Electrostatic precipitators (ESPs) are widely applied to reduce particle concentrations. However, the performance of ESPs is impaired in the nanosized diameter range due to the difficulty in electrically charging these particles. The present work evaluated the inclusion of a wire screen, perpendicular to the airflow, as an additional collecting electrode of a single-stage wire-plate ESP containing two collecting plates and a single discharge wire. ESP performance was evaluated in terms of voltage, air velocity and electrode positioning in relation to the beginning of the collecting plate (inlet spacings of 1.5, 10 and 23 cm). When compared to theoretical prediction, the penetration results presented a decay for larger particles not predicted by the diffusion battery model. It was observed that the inclusion of the wire screen increased the removal of ultrafine particles and that the overall collection efficiencies increased up to 70% in the operating conditions evaluated. Moreover, the central positioning of the electrodes (inlet spacing of 10 cm) achieved the highest collection efficiencies at high voltages, but the final positioning (inlet spacing of 23 cm) presented a better performance at higher air velocities. Therefore, the wire screen can be an alternative to enhance nanoparticle collection.
The electrostatic precipitator is used to collect particles and reduce their negative impacts on the environment and human health. The present work investigated the influence of the discharge electrode position on nanoparticle electrostatic precipitation. For that, experiments were performed with 1 and 3 discharge electrodes, with the inlet spacings varying from 1.5 to 28.5 cm, referring to the distance between the beginning of the collecting plate and the first discharge electrode. Under most conditions, the inlet spacings for wire positioning in the central region of the electrostatic precipitator achieved the highest collection efficiencies, because the high electric field region was in the center of the equipment duct and provided more uniform particle charging. However, high collection efficiencies were also achieved using the other inlet spacings, especially with lower air velocities and higher electric fields.
1 August 2022 in Theoretical Foundations of Chemical Engineering
The corona onset voltage is an important operating parameter in the electrostatic precipitation of nanoparticulate, however, its experimental determination depends on the accuracy of the measuring equipment. In this study, a theoretical approach based on the Townsend law was developed to determine the onset voltages and to further investigate the characteristics of an electrostatic precipitator (ESP). The experiments to obtain preliminary data were performed at low air velocities (1.03–4.08 cm/s), varying the number of discharge electrodes from 1 to 4. The theoretical onset voltages agreed with the experimental data and increased with the addition of wires. The ESP could achieve 99% particle charging despite the shielding effect observed in some configurations.
O licuri ou ouricuri, Syagrus coronata (Mart) Becc., é uma palmeira cuja distribuição se estende até o litoral brasileiro, cresce bem nas restingas baianas,...
A pirólise é o processo de degradação termoquímica da matéria-prima na ausência total de oxidante, do qual se obtém três produtos, biocarvão, bio-óle...