Since the inception of the transcranial magnetic stimulation (TMS) technique, it has become imperative to numerically compute the distribution of the electric field induced in the brain. Various models of the coil-brain system have been proposed for this purpose. These models yield a set of formulations and boundary conditions that can be employed to calculate the induced electric field. However, the literature on TMS simulation presents several of these formulations, leading to potential confusion regarding the interpretation and contribution of each source of electric field. The present study undertakes an extensive compilation of widely utilized formulations, boundary value problems and numerical solutions employed in TMS fields simulations, analyzing the advantages and disadvantages associated with each used formulation and numerical method. Additionally, it explores the implementation strategies employed for their numerical computation. Furthermore, this work provides numerical expressions that can be utilized for the numerical computation of TMS fields using the finite difference and finite element methods. Notably, some of these expressions are deduced within the present study. Finally, an overview of some of the most significant results obtained from numerical computation of TMS fields is presented. The aim of this work is to serve as a guide for future research endeavors concerning the numerical simulation of TMS.
7 September 2022 in Journal of Magnetism and Magnetic Materials
In this work, steel square samples were subjected to varying degrees of compression, resulting in a distribution of simultaneous compressive and tensile stresses within the samples. The tangential component of the surface magnetic flux density was mapped along both the direction of compression and perpendicular to it, using a magnetic sensor, for each level of compression. The results show that the maps of the relative difference of magnetic flux density for different levels of applied stress, with respect to the flux density at zero stress, exhibited a diagonal stripes pattern. This pattern was discovered thanks to the particular surface stress distribution in square samples. The formation of these patterns could be attributed to the re-orientation of magnetic domains due to stress and the magneto-elastic effect, which was confirmed by the change in orientation of the magnetic flux density vectors obtained from the measurement of two of their components. Additionally, the maps showed an increase in contrast between high and low values with an increase in applied stress. Finally, the maps of the module of the gradient of magnetic flux density displayed a distinct diagonal chessboard-like pattern, and the contrast between low and high values increased with an increase in applied stress.
This paper presents a prototype of an automobile driver assistance system based on YOLOv3. The system detects car types, traffic signs, and traffic lights in real-time and warns the driver accordingly. In the learning phase of the YOLO algorithm, the standard weights are learned first, followed by transfer learning to the objects of interest. The retraining phase uses 2,800 images obtained from the Internet of three countries of the real-life, and the testing phase uses real-time videos of Mexico City roads. In the validation phase, the proposed system achieves 95%, 37%, and 40% performance on the compiled dataset for the detection of road elements. The results obtained are comparable and in some cases better than those reported in previous works. Using a Raspberry Pi 4, the prototype was tested in real-life, generating visual and audible warnings for the driver, with an object recognition rate of 0.4 fps. A mean average precision (mAP) of 53% was reached by the proposed system. The experiments showed that the prototype achieved a poor recognition rate and required high computational processing for object recognition. However, YOLO is a model that can have good performance on low-resource hardware.
This work describes the design and implementation of a Zero-Length Column system to measure: diffusion coefficients, adsorption isotherm parameters of pure components and mixtures. In addition, a graphical user interface (GUI) was developed in LabVIEW for the semi-automatic operation of the system. The system is novel because it integrates all the aforementioned functionalities without using mass spectrometry. Two adsorbents, zeolite 5A and Basolite® C300 (Copper benzene-1,3,5-tricarboxylate) and two adsorbates methane and ethane were used to perform the validation of adsorption and diffusion experiments. The Henry constants and diffusion coefficients obtained reproduce those previously reported. The combination of the experimental setup and the GUI significantly reduce the amount of sample and measurement time needed in the characterization of the molecular sieves by conventional volumetric and gravimetric systems. The proposed system is relatively inexpensive, robust, easy to build, and capable of reproducing the results of other techniques.