Qiangui Zhang

Dr. Qiangui Zhang

Southwest Petroleum University

Research Focus & Metrics

Academic Career Length

12Years (2015-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 September 2015 in Engineering Geology
Verified
Journal Article
Closed access
Qiangui ZhangQiangui Zhang
Qiangui Zhang
GYGuangzhi Yin
Guangzhi Yin
ZWZuoan Wei
Zuoan Wei
XFXiangyu Fan
Xiangyu Fan
WWWensong Wang
Wensong Wang
WNWen Nie
Wen Nie

1 June 2015 in Petroleum
Verified
Journal Article
Open access
Qiangui ZhangQiangui Zhang
Qiangui Zhang
WJWenyu Jia
Wenyu Jia
XFXiangyu Fan
Xiangyu Fan
YLYongchang Liang
Yongchang Liang
YYYang Yang
Yang Yang
Wellbore instability in hard brittle shale is a critical topic related to the effective exploitation of shale gas resources. This review first introduces the physical–chemical coupling theories applied in shale wellbore stability research, including total water absorption method, equivalent pore pressure method, elasticity incremental method of total water potential and non-equilibrium thermodynamic method. Second, the influences of water activity, membrane efficiency, clay content and drilling fluid on shale wellbore instability are summarized. Results demonstrate that shale and drilling fluid interactions can be the critical factors affecting shale wellbore stability. The effects of thermodynamics and electrochemistry may also be considered in the future, especially the microscopic reaction of shale and drilling fluid interactions. An example of this reaction is the chemical reaction between shale components and drilling fluid

21 May 2018 in Materials
Verified
Journal Article
Open access
PDF file
XFXiangyu Fan
Xiangyu Fan
ZPZhao Pengfei
Zhao Pengfei
Qiangui ZhangQiangui Zhang
Qiangui Zhang
TZTing Zhang
Ting Zhang
KZKui Zhu
Kui Zhu
CZChenghua Zhou
Chenghua Zhou
Well leakage of fractured strata is a tricky problem while drilling. This unwieldy problem is usually caused by the poor formation of the cementing degree, the staggered-mesh of the fracture, and the low bearing capacity of the formation, which can also lead to a narrow and even unsafe window of drilling fluid density. For fractured strata, the normal plugging material has the disadvantages of unsuitable size and low strength, resulting in unsuccessful first time plugging and an increase in cost. Therefore, we developed a polymer plugging gel for the fractured strata, named XNGJ-3. XNGJ-3 is mainly made of an acrylamide monomer and is accompanied by the reactive monomers of carboxyl and hydroxyl as ingredients. XNGJ-3 has a low viscosity before gelling. At 80 °C it becomes gelled, and the gelling time was controlled within the required time of the practical application. These conditions are beneficial for making the plugging material enter the crossing fracture smoothly and occlude the fracture. XNGJ-3 also has a good deformability and can avoid being damaged during the process of fracture closure. The well leakage simulated experiment revealed that the bearing capacity of this material can reach 21 MPa and the inverse bearing capacity can reach 20 MPa. These strengths are more than twice that of common polymer plugging gels. Finally, three leaked wells in the fractured strata of the Sichuan Basin were used to verify the plugging effect of XNGJ-3. Compared with other common plugging materials, XNGJ-3 has the advantages of having a higher success rate of first time plugging, a lower economic cost, a shorter work time, and so forth, which indicate that this plugging material has a good engineering application value in dealing with well leakage of fractured strata.

1 May 2020 in Journal of Natural Gas Science and Engineering
Verified
Journal Article
Closed access
XFXiangyu Fan
Xiangyu Fan
MZMingming Zhang
Mingming Zhang
Qiangui ZhangQiangui Zhang
Qiangui Zhang
PZPengfei Zhao
Pengfei Zhao
BYBowei Yao
Bowei Yao
DLDa Lv
Da Lv

19 January 2022 in Applied Sciences
Verified
Journal Article
Open access
PDF file
Qiangui ZhangQiangui Zhang
Qiangui Zhang
LWLizhi Wang
Lizhi Wang
PZPengfei Zhao
Pengfei Zhao
Xiangyu FanXiangyu Fan
Xiangyu Fan
FZFeitao Zeng
Feitao Zeng
YFYang Feng
Yang Feng
It is well known that the effect of shale hydration causes wellbore instability due to water phase invasion of drilling fluid to lamellar shale rich formations. This is because of that the mechanical properties (compressive strength, elastic modulus, etc.) of lamellar shale surrounding the borehole, which is rich in clay minerals, will decrease significantly after hydration. In this study, using the lamellar shale in the continental stratum of the southern Ordos Basin, the mechanical properties of lamellar shale were studied by compression tests considering the effect of lamellar structure and hydration from a macroscopic point of view. In addition, the mechanical mechanism was discussed combined with the CT scanning tests results from a microscopic point of view. The results demonstrate the following points. Lamellar shale has stronger anisotropy than bedding shale, the compressive strength (deviatoric stress) and elastic modulus of lamellar shale are both lower than those of bedding shale, and it is more prone to tension fracture. With the increase in the angle (β) between the lamina and the axial direction from 0° to 90°, the compressive strength of lamellar shale decreases when β < 30° and then increases, the elastic modulus of lamellar shale decreases greatly when β < 30° and then tends to flatten. With the increase in hydration time, the compressive strength and elastic modulus of lamellar shale both gradually decrease, and the rates of their decrements reduce. The mechanical properties of lamellar shale are more affected by hydration than those of bedding shale. The hydration of lamellar shale leads to the formation of new fractures and the expansion of existing fractures in the junction area between the laminae and rock matrix, resulting in easy tension fracture along the laminae of shale.

31 October 2022 in Acta Geotechnica
Verified
Journal Article
Closed access
PDF file
Qiangui ZhangQiangui Zhang
Qiangui Zhang
JRJiawei Ran
Jiawei Ran
Xiangyu FanXiangyu Fan
Xiangyu Fan
BYBozhong Yang
Bozhong Yang
PZPengfei Zhao
Pengfei Zhao
LHLiang He
Liang He