The article describes an Arduino-based, portable, remotely usable weather monitoring station capable of measuring temperature, relative humidity, pressure, and carbon monoxide (CO) concentration and transmitting the collected data to the Cloud through the mobile telephony network. The main modules of the station are as follows: a DHT11 sensor for temperature and relative humidity sensing, a BMP180 sensor for pressure monitoring (with temperature compensation), a MQ7 sensor for the monitoring of the CO concentration, an Arduino Uno board, a GSM SIM900 module, and a buzzer, which is activated when the temperature exceeds 35 °C. The station operates as follows: the Arduino Uno board gathers the data collected by the sensors and, by means of the GSM SIM900 module, it transmits the data to the Cloud by using the mobile telephony network as well as the ThingSpeak software which is an open-code IoT application that, among others, enables saving and recovering of sensing and monitoring data. The main novelty of this work is the combined use of the GSM network and the Cloud which enhances the portability and usability of the proposed system and enables remote collection of data in a straightforward way. Additional merits of the system are the easiness and the low cost of its development (owing to the easily available, low-cost hardware combined with an open-code software) as well as its modularity and scalability which allows its customization depending on specific application it is intended for. The system could be used for real-time, remote monitoring of essential environmental parameters in spaces such as farms, warehouses, rooms etc.
This paper addresses two safety issues regarding smart vehicles: that of intoxicated drivers (one of the most common causes for car accidents) and that of theft. More specifically, it presents the design and implementation of an intelligent system based on the Arduino-Mega2560 board. The issue of intoxicated drivers is addressed by using an MQ3 alcohol sensor that is capable of sensing the driver’s breath and a relay that immobilizes the vehicle if it detects alcohol above the permissible limit. Regarding theft, there are two safety layers: the first layer uses a fingerprint sensor which would not let the vehicle move unless the user is authenticated, while the second layer includes a GPS module that collects the information about the vehicle’s location and, through an incorporated GSM module, transmits the location data to an Internet-of-Things (IoT) server. The main contribution of the proposed system is that it treats two essential safety-security issues (drunk driving and theft) at the same time with the additional merits of low-cost implementation and easy placement and use within a vehicle.