Piotr Staciwa

Dr. Piotr Staciwa

orcid

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
23 August 2019 in Polymers
Verified
Journal Article
Open access
PDF file
Magdalena ZdanowiczMagdalena Zdanowicz
Magdalena Zdanowicz
PSPiotr Staciwa
Piotr Staciwa
RJRoman Jedrzejewski
Roman Jedrzejewski
TSTadeusz Spychaj
Tadeusz Spychaj
The aim of this work was to prepare sugar alcohol-based deep eutectic solvents (DES) and test them as starch plasticizers. Thermoplastic starch (TPS) films were obtained via a simple and convenient thermocompression method. Influence of starch/DES premixtures conditioning (preheating, storage time) on TPS properties was investigated. TPS/sorbitol (S)-based DES exhibited similar tensile strength (TS) (8.6 MPa) but twice higher elongation at the break (ε) (33%) when compared with TPS plasticized only with S. Extra treatment, i.e., heating or prolonged storage time, facilitated starch/DES plasticizing. Starch with selected DES was also extruded and the influence of preconditioning and extrusion rotational speed were subsequently studied on thermocompressed films. Extrusion at 100 rpm led to films with TS up to ca. 10 MPa and ε up to 52%. Some differences in film samples morphology obtained via two processing methods were observed. X-ray diffractograms revealed that extruded samples exhibited a V-type peak at 18.2°, with intensity depending on plasticizer total molecular size. Applied techniques (mechanical tests, XRD, Dynamic Mechanical Analysis (DMA), FTIR-Attenuated Total Reflection (ATR), and moisture sorption) indicated that S-based DES forms stronger interactions with starch than glycerol (G) only used as conventional plasticizer, thus leading to better mechanical properties and inhibited tendency to starch recrystallization (studied up to one year).

18 February 2022 in Molecules
Verified
Journal Article
Open access
PDF file
IPIwona Pelech
Iwona Pelech
PSPiotr Staciwa
Piotr Staciwa
DSDaniel Sibera
Daniel Sibera
Ewelina Kusiak-NejmanEwelina Kusiak-Nejman
Ewelina Kusiak-Nejman
Antoni W. MorawskiAntoni W. Morawski
Antoni W. Morawski
NNNARKIEWICZ NARKIEWICZ
NARKIEWICZ NARKIEWICZ
Zinc chloride and potassium oxalate are often applied as activating agents for carbon materials. In this work, we present the preparation of ZnO/carbon spheres composites using resorcinol-formaldehyde resin as a carbon source in a solvothermal reactor heated with microwaves. Zinc chloride as a zinc oxide source and potassium oxalate as an activating agent were applied. The effect of their addition and preparation conditions on the adsorption properties towards carbon dioxide at 0 °C and 25 °C were investigated. Additionally, for all tested sorbents, the CO2 sorption tests at 40 °C, carried out utilizing a thermobalance, confirmed the trend of sorption capacity measured at 0 and 25 °C. Furthermore, the sample activated using potassium oxalate and modified using zinc chloride (a carbon-to-zinc ratio equal to 10:1) displayed not only a high CO2 adsorption capacity (2.69 mmol CO2/g at 40 °C) but also exhibited a stable performance during the consecutive multicycle adsorption–desorption process.

3 September 2023 in Catalysts
Verified
Journal Article
Open access
PDF file
Antoni W. MorawskiAntoni W. Morawski
Antoni W. Morawski
Marcin GanoMarcin Gano
Marcin Gano
KĆKatarzyna Ćmielewska
Katarzyna Ćmielewska
Ewelina Kusiak-NejmanEwelina Kusiak-Nejman
Ewelina Kusiak-Nejman
IPIwona Pelech
Iwona Pelech
NNNARKIEWICZ NARKIEWICZ
NARKIEWICZ NARKIEWICZ
In the face of increasing global carbon dioxide emissions and the urgent need to mitigate climate change, the development of efficient and sustainable strategies for CO2 conversion has gained significant attention. One of the methods of eliminating the harmful effects of CO2 is its photoreduction. In this paper, ZnO was used as an effective photocatalyst for the photoreduction of CO2 in a gas-phase system. The influence of particle size on the process efficiency was investigated. The ZnO materials applied in the studies were characterized using XRD, SEM, and low-temperature nitrogen adsorption (BET) methods. The pore volume distribution was calculated based on the DFT method. The investigation confirmed that it had a significant impact on the formation of the product of photocatalysis carbon dioxide. The main identified product was carbon monoxide. Hydrogen and methane were detected as well. Based on the results, it was found that the process efficiency was enhanced with decreasing ZnO particle size, and the most effective catalyst for the photoreduction of CO2 was the ZnO sample with the smallest particle size (18 nm).

