This study investigates the impact of microphone placement on honey bee audio monitoring for time-of-day classification, a key step toward automated activity monitoring and anomaly detection. Recognizing the time-dependent nature of bee behavior, we aimed to establish a baseline diurnal pattern recognition method. A custom apparatus enabled simultaneous audio acquisition from internal (brood frame, protected from propolization) and external hive locations. Sound signals were preprocessed using Power Spectral Density (PSD). Extra Trees and Convolutional Neural Network (CNN) classifiers were trained to identify diurnal activity patterns. Analysis focused on feature importance, particularly spectral characteristics. Interestingly, Extra Trees performance varied significantly. While achieving near-perfect accuracy (98–99%) with internal recordings, its accuracy was considerably lower (61–72%) with external recordings, even lower than CNNs trained on the same data (76–87%). Further investigation using Extra Trees and feature selection methods using Mean Decrease Impurity (MDI) and Recursive Feature Elimination with Cross-Validation (RFECV) revealed the importance of the 100–600 Hz band, with peaks around 100 Hz and 300 Hz. These findings inform future monitoring setups, suggesting potential for reduced sampling frequencies and underlining the need for monitoring of sound inside the beehive in order to validate methods being tested.
Honeybee audio analysis is a rapidly evolving field, where different predictive methods show great promise in both simple identification problems and complex prediction scenarios. Understanding the components of the signals generated by honeybees is an important step in developing advanced and robust prediction methods for beekeeping. This work deals with an investigation of the impact of time of day on audio signals recorded inside and outside the beehive. The influence of time of day on recorded audio is discussed, and a statistical analysis of the influencing factors is performed. Signal characteristics included both spectral methods as well as entropy-based parameters. The investigation found that there exist statistically significant differences between features when categorised by time-of-day and microphone location. It was also shown that entropy-based methods may prove useful in analysing honeybee audio signals.
Honey bees are essential both for many global ecosystems and apicultural production. The management of bee colonies remains labour-intensive, which drives a need for automated solutions. This work presents a proof-of-concept system to monitor honey bee activity by identifying the yearly lifecycle stages exhibited by the colony. A non-invasive vibration monitoring system was developed and placed on top of brood frames in Warsaw-type beehives to collect vibration data over a full apicultural season. The recorded vibration signals were analyzed using both Convolutional Neural Networks (CNNs) and classical machine learning approaches such as the extra trees method. Recursive Feature Elimination with Cross-Validation (RFECV) was performed to isolate the most important frequency bins for lifecycle period identification. The results demonstrate that the critical frequencies for recognizing yearly honey bee activity are concentrated below 1 kHz. The proposed machine learning models achieved a weighted accuracy score of over 95%. These findings have significant implications for future bee monitoring hardware design, indicating that sampling frequencies may be reduced to as low as 2 kHz without significantly compromising model accuracy.
Acoustic metamaterial development is a rapidly expanding field, which has shown great success in many applied scenarios. The development of acoustic metamaterials is enabled by modelling techniques such as the Finite Elements Method (FEM), which allow for the determination of acoustic parameters of structures with different shapes and sizes. However, complicated geometries within narrow regions of such structures require the consideration of thermoviscous phenomena in modelling, which significantly increases the computational load, at times rendering structural optimization infeasible. This study presents a method for determining acoustic sound absorption parameters of an arbitrary-shape acoustic metamaterial cell in a discretized representation space. The proposed method utilizes a reduction in model dimensionality, using a 2D numerical model to represent a 3D structure, which allows for reduced computational complexity while retaining model accuracy. The method was validated with a simple geometry and compared to methods commonly used in the field including equivalent fluid modelling and the Transfer Matrix Method. The method was validated using impedance tube measurements of generated arbitrary geometry metamaterial cells. A numerical mesh sensitivity study was conducted utilizing 20 generated numerical models. Recommendations regarding the mesh density within a 2D thermoviscous acoustics domain were presented, with acceptable modelling error levels (under 0.5%) achieved by models with strongly reduced mesh density, with a maximum model complexity reduction of 72.4%.
This paper is concerned with the construction of a demonstration kit to illustrate the applications of acoustic resonance-based suppressors in the context of narrowband industrial noise suppression. The kit consists of two main components – a circular waveguide and interchangeable silencer elements inserted into the waveguide channel. The functionality of the attenuators is demonstrated using an application that compares the acoustic spectrum of the signal recorded at the outlet of the waveguide without the attenuators installed and with the attenuators in place. Construction steps of the demonstration kit are presented as well as the process of optimising the geometry of the resonator dampers and the difficulties of using 3D printing in the manufacturing processes of acoustic metamaterials are presented. The possibilities of using the demonstration set in the context of teaching, science communication and tackling acoustic noise pollution were also discussed. The broad possibilities for further development of the design, particularly the potential for use in prototyping new geometries of acoustic metamaterials were also addressed.