Nicola Secciani

Dr. Nicola Secciani

Department of Industrial Engineering, University of Florence, Florence, Tuscany, Italy
orcid
Assistant Professor (University of Florence, Dept. of Indust...

Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
19 July 2022 in IEEE Journal of Oceanic Engineering
Verified
Journal Article
Open access
ABAlessandro Bucci
Alessandro Bucci
MFMatteo Franchi
Matteo Franchi
Alessandro RidolfiAlessandro Ridolfi
Alessandro Ridolfi
Nicola SeccianiNicola Secciani
Nicola Secciani
Benedetto AllottaBenedetto Allotta
Benedetto Allotta
In the underwater domain, guaranteeing accurate navigation for an autonomous underwater vehicle (AUV) is a complex but fundamental task to be achieved. As a matter of fact, only by ensuring a correct AUV localization, it is possible to accomplish surveillance, monitoring, and inspection missions. Most of the navigation filters for AUVs are based on Bayesian estimators, such as the Kalman filter, the extended Kalman filter (EKF), or the unscented Kalman filter (UKF), and employ different instruments, including the Doppler velocity log to perform the localization task. Recently, the use of payload sensors, such as cameras or forward-looking SONARs, in navigation-aiding has arisen as an interesting research field in the attempt to reduce the localization error drift. Such sensors, if used simultaneously, can provide multiple observations, which can be combined in a Kalman filtering framework to increase navigation robustness against noise sources. Navigation techniques that employ multiple devices can provide a high improvement of the estimation quality, but they can also cause an increase in terms of computational load. Consequently, strategies that can represent a tradeoff between these two conflicting goals have to be investigated. In this contribution, two different frameworks have been implemented and compared: on the one hand, a centralized iterative UKF-based navigation approach and, on the other hand, a sensor fusion framework with parallel local UKFs. The sequential (or iterated) UKF, where the correction step is iteratively performed for each available measurement, belongs to the first class of filters. The federated and the consensus-based decentralized UKFs can be categorized as the second class and they differ in the employed fusion strategy. Experimental navigation data obtained during sea trials performed at Vulcano Island, Messina, Italy has been used for offline validation. The results analysis focuses on both the navigation quality and the filter robustness against the reduction of the available measurements.

12 January 2022 in Frontiers in Neurorobotics
Verified
Journal Article
Open access
ATAlberto Topini
Alberto Topini
WSWilliam Sansom
William Sansom
Nicola SeccianiNicola Secciani
Nicola Secciani
LBLorenzo Bartalucci
Lorenzo Bartalucci
ARAlessandro Ridolfi
Alessandro Ridolfi
Benedetto AllottaBenedetto Allotta
Benedetto Allotta
Robot-based rehabilitation is consolidated as a viable and efficient practice to speed up and improve the recovery of lost functions. Several studies highlight that patients are encouraged to undergo their therapies and feel more involved in the process when collaborating with a user-friendly robotic environment. Object manipulation is a crucial element of hand rehabilitation treatments; however, as a standalone process may result in being repetitive and unstimulating in the long run. In this view, robotic devices, like hand exoskeletons, do arise as an excellent tool to boost both therapy's outcome and patient participation, especially when paired with the advantages offered by interacting with virtual reality (VR). Indeed, virtual environments can simulate real-life manipulation tasks and real-time assign a score to the patient's performance, thus providing challenging exercises while promoting training with a reward-based system. Besides, they can be easily reconfigured to match the patient's needs by manipulating exercise intensity, e.g., Assistance-As-Needed (AAN) and the required tasks. Modern VR can also render interaction forces when paired to wearable devices to give the user some sort of proprioceptive force or tactile feedback. Motivated by these considerations, a Hand Exoskeleton System (HES) has been designed to be interfaced with a variable admittance control to achieve VR-based rehabilitation tasks. The exoskeleton assists the patient's movements according to force feedback and following a reference value calculated inside the VR. Whenever the patient grasps a virtual object, the HES provides the user with a force feedback sensation. In this paper, the virtual environment, developed within the Webots framework and rendering a HES digital-twin mapping and mimicking the actual HES motion, will be described in detail. Furthermore, the admittance control strategy, which continuously varies the control parameters to best render the force sensation and adapt to the user's motion intentions, will be investigated. The proposed approach has been tested on a single subject in the framework of a pilot study.

