Pablo N García-Fogeda

Prof. Pablo N García-Fogeda

Deparment Airframes and Space Vehícles, Universidad Politécnica de Madrid, Madrid, Spain
orcid

Research Focus & Metrics

Academic Career Length

39Years (1988-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
18 May 2023 in Aerospace
Verified
Journal Article
Open access
PDF file
KPKeyvan Salehi Paniagua
Keyvan Salehi Paniagua
Pablo N García-FogedaPablo N García-Fogeda
Pablo N García-Fogeda
FELIX AREVALOFELIX AREVALO
FELIX AREVALO
In this work, the aeroelastic stability of an aerial refueling system is investigated. The system is formed by a classical hose and drogue, and the novelty of our work is the inclusion of a grid fin configuration to improve its stability. The unsteady aerodynamic forces on the grid fins are determined using the concept of a unit grid fin (UGF). For each UGF, the unsteady aerodynamic forces are computed using the Doublet-Lattice Method, and the forces on the complete grid fins are calculated using interfering factors obtained from wind tunnel measurements for the steady case. The static equilibrium position of the system influences the linearized perturbed unsteady motion of the ensemble. This effect, together with the phase lag angle introduced to account for the unsteady aerodynamic forces in the hose, makes the flutter computation of the complete system a non-typical one. The results show that, by adding the grid fins, the stability of the refueling system is improved, delaying or annulling flutter occurrence.

1 November 2018 in Journal of Aerospace Engineering
Verified
Journal Article
Closed access
Pablo N García-FogedaPablo N García-Fogeda
Pablo N García-Fogeda
JMJ. Esteban Molina
J. Esteban Molina
FELIX AREVALOFELIX AREVALO
FELIX AREVALO
The classical hose-drogue system has been modified by adding an automated control surface (ACS) at the point where the hose is connected to the drogue. This control surface stabilizes the static position as well as improves the dynamic characteristics of the hose-drogue system. The hose is assumed to behave as a tensed cable with no bending forces. Under the assumption that the dynamic response is small compared with the static deformation, linearized expressions for both the perturbed motion of the hose in the vertical plane and the hose tension are obtained. The resulting dynamic linear equations have variable coefficients that depend on both the initial steady-state static equilibrium position and the static tension of the hose. Owing to the control surface motion, unsteady aerodynamic forces are generated. These forces depend on the drogue local vertical velocity and on the hose slope at the drogue position, and are approached by means of Theodorsen’s theory. The natural frequencies and normal modes of the complete system are calculated. In addition, the responses to the tanker oscillation/pulse excitation to gust and turbulence are obtained. Finally, the influence of the different parameters on the dynamic response of the hose-drogue–control surface system is presented.

29 February 2024 in Aerospace
Verified
Journal Article
Open access
PDF file
ÁMÁlvaro Muñoz
Álvaro Muñoz
Pablo N García-FogedaPablo N García-Fogeda
Pablo N García-Fogeda
This paper compares various procedures for determining the optimal control law for a wing section in compressible flow. The flow regime includes subsonic, sonic and supersonic flows. For the evolution of the system in the Laplace plane, the present method makes use of the exact unsteady aerodynamic forces in this plane once the control law is established. This is a great advantage over other results previously published, where the unsteady aerodynamics in the Laplace plane are merely approximations of the curve-fitted values in the frequency domain (imaginary axis). A comparison of different control techniques like pole placement, LQR and H-infinity control demonstrates that the H-infinity controller is the optimal choice, exhibiting an H-infinity norm approximately two orders of magnitude lower than the LQR case. Furthermore, the H-infinity controller demonstrates lower pole values than those of the pole placement and LQR compensator, showing the advantage of the H-infinity controller in terms of economic efficiency.

1 January 2021 in Journal of Fluids and Structures
Verified
Journal Article
Closed access
KPKeyvan Salehi Paniagua
Keyvan Salehi Paniagua
Pablo N García-FogedaPablo N García-Fogeda
Pablo N García-Fogeda
FELIX AREVALOFELIX AREVALO
FELIX AREVALO
JRJ. Barrera Rodriguez
J. Barrera Rodriguez

25 November 2019 in Nondestructive Testing and Evaluation
Verified
Journal Article
Closed access
VCV. Rafael de la Cruz
V. Rafael de la Cruz
KPK. Salehi Paniagua
K. Salehi Paniagua
PSP. Salgado Sánchez
P. Salgado Sánchez
Pablo N García-FogedaPablo N García-Fogeda
Pablo N García-Fogeda
A Vibration-Based Method for assessing the integrity of welded structures is presented. The proposed technique relies on fitting theoretical predictions of a lumped mass-based model of the welding with experimental measurements obtained from modal analysis. Experiments are performed in various test platens that are soldered at one or two locations and exhibit distinct welding qualities, achieved by using different control parameters in the welding process. The inertia added during the soldering execution is modelled by a lumped mass that connects to the structural element via linear springs. The associated rigidities play the role of fitting parameters and are adjusted to reproduce the (three) measured natural frequencies by means of optimisation algorithms. This method is successful in characterising the platens tested and provides an accurate and consistent (with the expected welding quality) quantification of their effective mechanical properties at the bond. We note that this is beyond the qualitative evaluation achieved with other extended Non-Destructive Testing techniques. Such characterisation is possible even without particular knowledge of modal shapes, whose experimental determination is difficult in any real structure, although different resonant frequencies must be considered to achieve reliable estimates. Based on the present results, we suggest that this technique can be used for assessing the overall integrity of welded structures in a quantitative and a reliable manner.

1 December 2016 in Latin American Journal of Solids and Structures
Verified
Journal Article
Open access
PDF file
PSP. Salgado Sánchez
P. Salgado Sánchez
PNP. López Negro
P. López Negro
Pablo N García-FogedaPablo N García-Fogeda
Pablo N García-Fogeda
In this work, a vibration-based method for damage detection at welded beams and rods is presented. The model of the structural element includes the effect of the added inertia due to the welding process. Two methods of solution, analytically and by means of the Finite Element Method (FEM), are presented. From the results obtained it can be asseverated that the method can be a useful tool to detect degradation of welded structures. In contrast to other existing methods for cracks detection, it is shown that several frequencies have to be taken into consideration to determine the wear characteristics of the welded elements, since depending on the location of welding, some frequencies can be very little sensitive to the reduction of rigidity at the welded section. The results presented show similar tendency to those obtained by other investigations for cracks detection when added inertia was not included.