Qiuxiang Huang

Dr. Qiuxiang Huang

University of New South Wales, Canberra, Australian Capital Territory, Australia
orcid

Research Focus & Metrics

Academic Career Length

16Years (2011-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 September 2022 in Physics of Fluids
Verified
Journal Article
Closed access
PDF file
QHQiuxiang Huang
Qiuxiang Huang
ZLZhengliang Liu
Zhengliang Liu
LWLi Wang
Li Wang
SRSridhar Ravi
Sridhar Ravi
JYJohn Young
John Young
Fang-Bao TianFang-Bao Tian
Fang-Bao Tian
This paper presents a study on streamline penetration, velocity error, and consequences of a fluid–structure interaction (FSI) solver based on the feedback immersed boundary method (IBM). In the FSI solver, the fluid dynamics is solved by the lattice Boltzmann method; the solid structure deformation is solved by the finite difference method and the finite element method for two- and three-dimensional cases, respectively; and the feedback IBM is used to realize the interaction between the fluid and the structure. The IBM is implemented in non-iterative and iterative ways. For the non-iterative version, two types of integration are discussed: without and with velocity prediction step. Five benchmark cases are simulated to study the performance of the three implementations: a uniform flow over a cylinder, flow-induced vibration of a flexible plate attached behind a stationary cylinder in a channel, flow through a two-dimensional asymmetric stenosis, a one-sided collapsible channel, and a three-dimensional collapsible tube. Results show that both the IBM with prediction step, the iterative IBM, and one iteration IBM with proper feedback coefficients can suppress the spurious flow penetration on the solid wall. While the velocity error does not significantly affect the force production and structure deformation for external flows, reducing it significantly improves the prediction of the force distribution and structure deformation for internal flows. In addition, the iterative IBM with smaller feedback coefficient has better numerical stability. This work will provide an important guideline for the correct use of the feedback IBMs.

7 September 2021 in Journal of Fluid Mechanics
Verified
Journal Article
Closed access
PDF file
QHQiuxiang Huang
Qiuxiang Huang
Fang-Bao TianFang-Bao Tian
Fang-Bao Tian
JYJohn Young
John Young
JLJoseph Lai
Joseph Lai
The nonlinear dynamics of a two-sided collapsible channel flow is investigated by using an immersed boundary-lattice Boltzmann method. The stability of the hydrodynamic flow and collapsible channel walls is examined over a wide range of Reynolds numbers $Re$ , structure-to-fluid mass ratios $M$ and external pressures $P_e$ . Based on extensive simulations, we first characterise the chaotic behaviours of the collapsible channel flow and explore possible routes to chaos. We then explore the physical mechanisms responsible for the onset of self-excited oscillations. Nonlinear and rich dynamic behaviours of the collapsible system are discovered. Specifically, the system experiences a supercritical Hopf bifurcation leading to a period-1 limit cycle oscillation. The existence of chaotic behaviours of the collapsible channel walls is confirmed by a positive dominant Lyapunov exponent and a chaotic attractor in the velocity-displacement phase portrait of the mid-point of the collapsible channel wall. Chaos in the system can be reached via period-doubling and quasi-periodic bifurcations. It is also found that symmetry breaking is not a prerequisite for the onset of self-excited oscillations. However, symmetry breaking induced by mass ratio and external pressure may lead to a chaotic state. Unbalanced transmural pressure, wall inertia and shear layer instabilities in the vorticity waves contribute to the onset of self-excited oscillations of the collapsible system. The period-doubling, quasi-periodic and chaotic oscillations are closely associated with vortex pairing and merging of adjacent vortices, and interactions between the vortices on the upper and lower walls downstream of the throat.

1 March 2024 in Physics of Fluids
Verified
Journal Article
Open access
PDF file
LWLi Wang
Li Wang
ZLZhengliang Liu
Zhengliang Liu
BJBruce Ruishu Jin
Bruce Ruishu Jin
QHQiuxiang Huang
Qiuxiang Huang
JYJohn Young
John Young
Fang-Bao TianFang-Bao Tian
Fang-Bao Tian
This work presents the wall-modeled large eddy simulation (WMLES) in the immersed boundary-lattice Boltzmann method (IB-LBM). Here, the wall model with both diffusive- and sharp-interface immersed boundary methods (IBMs) is incorporated into the IB-LBM to handle the turbulent boundary layer in high Reynolds number turbulent flows. To maintain the numerical stability, two collision models, i.e., multiple-relaxation-time (MRT) and recursive regularized (RR), are implemented. The performance of these models in the WMLES is examined and compared in the simulation of internal and external flows by considering four benchmarks, i.e., turbulent flow in a channel, flow around a hull of submarine, flow around an Ahmed car model, and flow around a circular cylinder. It is found that a diffusive-interface IBM with wall model is capable to achieve excellent results for the simulation of external flows around bluff objects but fails in the simulation of internal flows of underestimating the wall shear stress due to its extra dissipation. The sharp-interface IBM with the wall model predicts the internal flow very well but fails in some simulations of external flow around bluff bodies due to the failure in the separation flow modeling. It is also found that the MRT-LBM is less dissipative than the RR-LBM, but it generates spurious nonphysical noise in the turbulent flows and tends to be unstable at high Reynolds numbers. Therefore, the diffusive-interface IBM with the wall model is more suitable for the external turbulent flow modeling, while its sharp-interface counterpart is more suitable for the internal turbulent flow modeling. The RR-LBM outperforms the MRT-LBM for the better stability and less nonphysical noise.

