Paulo Guimarães de Moraes

Dr. Paulo Guimarães de Moraes

UNIFEI
orcid

Research Focus & Metrics

Academic Career Length

21Years (2006-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
31 August 2020 in Energies
Verified
Journal Article
Open access
PDF file
MOMarcos André de Oliveira
Marcos André de Oliveira
PMPaulo Guimarães de Moraes
Paulo Guimarães de Moraes
CACrystianne Lilian de Andrade
Crystianne Lilian de Andrade
ABAlex Bimbato
Alex Bimbato
Luiz Antonio Alcântara PereiraLuiz Antonio Alcântara Pereira
Luiz Antonio Alcântara Pereira
A discrete vortex method is implemented with a hybrid control technique of vortex shedding to solve the problem of the two-dimensional flow past a slightly rough circular cylinder in the vicinity of a moving wall. In the present approach, the passive control technique is inspired on the fundamental principle of surface roughness, promoting modifications on the cylinder geometry to affect the vortex shedding formation. A relative roughness size of ε*/d* = 0.001 (ε* is the average roughness and d* is the outer cylinder diameter) is chosen for the test cases. On the other hand, the active control technique uses a wall plane, which runs at the same speed as the free stream velocity to contribute with external energy affecting the fluid flow. The gap-to-diameter varies in the range from h*/d* = 0.05 to 0.80 (h* is the gap between the moving wall and the cylinder bottom). A detailed account of the time history of pressure distributions, simultaneously investigated with the time evolution of forces, Strouhal number behavior, and boundary layer separation are reported at upper-subcritical Reynolds number flows of Re = 1.0 × 105. The saturation state of the numerical simulations is demonstrated through the analysis of the Strouhal number behavior obtained from temporal history of the aerodynamic loads. The present work provides an improvement in the prediction of Strouhal number than other studies no using roughness model. The aerodynamic characteristics of the cylinder, as well as the control of intermittence and complete interruption of von Kármán-type vortex shedding have been better clarified.

7 December 2021 in Energies
Verified
Journal Article
Open access
PDF file
PMPaulo Guimarães de Moraes
Paulo Guimarães de Moraes
Luiz Antonio Alcântara PereiraLuiz Antonio Alcântara Pereira
Luiz Antonio Alcântara Pereira
This paper contributes by investigating surface roughness effects on temporal history of aerodynamic loads and vortex shedding frequency of two circular cylinders in tandem arrangement. The pair of cylinders is immovable; of equal outer diameter, D; and its geometry is defined by the dimensionless center-to-center pitch ratio, L/D. Thus, a distance of L/D = 4.5 is chosen to characterize the co-shedding regime, where the two shear layers of opposite signals, originated from each cylinder surface, interact generating counter-rotating vortical structures. A subcritical Reynolds number of Re = 6.5 × 104 is chosen for the test cases, which allows some comparisons with experimental results without roughness effects available in the literature. Two relative roughness heights are adopted, nominally ε/D = 0.001 and 0.007, aiming to capture the sensitivity of the applied numerical approach. Recent numerical results published in the literature have reported that the present two-dimensional model of surface roughness effects is able to capture both drag reduction and full cessation of vortex shedding for an immovable cylinder near a moving ground. That roughness model was successfully blended with a Lagrangian vortex method using sub-grid turbulence modeling. Overall, the effects of relative roughness heights on flows past two cylinders reveal changing of behavior of the vorticity dynamics, in which drag reduction, intermittence of vortex shedding, and wake destruction are identified under certain roughness effects. This kind of study is very useful for engineering conservative designs. The work is also motivated by scarcity of results previous discussing flows past cylinders in cross flow with surface roughness effects.

17 February 2020 in Journal of the Brazilian Society of Mechanical Sciences and Engineering
Verified
Journal Article
Closed access
Luiz Antonio Alcântara PereiraLuiz Antonio Alcântara Pereira
Luiz Antonio Alcântara Pereira
MOMarcos André de Oliveira
Marcos André de Oliveira
PMPaulo Guimarães de Moraes
Paulo Guimarães de Moraes
ABAlex Bimbato
Alex Bimbato

23 September 2022 in Energies
Verified
Journal Article
Open access
PDF file
PMPaulo Guimarães de Moraes
Paulo Guimarães de Moraes
MOMarcos André de Oliveira
Marcos André de Oliveira
ABAlex Bimbato
Alex Bimbato
Luiz Antonio Alcântara PereiraLuiz Antonio Alcântara Pereira
Luiz Antonio Alcântara Pereira
The present paper introduces the key ideas of a purely Lagrangian temperature particle method, which includes preheating effects on fluid flow nearest a heated wall. The numerical approach is then applied for the study of mixed heat transfer on aircraft wake vortices from wing tips in the vicinity of a heated ground plane, a situation commonly found during landing or takeoff operations at airports around the world. It was found in the literature experimental results of an investigation without the effects of heat transfer and crosswind, which were useful for a comparison with some present numerical results. Other numerical results are also discussed, focusing on the physics of the effects of mixed convection heat transfer and crosswind. As a contribution, the Richardson number is defined in terms of both aircraft wingspan and constant ground plane temperature, being the most important dimensionless group to capture the effects of laminar ascending mixed convection flow. The present methodology presents potentialities for predicting the transport and decay of primary vortical structures (under buoyancy forces), including their interaction with secondary vortical structures generated from a ground plane.

25 July 2021 in Journal of the Brazilian Society of Mechanical Sciences and Engineering
Verified
Journal Article
Closed access
PDF file
PMPaulo Guimarães de Moraes
Paulo Guimarães de Moraes
MOMarcos André de Oliveira
Marcos André de Oliveira
CACrystianne Lilian de Andrade
Crystianne Lilian de Andrade
ABAlex Mendonça Bimbato
Alex Mendonça Bimbato
Luiz Antonio Alcântara PereiraLuiz Antonio Alcântara Pereira
Luiz Antonio Alcântara Pereira

2 October 2006
Verified
Conference Paper
Closed access
PMPaulo Guimarães de Moraes
Paulo Guimarães de Moraes
DCDomingos S. Carrijo
Domingos S. Carrijo
AGAlexandre Garcia
Alexandre Garcia
LCLuis E. Loures da Costa
Luis E. Loures da Costa
UOUlisses C. Oliveira
Ulisses C. Oliveira
MYMauro Kochi Yamamoto
Mauro Kochi Yamamoto