This paper interprets the hydromechanical behaviour of a steep, forested, instrumented slope during an artificial rainfall event, which triggered a shallow slope failure 15 h after rainfall initiation. The soil's mechanical response has been simulated by coupled hydro-mechanical finite-element analyses, using a critical state constitutive model that has been extended to unsaturated conditions. Failure occurs within a colluvium shallow soil cover, characterised as a silty sand of low plasticity. The hydraulic and mechanical parameters are calibrated, based on an extended set of experimental results, ranging from water retention curve measurements to triaxial stress path tests under both saturated and unsaturated conditions. Rainfall is simulated as a water flux at the soil surface and suitable boundary conditions account for the hydromechanical interaction between the soil cover and the underlying bedrock. The results are compared with field data of the mechanistic and the hydraulic responses up to failure and are found to provide a very satisfactory prediction. The study identifies water exfiltration from bedrock fissures as the main triggering agent, resulting in increased pore pressures along the soil–bedrock interface, reduced available shear strength and cause extensive plastic straining, leading to the formation and propagation of a failure surface.

The soil-water characteristic curve plays the major role in describing both the hydraulic and mechanical behaviour of unsaturated soils. In the present study the Fredlund and Xing and van Genuchten equations have been used to model the soil-water characteristic curves of typical Greek soils including three hard soils - weak rocks. It is attempted to correlate the optimum curve fitting parameters with physical characteristics of the soils and compare parameters of soil-water characteristic curves of undisturbed and recomposed soils.

E3S Web of Conferences, open access proceedings in environment, energy and earth sciences

The paper presents a three-dimensional slope stability limit equilibrium solution for translational, planar failure modes. The proposed solution uses Bishop’s average skeleton stress combined with the Mohr – Coulomb failure criterion to describe soil strength evolution under unsaturated conditions while its formulation ensures a natural and smooth transition from the unsaturated to the saturated regime and vice versa. The proposed analytical solution is evaluated by comparing its predictions with the results of the Ruedlingen slope failure experiment [1]. The comparison suggests that despite its relative simplicity the analytical solution can capture well the experimentally observed behaviour and highlights the importance of lateral resistance consideration together with a realistic interplay between mechanical parameters (cohesion) and hydraulic (pore water pressure) conditions.