Despite the strengthening of vehicle emissions standards and test methods, nitrogen oxide (NOx) emissions from on-road mobile sources are not being notably reduced. The introduction of real driving emission (RDE) regulations is expected to reduce the discrepancy between emission regulations and actual air pollution. To analyze the effects of RDE regulations on heavy-duty diesel vehicles, pollutants emitted while driving were measured using a portable emission measurement system (PEMS) for Euro 5 and Euro 6 vehicles, which were produced before and after RDE regulations, respectively. NOx emissions were compared as a function of emissions allowance standards, gross vehicle weight (GVW), average vehicle speed, and ambient temperature. NOx emissions from Euro 6 vehicles were found to be low, regardless of GVW; emissions from both vehicular categories increased with a decline in the average speed. To reflect real road driving characteristics more broadly in the RDE test method for heavy-duty vehicles, it is necessary to consider engine power, which is a criterion for classifying effective sections, in the moving average window (MAW) analysis method, as well as including cold start conditions.

In order to mitigate carbon dioxide (CO₂) emissions, policy action that addresses vehicle emissions is essential. While many previous studies have focused on light-duty vehicles (LDV), little is known about medium- and heavy-duty vehicles (MHDV). This study lays the groundwork for future MHDV investigations in the Republic of Korea by developing an MHDV CO₂ emissions inventory. The bottom-up approach was used to calculate national CO₂ emissions. Simulation methods that calculated the CO₂ emissions of each vehicle and statistical data, such as vehicle miles traveled (VMT) and the number of registered vehicles were used to predict CO₂ emissions. The validity of this simulation model was examined by comparing it with the chassis dynamometer test results. The results of this study showed that the CO₂ emissions of MHDV in 2015 were 24.47 million tons, which was 25.5% of the total road transportation CO₂ emissions, despite only comprising 4.2% of the total vehicles. Trucks emitted 69.6% and buses emitted 30.4% of the total MHDV CO₂ emissions. Using the results between 2012 and 2015, the level of business-as-usual (BAU) CO₂ emissions will be 25.37 million tons in 2020.

In Korea’s air pollutant inventory, construction machinery is a major emission source in the non-road sector. Since 2004, the Korean government has introduced and reinforced emission regulations to reduce the air pollutants emitted from their diesel engines. Since the engine dynamometer test method used in emission regulations has limitations in reflecting emission characteristics under the diverse working conditions of construction machinery, it is necessary to examine the effectiveness of emission regulations and the validity of the emission factors applied as inputs to the air pollutants inventory. This could be done by evaluating engine operation and emission characteristics under real-world working conditions. In this study, 14 units were selected among the excavators, wheel loaders, and forklifts that represent approximately 90% of the registered construction machines in Korea. They were equipped with a portable emission measurement system (PEMS) to measure gaseous emissions and collect engine data under various real-world working conditions. With the reinforcement of emission regulations for the construction machinery from K-tier3 to K-tier4 in Korea, exhaust after-treatment technologies, such as selective catalytic reduction and diesel oxidation catalyst, were applied. Real world NOx was reduced by approximately 83%, and THC 77% and CO by 73%, respectively. Real world NOx + THC of the K-tier3 machines exceeded the laboratory emission limit, but the K-tier4 machines considerably improved, 20% for excavator (124 kW), 61% for excavator (90 kW), 90% for wheel loader (202 kW) and 21% for Fork-lift (55 kW), despite some differences. The emission factors applied to the air pollutant inventory have been developed using the engine dynamometer test method, but they were considerably underestimated compared with emissions under real-world working conditions. The difference was even larger for the K-tier4 machines. In this study, the possibility of developing emission factor equations that use the engine load factor as a parameter was confirmed by using the engine work 1 g/kW·h segment moving averaging window (MAW) method.

This study aimed to develop on-road NOx emission factors for Euro 6b light-duty diesel trucks (LDDTs) in Korea. On-road NOx emissions were measured using portable emissions measurement systems and compared with those measured using the Korean Driving Cycle (KDC), the conventional laboratory test used to develop emission factors. To ensure the representativeness of the LDDTs emission factors, five vehicles of three models were driven along two real driving routes for total traveled mileage of 2280 km. On-road NOx levels were 2.1 to 6.9 times higher on average than those measured using the KDC because the latter does not cover the wide variability in vehicle speed and relative positive acceleration, common in real driving conditions. The lean-NOx trap was found to have disappointingly low NOx reduction efficiency in on-road driving. The on-road NOx emission factors by vehicle speeds developed in this study were comparable to the COPERT 4 factors.

Estimation on the Emission Reduction of SULEV LPG Vehicles SULEV;ULEV;LPG vehicle;Vehicle emission;Green house gas;VOCs; SULEV (Super Ultra Low Emission Vehicle) which is one of the emission standards in Fleet Average System introduced to Korea from 2009 is known as the most severe standard to achieve with internal combustion engine. Considering low sales volume of hybrid vehicles in Korea, vehicle manufacturers are required to develop SULEV technologies for conventional gasoline and LPG vehicles to meet the future Fleet Average standard. In this study, the comparison of emissions has been made between SULEV developed and ULEV LPG vehicles mainly produced in this time. To estimate the emission reduction of SULEV vehicles, CVS-75 and NIER test modes have been used. CVS-75 has been used for emission certification of gasoline and LPG vehicles. NIER modes cover various average vehicle speed and reflect Korean real driving patterns better than CVS-75. The test results show that SULEV LPG vehicles have very high potential to reduce $NO_x$ in regulated emissions, $N_2O$ in green house gases and toluene in VOCs. However, SULEV LPG vehicles don't affect much on the reduction of CO and total green house gases.