6 November 2023 in Journal of Fluid Mechanics
Verified
Journal Article
Closed access
PDF file
QHQiuxiang Huang
Qiuxiang Huang
SBShantanu S. Bhat
Shantanu S. Bhat
EYEng Chow Yeo
Eng Chow Yeo
JYJohn Young
John Young
JLJoseph Lai
Joseph Lai
SRSridhar Ravi
Sridhar Ravi
The power exchange between fluid and structure plays a significant role in the force production and flight efficiency of flapping wings in insects and artificial flyers. This work numerically investigates the performance of flapping wings by using a high-fidelity fluid–structure interaction solver. Simulations are conducted by varying the hinge flexibility (measured by the Cauchy number, $Ch$ , i.e. the ratio between aerodynamic and torsional elastic forces) and the wing shape (quantified by the radius of the first moment of area, $\bar {r}_1$ ). Results show that the lift production is optimal at $0.05 < Ch \leq 0.2$ and larger $\bar {r}_1$ where the minimum angle of attack is around $45^\circ$ at midstroke. The power economy is maximised for wings with lower $\bar {r}_1$ near $Ch=0.2$ . Power analysis indicates that the optimal performance measured by the power economy is obtained for those cases where two important power synchronisations occur: anti-synchronisation of the pitching elastic power and the pitching aerodynamic and inertial powers and nearly in-phase synchronisation of the flapping aerodynamic power and the total input power of the system. While analysis of the kinematics for the different wing shapes and hinge stiffnesses reveals that the optimal performance occurs when the timing of pitch and stroke reversals are matched, thus supporting the effective transfer of input power from flapping to passive pitching and into the fluid. These results suggest that careful optimisation between wing shapes and hinge properties can allow insects and robots to exploit the passive dynamics to improve flight performance.

1 February 2023 in Physics of Fluids
Verified
Journal Article
Closed access
PDF file
ZLZhengliang Liu
Zhengliang Liu
QHQiuxiang Huang
Qiuxiang Huang
ZLZongjun Li
Zongjun Li
YLYe Li
Ye Li
Xingya FengXingya Feng
Xingya Feng
The impacts of partial confinement on the power extraction performance of a flapping foil generator at a Reynolds number of 1100 are numerically studied using an immersed boundary–lattice Boltzmann method. Four confinement levels are implemented with two thin plates of finite size symmetrically placed at the distance of 1.5, 2, 3, and 4 foil chord length from the neutral position of the flapping foil. Parametric studies on plate lengths varying from 10 to 50 foil chord lengths at the four confinement levels are conducted. The results show that the power-extraction efficiency increases nearly monotonically with the upstream plate lengths while the impact of the downstream plate lengths is much less significant, indicating that upstream confinement is the dominant factor influencing the power-extraction performance. Contrary to the performance improvement observed in studies on the effect of infinite walls, the efficiency decreases dramatically with the decrease in the distance from the plates to the foil. The reasons for the dramatically decreased performance due to confinement effects are found. First, the interactions between the boundary layer of the plates and leading edge vortices formed on the foil reduce the size of the low-pressure region on the suction surface of the foil, leading to reductions in lift forces and consequently to major reductions in the extracted power. In addition, large mass flow deficits between the finite plates are observed when the distance between the two plates is small, indicating substantial reductions in potential power that can be extracted from the inflow.

1 September 2023 in Physics of Fluids
Verified
Journal Article
Open access
PDF file
JMJingtao Ma
Jingtao Ma
QHQiuxiang Huang
Qiuxiang Huang
YZYi Zhu
Yi Zhu
Yuanqing XuYuanqing Xu
Yuanqing Xu
Fang-Bao TianFang-Bao Tian
Fang-Bao Tian
This paper numerically investigates the impact of fluid rheology on the behaviors of a spherical capsule through a microchannel constriction. Different flow scenarios are considered: a Newtonian capsule in a viscoelastic matrix, a Newtonian capsule in a Newtonian matrix, and a viscoelastic capsule in a Newtonian matrix. The results demonstrate that the capsule's lengths undergo oscillations during the passage through the constriction, with three stages of evolution. When approaching the constriction, the capsule respectively experiences increase and decrease in its length and height. While within or exiting the constriction, the length of the capsule continuously decreases, and the height generally increases. As the capsule moves away from the constriction, the capsule relaxes to different profiles in different flows. Detailed analysis on the effects of the fluid viscoelasticity on the capsule's lengths in different stages is provided. In addition, the behaviors of a red blood cell passing through a microchannel constriction are also examined. This study sheds light on the complex behaviors of a spherical capsule and red blood cell in microchannel constriction, emphasizing the significant influence of fluid rheology on their deformation and shape changes.