Limited studies have explored different extraction techniques that improve cannabis extraction with scale-up potential. Ultrasound-assisted and microwave-assisted extraction were evaluated to maximize the yield and concentration of cannabinoids and terpenes. A central composite rotatable design was used to optimize independent factors (sample-to-solvent ratio, extraction time, extraction temperature, and duty cycle). The optimal conditions for ultrasound- and microwave-assisted extraction were the sample-to-solvent ratios of 1:15 and 1:14.4, respectively, for 30 min at 60 °C. Ultrasound-assisted extraction yielded 14.4% and 14.2% more oil and terpenes, respectively, compared with microwave-assisted extracts. Ultrasound-assisted extraction increased cannabinoid concentration from 13.2–39.2%. Considering reference ground samples, tetrahydrocannabinolic acid increased from 17.9 (g 100 g dry matter−1) to 28.5 and 20 with extraction efficiencies of 159.2% and 111.4% for ultrasound-assisted and microwave-assisted extraction, respectively. Principal component analyses indicate that the first two principal components accounted for 96.6% of the total variance (PC1 = 93.2% and PC2 = 3.4%) for ultrasound-assisted extraction and 92.4% of the total variance (PC1 = 85.4% and PC2 = 7%) for microwave-assisted extraction. Sample-to-solvent ratios significantly (p < 0.05) influenced the secondary metabolite profiles and yields for ultrasound-assisted extracts, but not microwave-assisted extracts.
Efficient cannabis biomass extraction can increase yield while reducing costs and minimizing waste. Cold ethanol extraction was evaluated to maximize yield and concentrations of cannabinoids and terpenes at different temperatures. Central composite rotatable design was used to optimize two independent factors: sample-to-solvent ratio (1:2.9 to 1:17.1) and extraction time (5.7 min–34.1 min). With response surface methodology, predicted optimal conditions at different extraction temperatures were a cannabis-to-ethanol ratio of 1:15 and a 10 min extraction time. With these conditions, yields (g 100 g dry matter−1) were 18.2, 19.7, and 18.5 for −20 °C, −40 °C and room temperature, respectively. Compared to the reference ground sample, tetrahydrocannabinolic acid changed from 17.9 (g 100 g dry matter−1) to 15, 17.5, and 18.3 with an extraction efficiency of 83.6%, 97.7%, 102.1% for −20 °C, −40 °C, and room temperature, respectively. Terpene content decreased by 54.1% and 32.2% for extraction at −20 °C and room temperature, respectively, compared to extraction at −40 °C. Principal component analysis showed that principal component 1 and principal component 2 account for 88% and 7.31% of total variance, respectively, although no significant differences in cold ethanol extraction at different temperatures were observed.
The visible light spectrum (400-700 nm) powers plant photosynthesis and innumerable other biological processes. Photosynthesis curves plotted by pioneering photobiologists show that amber light (590-620 nm) induces the highest photosynthetic rates in this spectrum. Yet, both red and blue light are viewed superior in their influence over plant growth. Here we report two approaches for quantifying how light wavelength photosynthesis and plant growth using light emitting diodes (LEDs). Resolved quantum yield spectra of tomato and lettuce plants resemble those acquired earlier, showing high quantum utilization efficiencies in the 420-430 nm and 590-620 nm regions. Tomato plants grown under blue (445 nm), amber (595 nm), red (635 nm), and combined red-blue-amber light for 14 days show that amber light yields higher fresh and dry mass, by at least 20%. Principle component analysis shows that amber light has a more pronounced and direct effect on fresh mass, whereas red light has a major effect on dry mass. These data clarify amber light's primary role in photosynthesis and suggest that bandwidth determines plant growth and productivity under sole amber lighting. Findings set precedence for future work aimed at maximizing plant productivity, with widespread implications for controlled environment agriculture.
Watermelon (Citrullus lanatus) seeds are often discarded while the fruit is eaten. However, previous studies have shown watermelon seeds as considerable source of food for human nutrition and health. In the present study, seeds of three (3) varieties of watermelons (Kaolak, Crimson sweet and Sugar baby) were analysed for their moisture content and antinutrients; oxalate, phytate and tannin levels. The oxalate, phytate and tannin contents were determined by means of potassium permanganate titration method, Iron (I) chloride titration method and Folin-Ciocalteau assay, respectively. The seeds were also boiled-oven dried and roasted to determine the effects of the processing on the antinutrient levels. Results indicated that the fresh watermelon seeds had moisture content in the range of 10.81-12.04%; oxalate, 0.43-0.48 g/100g db; phytate, 0.23-0.30 g/100g db and tannin, 5.06-6.45 g/100g db. The boiling-oven drying and roasting significantly reduced the levels of the antinutrients. Decrease in the oxalate levels was in the range of 92-96% for boiled-oven dried samples and 49-64% for roasted samples. Decrease in the phytate levels ranged 58-76% and 73-82% for boiled-oven dried and roasted samples, respectively. However, decrease in the tannin levels ranged 15-35% for boiled-oven dried samples and 23-38% for roasted samples. The present findings suggest watermelon seeds contain antinutrients which are minor components and can be reduced by boiling and roasting of the seeds.