Biodegradable PLA which is produced by polymerization of lactic acid derived from the starch of plants is a good candidate for replacing the current petroleum-based polymers such as polystyrene (PS) or Polypropylene (PP) in food packaging application. These petroleum-based polymers do contribute to large-scale environmental pollution as it is a non-degradable polymer. Being classified as Generally Recognized As Safe (GRAS) for the food contact applications, PLA film for food packaging application can be synthesized in lab-scale and mass production by using solvent casting and injection molding which are common for the thermoplastic fabrication with the fast production and low in cost. The characterization methods used for the PLA film analysis can be done by the Universal Tensile machine (UTS) in which the main characteristics of the polymer film compatibility and its performance with the combined materials have been discussed in comparison with those of pure polymer films.
In this study, a growth mechanism of vertically aligned carbon nanotubes (VACNT) on a nanostructured porous silicon template (NPSiT) was proposed based on the experimental observations obtained. Camphor oil and ferrocene (Fe) were used as a carbon source and a catalyst, respectively. The NPSiT was optimised and used as a template to synthesise VACNT. The VACNT was synthesised on NPSiT by using a double thermal chemical vapour deposition (DTCVD) method. The synthesis was also performed via a floated method in a DTCVD reactor by using an in-situ catalyst in the absence of any catalysts pre-treatment. Each of the growth mechanisms was proposed based on the TEM images obtained at different synthesis conditions. From the results, a mixed top and bottom growth model was proposed for the growth mechanism of VACNT at the pores and pillars. On the contrary, the tip growth model was proposed for the growth inside the pores, while the valley growth model was proposed for the growth within the pillars of NPSiT. Furthermore, a mixed tip and valley growth model was proposed based on the location of Fe particles. Graphical Abstract
31 December 2022 in Journal of Advanced Research in Applied Sciences and Engineering Technology
Mango suffers from numerous diseases throughout its life due to fungal growth. Primarily, mango is infected with anthracnose, a disease caused by Collectotrichum gloeosporioides. In the present study, mango fruits were coated with zinc oxide (ZnO) and tapioca starch solution at different concentrations and stored at room temperature for a week. The growth of any black spots on the outer surface of the fruit peel was observed at two-day intervals. The mixed coating material, consisting of ZnO and tapioca starch, inhibited fungal growth. The field-emission scanning microscope (FESEM) results demonstrated that the nanoparticles were uniformly coated on the mango samples. Applying the ZnO coating also effectively maintained the quality attributes and extended the shelf life of the fruits. Consequently, the ZnO and starch coating could be an alternative safe coating technique of protecting mango fruits against anthracnose infection, hence prolonging the freshness and avoiding economic losses during transportation, marketing, and storage.
18 August 2025 in Progress in Additive Manufacturing