The closed architecture and stand-alone operation model of traditional industrial control systems limit their ability to leverage ubiquitous infrastructure resources for more flexible and intelligent development. This restriction hinders their ability to rapidly, economically, and sustainably respond to mass customization demands. Existing proposals for open and networked architectures have failed to break the vicious cycle of closed architectures and stand-alone operation models because they do not address the core issue: the tight coupling among the control, infrastructure, and actuator domains. This paper proposes a reconfigurable architecture that decouples these domains, structuring the control system across three planes: control, infrastructure, and actuator. The computer numerical control (CNC) system serves as a primary example to illustrate this reconfigurable architecture. After reviewing open and networked architectures and discussing the characteristics of this reconfigurable architecture, this paper identifies three key challenges: deterministic control functionality, the decoupling of control modules from infrastructures, and the management of control modules, infrastructures, and actuators. Each challenge is examined in detail, and potential solutions are proposed based on emerging technologies.
The comprehensive utilization of offshore renewable energies is an effective way to solve the intermittency and variability of power supply. This paper aims to present a hybrid floating system (HFS) based on a modular buoyancy-distributed floating foundation (BDFF) that can be equipped with a horizontal-axis wind turbine, solar panels, and wave energy converters (WEC). A simplified test model with a Froude scale ratio of 1/10 is employed to perform the experiments in a deep-water basin to validate the numerical results computed from the code program ANSYS AQWA based on the potential flow theory. The Response Amplitude Operators (RAOs) under regular waves are compared to evaluate the hydrodynamic performance. There is a good agreement in the surge, pitch, and heave RAOs for experiments and the numerical simulation, with a maximum of 6.45 degrees per meter for the pitch motion. Furthermore, the mooring tensions in the time domain are analyzed under different wave conditions.The tension RAOs from simulations are slightly higher than those from measurements with a maximum value at the period of 3.416 s. The mooring line on the windward side has a more considerable mooring tension that is far less than the allowable tensile strength, especially under the wave height of 2 m and the wave period of 2.873 s. The influence of loaded weight representing solar panels is weak, and the impact of winds is acceptable, as the platform deviates 1.3 degrees from the equilibrium state under the test wind speed. Eventually, the effect of irregular waves on the HFS is presented with the critical parameters of mooring tension and pitch motion. The results show that the HFS has a good motion performance.
Floating foundations play a vital role in exploring offshore energy. After analyzing various floating foundation concepts, this paper presents a novel buoyancy-distributed floating foundation (BDFF) inspired by the decentralized concept. The calculations of a floating system based on the BDFF design were performed for a series of wave conditions. The potential theory and the boundary element method (BEM) were used in the numerical progress. A broader view was focused on the impacts of wave frequency and wave directions on the system. The proposed floating system was further validated through wave tests in a wave tank, showing that the potential theory can satisfactorily predict the RAOs in regular waves. Moreover, numerical results and experimental results were compared with a conventional SPAR. Finally, the coupling relationship between six degrees of freedom was described.
The closed architecture of modern control systems impedes them from further development in the environment of the industrial IoT. The open control system is proposed to tackle this issue. Numerous open control prototypes have been proposed, but they do not reach high openness. According to the definition and criteria of open control systems, this paper suggests that the independence between control tasks and the independence between control tasks and infrastructures are the keys to the open control system under the industrial IoT. Through the control domain’s formal description and control task virtualization to deal with the keys, this paper proposes a new method to implement open control systems under the industrial IoT. Specifically, given the hybrid characteristic of the control domain, a hierarchical semantic formal based on an extended finite state machine and a dependency network model with the time property is designed to describe the control domain. Considering the infrastructure’s heterogeneity in the industrial IoT, a hybrid virtualization approach based on containers and WebAssembly is designed to virtualize control tasks. The proposed open control system implementation method is illustrated by constructing an open computer numerical control demonstration and compared to current open control prototypes.