We have studied the kinetics of electrochemical lithium intercalation and deintercalation processes at different currents in lithium iron phosphate and lithium titanate based composite materials containing fine carbon particles. The results demonstrate that lithium intercalation and deintercalation processes in the electrode materials are characterized by an overvoltage: 4 and 2 mV, respectively, for a cell with a lithium titanate based electrode and 4 and 24 mV for a lithium iron phosphate based cell. Li₄Ti₅O₁₂ solubility in Li₇Ti₅O₁₂ is 1.1% (the limit of the solid solution at Li_4.03Ti₅O₁₂), and Li₇Ti₅O₁₂ solubility in Li₄Ti₅O₁₂ is 2.5% (the limit of the solid solution at Li_6.93Ti₅O₁₂). The conductivity of the phosphate and titanate solid solutions involved in the lithium intercalation and deintercalation processes has been determined.

All-solid-state lithium batteries are a promising alternative to commercially available lithium-ion batteries due to their ability to achieve high energy density, safety, and compactness. Electrolytes are key components of all-solid-state batteries, as they are crucial in determining the batteries’ efficiency. Herein, the structure of LiM₂(PO₄)₃ (M = Ti, Ge, Zr) and lithium-ion migration mechanisms are introduced as well as different synthetic routes and doping (co-doping), and their influence on conductivity is discussed. The effective methods of reducing electrolyte/electrode interface resistance and improving ion-conducting properties are summarized. In addition, different polymer/NASICON composites are considered. The challenges and prospects of practical applications of NASICON-type lithium phosphates as electrolytes for all-solid-state batteries are discussed.

The Nafion-117 membranes in the Li⁺ form with pore-intercalated aprotonic organic solvents were prepared. The prepared materials were characterized by IR, impedance, and ⁷Li NMR spectroscopy. The solvent uptake of the membranes is shown to be controlled by the composition of organic solvents and their mixtures as well as by the conditions of the preliminary treatment of the initial membranes. For the Nafion-117 membrane, the degree of solvation can be improved by the preliminary treatment with alcohols, especially by the thermal treatment in methanol. Conductivity of the membranes is shown to increase with increasing content of the sorbed solvents. The best conductivity at 25 °C (2.5 × 10⁻³ and 1.6 × 10⁻³ S cm⁻¹) was attained for the electrolytes based on the Nafion-117 membrane in lithium form with sorbed ethylene carbonate-propylene carbonate and ethylene carbonate-dimethoxyethane mixtures, respectively.