In the recent era, fifth-generation technology (5G) has not been fully implemented in the realm of wireless communication. To have excellent accessible bandwidth feasibility, and in order to achieve the aims of 5G standards, such as higher data rates and ultrahigh-definition video streaming, the millimeter wave (mmWave) band must be employed. Services with minimal latency and many other features are feasible only in the mmWave spectrum. To avoid numerous communication complexities such as high connection losses, short wavelength, and restricted bandwidth, as well as path-loss challenges in the mmWave range, an antenna with wide bandwidth, high gain, narrow steerable beam, high isolation, low side-lobe levels, and multiband features is required to alleviate these difficulties and meet 5G communication standards. To overcome these challenges, specific strategies and techniques should be employed in the traditional antenna designing procedure to excellently improve the performance of the antenna in terms of bandwidth, gain, and efficiency and to reduce the mutual coupling effect between the closely colocated antenna elements in MIMOs and arrays. The researchers reported on a variety of bandwidth and gain improvement approaches. To gain broader coverage, traditional antenna design techniques must be modified. In this study, the latest state-of-the-art work is reviewed, such as the role of the metamaterials (MMTs), parasitic patches, hybrid feeding, EBG structure, impact of the slots with different geometrical shapes in the radiator to achieve the goal of wide bandwidth, boosted gain, reduced side-lobes level, as well as stable radiation properties. Mutual coupling reduction techniques are also briefly reported. The role of reconfigurability is focused on in this study, and at the end, the future challenges in the field of antenna design and possible remedies to such issues are reviewed.

This paper presents a metamaterial sensor using a double slit complementary square ring resonator (DS-CSRR) that has been utilized for the measurement of dielectric materials, especially coal powder. The design is optimized for best performance of deep notch depth in transmission coefficient (Magnitude of S${}_{21}$). Sensitivity analysis of transmission coefficient with respect to structure dimensions has been carried out. Metamaterial properties of double negative permitivity and permeability were extracted from the S–parameters of this sensor. The optimized structure is fabricated using low cost FR-4 PCB board. Measured result shows resonance frequency of 4.75 GHz with a deep notch up to −41 dB. Simulated and measured results show good agreement in desired frequency band. For material characterization, first, two known materials are characterized using this metamaterial sensor. Their respective resonances and dielectric constants are known, so the transcendental equation of the sensor is formulated. Afterwards, the proposed sensor is used for dielectric measurement of two types of coal powder, i.e., Anthracite and Bituminous. The measured value of dielectric constant of Anthracite coal is 3.5 and of Bituminous coal is 2.52. This is a simple and effective nondestructive measurement technique for material testing applications.

This paper highlights recent developments and challenges on beam steering characteristics of reconfigurable transmitarray antennas. It introduces the operating principle of beam forming/beam steering high gain transmitarray antennas to enable the user to opt for economical and high performance solutions. A transmitarray antenna typically consists of a source antenna and a phase transformation structure. The incident waves generated from the source antenna is tilted using the phase transformation structure in a desired direction to steer the beam. Moreover, the phase transformation structure alters the incident wavefront to a plane wavefront using phase change characteristics. In order to steer a beam to a specific desired angle, it can be divided into two methods. There is a method of applying a transmitarray with a variable transmission phase change or a method of changing the shape of the wavefront of the source antenna. This type of beam forming/beam steering high gain antenna has been mainly studied from the point of view of high efficiency, low profile, and low cost. Several solutions of transmitarray unit cells have been presented in the literature, using PIN diodes, varactors, MEMS switches, and microfluids enable electronics to realize reconfigurable characteristics of transmitarray antennas. This paper analyzes the characteristics of various beam steering high gain reconfigurable transmitarrays (RTA) and highlights the future opportunities and challenges of the structure design for transmitarray antennas. This paper also highlights the challenges and gaps in terahertz and optical frequencies related to future work due to the structure complexity and lack of components’ availability. Moreover, the challenges and limitations related to multi-bit structures and dual-band requirements are presented.

In this article, a tunable RF sensor is presented for the measurement of dielectric materials (liquids and solids) based on a metamaterial resonator. The proposed novel configuration sensor has a microstrip line-loaded metamaterial resonator with tunable characteristics by utilizing a single varactor diode in the series of the resonator. CST Microwave studio is employed for 3D simulations of the tunable sensor, and the desired performance is attained by optimizing various structural parameters to enhance the transmission coefficient ($S_{21}$ magnitude) notch depth performance. The proposed RF sensor can be tuned in L and S-bands using the varactor diode biasing voltage range of 0–20 V. To validate the performance of the sensor, the proposed design has been simulated, fabricated, and tested for the dielectric characterization of different solid and liquid materials. Material testing is performed in the bandwidth of 1354 MHz by incorporating a single metamaterial resonator-based sensor. Agilent’s Network Analyzer is used for measuring the S-parameters of the proposed sensor topology under loaded and unloaded conditions. Simulated and measured S-parameter results correspond substantially in the 1.79 to 3.15 GHz frequency band during the testing of the fabricated sensor. This novel tunable resonator design has various applications in modulators, phase shifters, and filters as well as in biosensors for liquid materials.

This paper proposes a hexagonal meander-shaped wideband electronically reconfigurable transmitarray (HMRTA) at Ku band for satellite communications and radar applications. The proposed transmitarray offers high gain, low profile, and wideband characteristics with beam-scanning and beam-forming features. The cascaded structure is a low-profile and compact transmitarray. The transmitter (T_x) layer has an angular hexagonal patch with a meandered shape and resonating parasitic patches to enhance the bandwidth. The receiver (R_x) layer comprises a two-part hexagonal receiver patch and a dual ring impedance-matching receiver layer. The current reversal phenomena have executed the 180° phase shift by integrating two diodes in opposite directions. The measured results of a unit cell achieve a minimum insertion loss of 0.86 dB and 0.92 dB for state I and state II. The maximum insertion loss is 2.58 dB from 14.12 GHz to 18.02 GHz and is about 24.83% at 16.5 GHz. The full-wave simulations of a 20 × 20 space-fed reconfigurable transmitarray were performed. Good radiation patterns at all scanning angles of two principal planes are achieved, and the cross-polarization level remains less than −20 dB. The simulated 3 dB gain fluctuation bandwidth of the array is 15.85~18.35 GHz, and the wideband characteristics are verified. The simulation results show that the array can perform beam scanning ±60° in the elevation (y-z) plane and obtain the beam-scanning characteristics for ±60° in the Azimuth (x-z) plane.

Terahertz (THz) technology has drawn considerable attention for its applications in non-destructive biomolecule detection, but it faces challenges in biosensing at trace levels and low concentrations. Among biomolecules, phenylalanine is an important amino acid used in pharmaceuticals, making its detection important for the medical and pharmaceutical applications. For phenylalanine detection, we introduce a compact design featuring two squares, each with a cross etched at its center. This new sensor features a single metal layer that exhibits Fano resonance, generated by an asymmetric gap between two square patches. The proposed sensor exhibits a simulated high-Q resonance (Q=115) at 1.54 THz, with a high sensitivity of 430 GHz/RIU, a figure of merit (FoM) of 32, and a high transmittance amplitude of 82%. The structure is optimized for fabrication on a quartz substrate. The performance of this compact metasurface sensor (5x5x0.1 mm³) is verified by terahertz time-domain spectroscopy (THz-TDS). Measurements show a Q-factor of 96, a phenylalanine detection limit of 5 mg/mL, and minimal sample usage of 2 μL per test. This design benefits from high sensitivity, an ultra-high Q-factor, and compactness, representing a promising approach for high-Q, trace-level detection in biosensing applications.