In this paper, the impact of the Defected Ground Structure (DGS) in PIFA antennas for IoT terminals is evaluated. Numerical analysis of antenna performance using finite element methods in term of gain and matching are discussed for Fishnet based PIFA antenna. The proposed PIFA antenna configuration is based on Fishnet Metamaterials etched in the ground layer using Defected Ground Structure (DGS) technique. The simulation results of the proposed Fishnet based PIFA antenna show dual band frequency at 3.9 GHz and 5 GHz with an enhancement in return loss, a slightly higher total efficiency of 92.50%, a gain and directivity enhancement of 3.11dB compare to the classical PIFA antenna gain.
We have systematically studied the structural, electronic, and optical properties of two types of guest-free Si46 silicon clathrates using first-principles density-functional theory calculations. The properties are compared between two different crystal structures with the same chemical formula of Si46, type-I, and type-VIII. We apply a hybrid functional approach with the Becke, Lee-Yang-Parr (BLYP) functional and compare the electronic properties with those by generalized gradient approximation (GGA-PBE). The band structures of both clathrates calculated within the GGA indicate semiconducting (insulating) properties with indirect bandgaps of 1.38 and 1.36 eV for type-I and type-VIII, respectively. These band gaps increase to 1.60 and 1.62 eV by using the BLYP hybrid functional. The calculated optical absorption of type-I clathrate is slightly larger than that of type-VIII. Lastly, we also performed a symmetry analysis of optical transitions for both Si46 clathrates. It is found that optical transitions are dipole-allowed at the band-edge located along the Γ–Η line for Si46-VIII, while the transitions for type-I Si46 are forbidden by symmetry. It is hoped that this finding will motivate further investigations of optical capabilities of the silicon based type-VIII clathrates for photovoltaic and photonic devices.
24 May 2025 in Materials for Renewable and Sustainable Energy
The transition to sustainable energy has driven extensive research into perovskite solar cells (PSCs) as promising candidates for next-generation photovoltaics. Despite their remarkable efficiencies, the commercialization of PSCs remains hindered by lead toxicity and material instability. In this study, we investigate a lead-free samarium-based double perovskite oxide, Sm2NiMnO6 (SNMO), as the active absorber layer in an innovative inverted, hole transport layer (HTL)-free PSC architecture. Using SCAPS-1D simulations, we optimized the device configuration and achieved a power conversion efficiency (PCE) of 10.93%, with an open-circuit voltage (VOC) of 0.8 V, a short-circuit current density (JSC) of 16.46 mA cm−2, and a fill factor (FF) of 82.14%. Notably, increasing the SNMO absorber thickness enhanced light absorption in the red spectral region, shifting the external quantum efficiency (EQE) peak from 380 nm wavelength at a thickness of 50 nm to approximately 620 nm at 1 µm. Furthermore, we investigated various electron transport layers (ETLs) and found that the indium tin oxide (ITO) exhibited superior PV performances, boosting the PCE to ~ 12.6% due to its excellent conductivity and optimal energy band alignment with SNMO. These findings establish SNMO as a promising absorber material for environmentally friendly PSCs, paving the way for cheaper, simpler, scalable, and sustainable photovoltaic solutions. This work highlights the potential of HTL-free architectures to reduce costs and complexities while maintaining competitive efficiencies, marking a significant step forward in the development of lead-free solar technologies.