28 October 2021 in Materials
Verified
Journal Article
Open access
PDF file
IPIwona Pelech
Iwona Pelech
DSDaniel Sibera
Daniel Sibera
PSPiotr Staciwa
Piotr Staciwa
Ewelina Kusiak-NejmanEwelina Kusiak-Nejman
Ewelina Kusiak-Nejman
JKJoanna Kapica-Kozar
Joanna Kapica-Kozar
Antoni W. MorawskiAntoni W. Morawski
Antoni W. Morawski
This paper examines the synthesis of the ZnO/carbon spheres composites using resorcinol—formaldehyde resin as a carbon source and zinc nitrate as a zinc oxide source in a solvothermal reactor heated with microwaves. The influence of activation with potassium oxalate and modification with zinc nitrate on the physicochemical properties of the obtained materials and CO2 adsorption capacity was investigated. It was found that in the case of nonactivated material as well as activated materials, the presence of zinc oxide in the carbon matrix had no effect or slightly increased the values of CO2 adsorption capacity. Only for the material where the weight ratio of carbon:zinc was 2:1, the decrease of CO2 adsorption capacity was reported. Additionally, CO2 adsorption experiments on nonactivated carbon spheres and those activated with potassium oxalate with different amounts of zinc nitrate were carried out at 40 °C using thermobalance. The highest CO2 adsorption capacity at temperature 40 °C (2.08 mmol/g adsorbent) was achieved for the material after activation with potassium oxalate with the highest zinc nitrate content as ZnO precursor. Moreover, repeated adsorption/desorption cycle experiments revealed that the as-prepared carbon spheres were very good CO2 adsorbents, exhibiting excellent cyclic stability with a performance decay of less than 10% over up to 25 adsorption-desorption cycles.

15 November 2020 in Molecules
Verified
Journal Article
Open access
PDF file
IPIwona Pelech
Iwona Pelech
DSDaniel Sibera
Daniel Sibera
PSPiotr Staciwa
Piotr Staciwa
NNNARKIEWICZ NARKIEWICZ
NARKIEWICZ NARKIEWICZ
Robert CormiaRobert Cormia
Robert Cormia
In this work, low-pressure synthesis of carbon spheres from resorcinol and formaldehyde using an autoclave is presented. The influence of reaction time and process temperature as well as the effect of potassium oxalate, an activator, on the morphology and CO2 adsorption properties was studied. The properties of materials produced at pressureless (atmospheric) conditions were compared with those synthesized under higher pressures. The results of this work show that enhanced pressure treatment is not necessary to produce high-quality carbon spheres, and the morphology and porosity of the spheres produced without an activation step at pressureless conditions are not significantly different from those obtained at higher pressures. In addition, CO2 uptake was not affected by elevated pressure synthesis. It was also demonstrated that addition of the activator (potassium oxalate) had much more effect on key properties than the applied pressure treatment. The use of potassium oxalate as an activator caused non-uniform size distribution of spherical particles. Simultaneously higher values of surface area and total pore volumes were reached. A pressure treatment of the carbon materials in the autoclave significantly enhanced the CO2 uptake at 25 °C, but had no effect on it at 0 °C.

28 December 2021 in Catalysts
Verified
Journal Article
Open access
PDF file
Antoni W. MorawskiAntoni W. Morawski
Antoni W. Morawski
KĆKatarzyna Ćmielewska
Katarzyna Ćmielewska
KWKordian Witkowski
Kordian Witkowski
Ewelina Kusiak-NejmanEwelina Kusiak-Nejman
Ewelina Kusiak-Nejman
IPIwona Pelech
Iwona Pelech
NNNARKIEWICZ NARKIEWICZ
NARKIEWICZ NARKIEWICZ
A new photocatalyst for CO2 reduction has been presented. The photocatalyst was prepared from a combination of a commercial P25 with a mesopore structure and carbon spheres with a microporous structure with high CO2 adsorption capacity. Then, the obtained hybrid TiO2-carbon sphere photocatalysts were deposited on a glass fiber fabric. The combined TiO2-carbon spheres/silica cloth photocatalysts showed higher efficiency in the two-electron CO2 reduction towards CO than in the eight-electron reaction to methane. The 0.5 g graphitic carbon spheres combined with 1 g of TiO2 P25 resulted in almost 100% selectivity to CO. From a practical point of view, this is promising as it economically eliminates the need to separate CO from the gas mixture after the reaction, which also contains CH4 and H2.