Plastic waste production around the world is increasing, which leads to global plastic waste pollution. The need for an innovative solution to reduce this pollution is inevitable. Increased recycling of plastic waste alone is not a comprehensive solution. Furthermore, decreasing fossil-based plastic usage is an important aspect of sustainability. As an alternative to fossil-based plastics in the market, bio-based plastics are gaining in popularity. According to the studies conducted, products with similar performance characteristics can be obtained using biological feedstocks instead of fossil-based sources. In particular, bioplastic production from microalgae is a new opportunity to be explored and further improved. The aim of this study is to determine the current state of bioplastic production technologies from microalgae species and reveal possible optimization opportunities in the process and application areas. Therefore, the species used as resources for bioplastic production, the microalgae cultivation methods and bioplastic material production methods from microalgae were summarized.
In the biogas plants, organic material is converted to biogas under anaerobic conditions through physical and biochemical processes. From supply of the raw material to the arrival of the products to customers, there are serial processes which should be sufficiently monitored for optimizing the efficiency of the whole process. In particular, the anaerobic digestion process, which consists of sequential complex biological reactions, requires improved monitoring to prevent inhibition. Conventional implemented methods at the biogas plants are not adequate for monitoring the operational parameters and finding the correlation between them. As Artificial Intelligence has been integrated in different areas of life, the integration of it into the biogas production process will be inevitable for the future of the biogas plant operation. This review paper first examines the need for monitoring at the biogas plants with giving details about the process and process monitoring as well. In the following sections, the current situation of implementations of Artificial Intelligence in the biogas plant operation and in the similar industries will be represented. Moreover, considering that all the information gathered from literature and operational needs, an implementation model will be presented.
Temperature management is one of the primary considerations of biogas plant operation, and influences physical and biochemical processes. An increase in the temperature leads to an increase in the hydrolysis rate of the feedstock, while it can inhibit microorganisms taking part in different stages of anaerobic digestion. Because of the complexity of the biochemical processes within the anaerobic digestion process, there is a lack of knowledge about the effects of temperature and temperature change on efficiency. Moreover, the impact of stirring directly affects the temperature distribution in the anaerobic digestion reactors. In this study, the temperature management in an industrial-scale biogas plant was examined, and the effect of small temperature changes (from the operation temperature 42 °C) on the efficiency was studied in a laboratory under two different conditions: with stirring (at 40 and 44 °C) and without stirring (at 40 and 44 °C). The examination results from the biogas plant showed that heat transfer in the reactor was not sufficient at the bottom of the digester. Adaptation of the post-digester samples to the temperature changes was more challenging than that of the digester samples. From digestate samples, higher biomethane generation could be obtained, resulting from sufficient contact between microorganisms, enzymes, and substrates. Overall, differences between these changing conditions (approx. 6 NmL CH4 g VS−1) were not significant and could be adapted by the process.
About Me
Senior Research Associate at Hamburg University of Technology
Senior Research Associate at Hamburg University of Technology