTA-DR2 survey, Y-band images from Subaru/Hyper-Suprime-Cam, and infrared data from the Spitzer Large Area Survey with the Hyper-Suprime-Cam Spitzer legacy program, this near-infrared-selected catalog is highly optimized for the study of galaxy evolution and environments in the early universe. To maximize catalog completeness for bluer objects and at higher redshifts, objects have been detected on a χ ² sum of the and z ⁺⁺ images. The catalog contains objects in the 1.5 deg² UltraVISTA-DR2 region and objects are detected in the “ultra-deep stripes” (0.62 deg²) at (3σ, 3″, AB magnitude). Through a comparison with the zCOSMOS-bright spectroscopic redshifts, we measure a photometric redshift precision of = 0.007 and a catastrophic failure fraction of %. At , using the unique database of spectroscopic redshifts in COSMOS, we find = 0.021 and . The deepest regions reach a 90% completeness limit of to z = 4. Detailed comparisons of the color distributions, number counts, and clustering show excellent agreement with the literature in the same mass ranges. COSMOS2015 represents a unique, publicly available, valuable resource with which to investigate the evolution of galaxies within their environment back to the earliest stages of the history of the universe. The COSMOS2015 catalog is distributed via anonymous ftp and through the usual astronomical archive systems (CDS, ESO Phase 3, IRSA).

Context. The background radiation in the optical and the infrared cause energy loss in the propagation of high energy particles through space. In particular, TeV observations with Cherenkov telescopes of extragalactic sources are influenced by the opacity effects due to the interaction of the very high-energy source photons with the background light. Aims. With the aim of assessing with the best possible detail these opacity terms, we have modelled the extragalactic optical and infrared backgounds using available information on cosmic sources in the universe from far-UV to sub-millimeter wavelengths over a wide range of cosmic epochs. Methods. We have exploited the relevant cosmological survey data – including number counts, redshift distributions, luminosity functions – from ground-based observatories in the optical, near-IR, and sub-millimeter, as well as multi-wavelength information coming from the HST, ISO and Spitzer space telescopes. Additional constraints have been used from direct measurements or upper limits on the extragalactic backgrounds by dedicated missions (COBE). All data were fitted and interpolated with a multi-wavelength backward evolutionary model, allowing us to estimate the background photon density and its redshift evolution. From the redshift-dependent background spectrum, the photon-photon opacities for sources of high-energy emission at any redshifts were then computed. The same results can also be used to compute the optical depths for any kind of processes in the intergalactic space involving interactions with background photons (like scattering of cosmic-ray particles).Results. We have applied our photon-photon opacity estimates to the analysis of spectral data at TeV energies on a few BLAZARs of particular interest. The opacity-corrected TeV spectra are entirely consistent with standard photon-generation processes and show photon indices steeper than . Contrary to some previous claims, but in agreement with other reports, we find no evidence for any truly diffuse background components in addition to those from resolved sources. We have tested in particular the effects of a photon background originating at very high redshifts, as would be the emissions by a primeval population of Population III stars around . We could not identify any opacity features in our studied BLAZAR spectra consistent with such an emission and place a stringent limit on such a diffuse photon intensity of ~6 nW/m2/sr between 1 and 4 μm. Conclusions. TeV observations of BLAZARs are consistent with background radiation contributed by resolved galaxies in the optical and IR, and exclude prominent additional components from very high-z unresolved sources.