The use of standard Enhanced Oil Recovery (EOR) techniques allows improving the oilfield performance after waterflooding processes. Chemical EOR methods modify different properties of fluids and/or rock to mobilize the remaining oil. Moreover, combined techniques have been developed to maximize the performance by using the joint properties of the chemical slugs. A new simulator is presented to study a Surfactant-Polymer flooding, based on a two-phase, five-component system (aqueous and oleous phases with water, petroleum, polymer, surfactant and salt) for a 2D reservoir model. The physical properties modified by these chemicals are considered as well as the synergy between them. The analysis of the chemical injection strategy is deemed vital for the success of the operations. This plays a major role in the efficiency of the recovery process, including the order and the time gap between each chemical slug injection. As the latter is increased, the flooding tends to behave as two separate processes. Best results are found when both slugs are injected overlapped, with the polymer in first place which improves the sweeping efficiency of the viscous oil. This simulator can be used to study different chemical combinations and their injection procedure to optimize the EOR process.

During the past half-century, the prefix “nano” attached to several words, such as “technology”, “motors”, “device”, and so on has denoted cutting-edge research fields and topics at the forefront of classical scientific disciplines. Possible application fields have been frequently evoked, even if real-life examples are still difficult to find. The present review analyzes how nanotechnology is utilized in enhanced oil recovery (EOR) processes so as to increase the efficiency of mature oilfields. Nanotechnology in EOR is classified into three categories: nanoparticles/nanofluids, nanoemulsions, and nanocatalysts. The advantages at the nanoscale are also described and discussed, including an overview of manufacturing methods as well as the concerns about their possible environmental impacts. Clearly, nanotechnology has the potential to boost EOR techniques, although there are still many questions and drawbacks to be tackled.

The traditional Enhanced Oil Recovery (EOR) processes allow improving the performance of mature oilfields after waterflooding projects. Chemical EOR processes modify different physical properties of the fluids and/or the rock in order to mobilize the oil that remains trapped. Furthermore, combined processes have been proposed to improve the performance, using the properties and synergy of the chemical agents. This paper presents a novel simulator developed for a combined surfactant/polymer flooding in EOR processes. It studies the flow of a two-phase, five-component system (aqueous and organic phases with water, petroleum, surfactant, polymer and salt) in porous media. Polymer and surfactant together affect each other’s interfacial and rheological properties as well as the adsorption rates. This is known in the industry as Surfactant-Polymer Interaction (SPI). The simulations showed that optimum results occur when both chemical agents are injected overlapped, with the polymer in the first place. This procedure decreases the surfactant’s adsorption rates, rendering higher recovery factors. The presence of the salt as fifth component slightly modifies the adsorption rates of both polymer and surfactant, but its influence on the phase behavior allows increasing the surfactant’s sweep efficiency.