21 October 2021 in Frontiers in Neurorobotics
Verified
Journal Article
Open access
Nicola SeccianiNicola Secciani
Nicola Secciani
CBChiara Brogi
Chiara Brogi
MPMarco Pagliai
Marco Pagliai
Francesco BuonamiciFrancesco Buonamici
Francesco Buonamici
FGFilippo Gerli
Filippo Gerli
Alessandro RidolfiAlessandro Ridolfi
Alessandro Ridolfi
Robotic devices are being employed in more and more sectors to enhance, streamline, and augment the outcomes of a wide variety of human activities. Wearable robots arise indeed as of-vital-importance tools for telerehabilitation or home assistance targeting people affected by motor disabilities. In particular, the field of “Robotics for Medicine and Healthcare” is attracting growing interest. The development of such devices is a primarily addressed topic since the increasing number of people in need of rehabilitation or assistive therapies (due to population aging) growingly weighs on the healthcare systems of the nation. Besides, the necessity to move to clinics represents an additional logistic burden for patients and their families. Among the various body parts, the hand is specially investigated since it most ensures the independence of an individual, and thus, the restoration of its dexterity is considered a high priority. In this study, the authors present the development of a fully wearable, portable, and tailor-made hand exoskeleton designed for both home assistance and telerehabilitation. Its purpose is either to assist patients during activities of daily living by running a real-time intention detection algorithm or to be used for remotely supervised or unsupervised rehabilitation sessions by performing exercises preset by therapists. Throughout the mechatronic design process, special attention has been paid to the complete wearability and comfort of the system to produce a user-friendly device capable of assisting people in their daily life or enabling recorded home rehabilitation sessions allowing the therapist to monitor the state evolution of the patient. Such a hand exoskeleton system has been designed, manufactured, and preliminarily tested on a subject affected by spinal muscular atrophy, and some results are reported at the end of the article.

5 October 2020
Verified
Conference Paper
Closed access
ETEdoardo Topini
Edoardo Topini
ATAlberto Topini
Alberto Topini
MFMatteo Franchi
Matteo Franchi
ABAlessandro Bucci
Alessandro Bucci
Nicola SeccianiNicola Secciani
Nicola Secciani
BABenedetto Allotta
Benedetto Allotta
Autonomous Underwater Vehicles (AUVs) do need to be equipped with highly-accurate and robust navigation systems in order to perform challenging operations and complex missions. Nevertheless, since the Global Positioning System (GPS) is not a feasible, functional solution in the underwater scenario, the localization task is fulfilled by employing filtering techniques - as Extended Kalman Filter (EKF) and Unscented Kalman Filter (UKF) - or Dead Reckoning (DR) strategies. Even though the specific algorithm architecture may vary, such methodologies usually rely on the direct linear speed measurements provided by specialized and expensive sensors, such as the Doppler Velocity Log (DVL). Thus, DVL failures or fallacies alongside DVL-denied environments may arise as unexpected causes for a severe malfunction of the whole navigation system. Motivated by the aforementioned considerations and the outstanding performance of Long Short-Term Memory (LSTM) neural networks in time-series regression problems, an LSTM-based DR approach has been developed to estimate the surge and sway body-fixed frame velocities, without canonically employing the DVL sensor.

1 January 2019 in International Journal of Advanced Robotic Systems
Verified
Journal Article
Open access
PDF file
Nicola SeccianiNicola Secciani
Nicola Secciani
MBMatteo Bianchi
Matteo Bianchi
EMEnrico Meli
Enrico Meli
YVYary Volpe
Yary Volpe
Alessandro RidolfiAlessandro Ridolfi
Alessandro Ridolfi
Robotics is increasingly involving many aspects of daily life and robotic-based assistance to physically impaired people is considered one of the most promising application of this largely investigated technology. However, the World Health Organization reports that, so far, only 10% of people in need can get access to the so-called assistive technology also due to its high costs. This work aims to tackle the aforementioned point presenting an innovative control strategy for a low-cost hand exoskeleton system based on surface electromyography signals. Most of the activities of daily living are, in fact, carried out thanks to the hands while the exploitation of surface electromyography signals represents a non-invasive technique in straightforwardly controlling wearable devices. Although such approach results deeply studied in literature, it has not been deeply tested on real patients yet. The main contribution of this article is hence not only to describe a novel control strategy but also to provide a detailed explanation of its implementation into a real device, ready to be used. Finally, the authors have evaluated and preliminary tested the proposed technique enrolling a patient in a single-case study.

30 September 2020
Verified
Conference Paper
Closed access
LZLeonardo Zacchini
Leonardo Zacchini
MFMatteo Franchi
Matteo Franchi
VMVincenzo Manzari
Vincenzo Manzari
MPMarco Pagliai
Marco Pagliai
Nicola SeccianiNicola Secciani
Nicola Secciani
ARAlessandro Ridolfi
Alessandro Ridolfi
In recent years, seabed inspection has become one of the most sought-after tasks for Autonomous Underwater Vehicles (AUVs) in various applications. Forward-Looking Sonars (FLS) are commonly favored over optical cameras, which are not-negligibly affected by environmental conditions, to carry out inspection and exploration tasks. Indeed, sonars are not influenced by illumination conditions and can provide high-range data at the cost of lower-resolution images compared to optical sensors. However, due to the lack of features, sonar images are often hard to interpret by using conventional image processing techniques, leading to the necessity of human operators analyzing thousands of images acquired during the AUV mission to identify the potential targets of interest. This paper reports the development of an Automatic Target Recognition (ATR) methodology to identify and localize potential targets in FLS imagery, which could help human operators in this challenging, demanding task. The Mask R-CNN (Region-based Convolutional Neural Network), which constitutes the core of the proposed solution, has been trained with a dataset acquired in May 2019 at the Naval Support and Experimentation Centre (Centro di Supporto e Sperimentazione Navale - CSSN) basin, in La Spezia (Italy). The ATR strategy was then successfully validated online in the same site in October 2019, where the targets were replaced and relocated on the seabed.