The contact surface of the wheel with the airport surface is important for the safety of flight operations in the ground manoeuvring area. The area of the contact surface, its shape and stress distribution at the pavement surface are the subject of many scientists’ considerations. However, there are only a few research studies which include pressure and vertical load directly and its influence on tire-pavement contact area. There are no research studies which take into account aircraft tires. This work is a piece of an extensive research project which aims to develop a device and a method for continuous measurement of the natural airport pavement’s load capacity. One of the work elements was to estimate the relationship between wheel pressure and wheel pressure on the surface, and the area of the contact surface. The results of the research are presented in this article. Global experience in this field is cited at the beginning of the article. Then, the theoretical basis for calculating the wheel with the road surface contact area was presented. Next, the author’s research views and measurement method are presented. Finally, the obtained test results and comments are shown. The tests were carried out for four types of tires. Two of them were airplane tires from the PZL M28 Skytruck/Bryza and Sukhoi Su-22 aircraft. Two more came from the airport ASFT (airport surface friction tester) friction tester-one smooth ASTM; the other smooth retreaded type T520. The tires were tested in a pressure range from 200 to 800 kPa. The range of vertical wheel load on the pavement was 3.23–25.93 kN for airplane tires, and 0.8–4.0 kN for friction tester tires. The tests proved a significant influence of the wheel pressure value and wheel pressure on the surface on the obtained contact surface area of the wheel with the surface. In addition, it was noted that the final shape and size of the contact surface is affected by factors other than wheel pressure, tire pressure and dimensions.

Airoport infrastructure development requires care to maintain it in proper technical condition. Due to this, airport pavements should be constantly monitored, and, above all, correctly managed. High-level airport pavement management requires access to reliable information about their current technical condition as well as proper forecasting of this condition in the future. Obtaining good quality information about the technical condition of airport pavement should be based on a proven methodology, taking into account the introduced quality management system. The authors propose a method of technical pavement condition assessment based on the Airfield Pavement Condition Index (APCI), taking into account not only the results of the surface deterioration inventory, but also repair overviews, load bearing capacity, evenness and roughness of the surface, as well as the surface tensile bond strength. The method was developed during long-term work financed by the Ministry of Science and Higher Education. At the beginning of the article, the authors focus on reviewing the currently available methods of assessing the technical condition of the pavement. Then they briefly present the most popular surface assessment method based on the PCI indicator. Afterwards, a proprietary asphalt pavement assessment method based on the APCI indicator is proposed and an example of how to use the method is presented. Finally, they discuss the results and summarize the work done, and present further directions of work.

The assessment of the anti-skid properties of airfield pavements is one of the elements in the process of determining their current technical condition, which is important in terms of the safety of air operations. The condition of the pavement should be qualified on the basis of the specified and required values (criteria), in this case, the coefficient of friction and the depth of the texture. Unfortunately, in practice, the assessment of the texture of new airfield pavements raises some doubts with regard to the existing requirements. The work presents an analysis of the results of texture tests for new airfield pavements in relation to current requirements. In addition, the authors proposed a new criterion of average texture depth for new airfield pavements, based on actual field measurement results. Field studies used an innovative method of assessing anti-skid properties with a measuring system that allows simultaneous measurement of the coefficient of friction, μ, and the new continuous coefficient of average profile depth and texture CMPTD, from which MPD (Mean Profile Depth) and ETD (Estimated Texture Depth) can be determined. The results of the tests cast doubt on the possibility of obtaining the average texture depth (currently 1.00 mm) required for new airfield pavements.

Many factors have an impact on flight operation safety and air transport participants life. This article presents one of them, which is maintenance of the airport infrastructure in a good condition, with proper infrastructure management, in particular of cash and human resources. At the beginning of the article, attention is paid to the aspect of safety and human life in air transport. Also, an overview of world experience in the field of assessment of the technical condition of airport pavements was presented, including the standard method of the Pavement Condition Index (PCI) estimation. Then, the authors propose an innovative method of assessing the condition of airport pavements based on the Airfield Pavement Condition Index (APCI), taking into account, apart from the extent of surface damage, such parameters as load capacity, evenness, roughness, and bond strength. This approach gives a broader picture of the actual condition of the airport pavement, which has a great importance on flight operation safety, including passengers and cruel life. Next the described research method is experimentally verified in real conditions at Polish airports. Finally, an example of using the APCI method in the assessment of selected airport pavements from Polish airports is presented. The results of tests performed on five functional elements of a military airfield are presented. A satisfactory result is obtained for three elements, an adequate—for two.

Natural pavements are an important element of flights. Among other things, they allow the plane to be safely slowed down after it has exited the runway. For this reason, load bearing capacity of natural airfield pavements and strength of turf layer at a specified level are required. Currently used testing methods, such as CBR (Californian Bearing Ratio) tests or turf probe test, separately do not give a full image of pavement technical condition. The authors presented the methodology for assessing the technical condition of natural airfield surfaces based on the APCI (Airfield Pavement Condition Index). The index is based at the same time on the load bearing capacity of the surface layer up to 0.85 m and turf layer strength. The mathematical model and the classification of airfield pavements in terms of the APCI indicator are presented. The article also presents an example of using the APCI method to assess shoulders and end safety areas of the runway at one of the operating airport facilities.

The safety of traffic, including both road and air traffic on a ground manoeuvre area, depends on many factors. These mainly include the anti-slip properties of a road or airfield pavement on which the traffic takes place. The basic pavement parameter that determines its characteristics in terms of anti-slip properties is the skid resistance, which constitutes the ratio of the wheel downforce and the friction on the contact surface. There are currently many devices for continuous measurement of the skid resistance (Continuous Friction-Measuring Equipment - CFME) around the world. Most of them, in principle, do not vary much from one another. Most of the devices measure the measuring wheel's downforce on the pavement and the friction on the wheel-pavement contact surface. The skid resistance is the result of this measurement. The devices vary in many aspects, such as the type and size of the used measuring tyre, pavement-wheel slip or tyre pressure. This does not mean that the results obtained from various devices mbe directly compared. On the other hand, each device allows determining the pavement's anti-slip conditions in terms of the requirements specified for the given type of devices, thereby enabling pavement classification in these terms. The classification allows for comparing the results obtained from various measuring devices. The paper presents an overview of equipment used in Poland and around the world to measure the skid resistance on airfield pavements. The authors draw attention to the requirements for pavements in terms of their roughness, with division into road and airfield pavements.