The goal of this paper is to present a novel configuration for a three-rotor mini unmanned aerial vehicle (UAV). The proposed design incorporates advantageous structural features which enhance the maneuverability of the rotorcraft. The detailed mathematical model of the vehicle's attitude is obtained through the Newton-Euler formulation. In terms of control, we propose a control law which is robust with respect to dynamical couplings and adverse torques. The vehicle tilts simultaneously the three rotors to stabilize the yaw dynamics. The resulting control algorithm is simple for embedded purposes. A customized low-cost embedded system was developed to test an autonomous stabilized-attitude flight, obtaining satisfactory results.
A yaw angle, different from zero, introduces highly nonlinear couplings in the rotational and translational quadrotor dynamics, implying undesirable motions. This argument has motivated that the position control problem of quadrotors is studied generally regulating yaw at zero. However, zeroing yaw limits the maneuverability of underactuated quadrotors because yaw is one of the four actuated motions. In this paper, the simultaneous tracking of position and time-varying heading is proposed, based on an integral sliding mode control with a quaternion-based sliding surface. An exponential tracking with chattering-free is obtained without requiring any knowledge of the dynamic model or its parameters for implementation. Since a linear invariant orientation error manifold is enforced for all time, a time-varying gain is introduced for a well-posed finite time convergence, which is useful not only to realize the virtual position control scheme, due to underactuation, but also to guarantee a desired contact in a given point at a given desired contact time for the yaw motion. Illustrative applications are explored in a simulation study which shows the viability and versatility of position–yaw tracking in the surveillance of a field-of-view (FoV) target, aerial screw driver, and aerial grasping.
14 November 2019 in International Journal of Aerospace Engineering
This paper focuses on the aerodynamics and design of an unmanned aerial vehicle (UAV) based on solar cells as a main power source. The procedure includes three phases: the conceptual design, preliminary design, and a computational fluid dynamics analysis of the vehicle. One of the main disadvantages of an electric UAV is the flight time; in this sense, the challenge is to create an aerodynamic design that can increase the endurance of the UAV. In this research, the flight mission starts with the attempt of the vehicle design to get at the maximum altitude; then, the UAV starts to glide and battery charge recovery is achieved due to the solar cells. A conceptual design is used, and the aerodynamic analysis is focused on a UAV as a gliding vehicle, with the calculations starting with the estimation of weight and aerodynamics and finishing this stage with the best glide angle. In fact, the aerodynamic analysis is obtained for a preliminary design; this step involves the wing, fuselage, and empennage of the UAV. In order to achieve the preliminary design, an estimation of aerodynamic coefficients, along with computational fluid dynamics analysis, is performed.