In the last few decades, hot-melt extrusion (HME) has emerged as a rapidly growing technology in the pharmaceutical industry, due to its various advantages over other fabrication routes for drug delivery systems. After the introduction of the ‘quality by design’ (QbD) approach by the Food and Drug Administration (FDA), many research studies have focused on implementing process analytical technology (PAT), including near-infrared (NIR), Raman, and UV–Vis, coupled with various machine learning algorithms, to monitor and control the HME process in real time. This review gives a comprehensive overview of the application of machine learning algorithms for HME processes, with a focus on pharmaceutical HME applications. The main current challenges in the application of machine learning algorithms for pharmaceutical processes are discussed, with potential future directions for the industry.

This work investigates real-time monitoring of extrusion-induced degradation in different grades of PLA across a range of process conditions and machine set-ups. Data on machine settings together with in-process sensor data, including temperature, pressure, and near-infrared (NIR) spectra, are used as inputs to predict the molecular weight and mechanical properties of the product. Many soft sensor approaches based on complex spectral data are essentially ‘black-box’ in nature, which can limit industrial acceptability. Hence, the focus here is on identifying an optimal approach to developing interpretable models while achieving high predictive accuracy and robustness across different process settings. The performance of a Recursive Feature Elimination (RFE) approach was compared to more common dimension reduction and regression approaches including Partial Least Squares (PLS), iterative PLS (i-PLS), Principal Component Regression (PCR), ridge regression, Least Absolute Shrinkage and Selection Operator (LASSO), and Random Forest (RF). It is shown that for medical-grade PLA processed under moisture-controlled conditions, accurate prediction of molecular weight is possible over a wide range of process conditions and different machine settings (different nozzle types for downstream fibre spinning) with an RFE-RF algorithm. Similarly, for the prediction of yield stress, RFE-RF achieved excellent predictive performance, outperforming the other approaches in terms of simplicity, interpretability, and accuracy. The features selected by the RFE model provide important insights to the process. It was found that change in molecular weight was not an important factor affecting the mechanical properties of the PLA, which is primarily related to the pressure and temperature at the latter stages of the extrusion process. The temperature at the extruder exit was also the most important predictor of degradation of the polymer molecular weight, highlighting the importance of accurate melt temperature control in the process. RFE not only outperforms more established methods as a soft sensor method, but also has significant advantages in terms of computational efficiency, simplicity, and interpretability. RFE-based soft sensors are promising for better quality control in processing thermally sensitive polymers such as PLA, in particular demonstrating for the first time the ability to monitor molecular weight degradation during processing across various machine settings.

PLA (polylactide) is a bioresorbable polymer used in implantable medical and drug delivery devices. Like other bioresorbable polymers, PLA needs to be processed carefully to avoid degradation. In this work we combine in-process temperature, pressure, and NIR spectroscopy measurements with multivariate regression methods for prediction of the mechanical strength of an extruded PLA product. The potential to use such a method as an intelligent sensor for real-time quality analysis is evaluated based on regulatory guidelines for the medical device industry. It is shown that for the predictions to be robust to processing at different times and to slight changes in the processing conditions, the fusion of both NIR and conventional process sensor data is required. Partial least squares (PLS), which is the established ’soft sensing’ method in the industry, performs the best of the linear methods but demonstrates poor reliability over the full range of processing conditions. Conversely, both random forest (RF) and support vector regression (SVR) show excellent performance for all criteria when used with a prior principal component (PC) dimension reduction step. While linear methods currently dominate for soft sensing of mixture concentrations in highly conservative, regulated industries such as the medical device industry, this work indicates that nonlinear methods may outperform them in the prediction of mechanical properties from complex physicochemical sensor data. The nonlinear methods show the potential to meet industrial standards for robustness, despite the relatively small amount of training data typically available in high-value material processing.

It is well established that Polylactic acid (PLA) based biodegradable implants have several advantages over nonbiodegradable implants. PLA based implants can be It is well established that Polylactic acid (PLA) based biodegradable implants have several advantages over nonbiodegradable implants. PLA based implants can be

This article discusses the integration of the Artificial Bee Colony (ABC) algorithm with two supervised learning methods, namely Artificial Neural Networks (ANNs) and Adaptive Network-based Fuzzy Inference System (ANFIS), for feature selection from Near-Infrared (NIR) spectra for predicting the molecular weight of medical-grade Polylactic Acid (PLA). During extrusion processing of PLA, in-line NIR spectra were captured along with extrusion process and machine setting data. With a dataset comprising 63 observations and 512 input features, appropriate machine learning tools are essential for interpreting data and selecting features to improve prediction accuracy. Initially, the ABC optimization algorithm is coupled with ANN/ANFIS to forecast PLA molecular weight. The objective functions of the ABC algorithm are to minimize the root mean square error (RMSE) between experimental and predicted PLA molecular weights while also minimizing the number of input features. Results indicate that employing ABC-ANFIS yields the lowest RMSE of 282 Da and identifies four significant parameters (NIR wavenumbers 6158 cm-1, 6310 cm-1, 6349 cm-1, and melt temperature) for prediction. These findings demonstrate the effectiveness of using the ABC algorithm with ANFIS for selecting a minimal set of features to predict PLA molecular weight with high accuracy during processing