A solar cell structure with a graded bandgap absorber layer based on InGaN has been proposed to overcome early predicted efficiency. Technological issues such as carrier concentration in the p- and n-type are based on the data available in the literature. The influence of carrier concentration-dependent mobility on the absorber layer has been studied, obtaining considerable improvements in efficiency and photocurrent density. Efficiency over the tandem solar cell theoretical limit has been reached. A current density of 52.95 mA/cm2, with an efficiency of over 85%, is determined for a PiN structure with an InGaN step-graded bandgap absorption layer and 65.44% of power conversion efficiency for the same structure considering piezoelectric polarization of fully-strained layers and interfaces with electron and hole surface recombination velocities of 10−3 cm/s.
31 August 2023 in Semiconductor Science and Technology
In this work, we present the characterization of a UV-sensitive material based on Ga2O3-GaOOH, which was obtained through the thermal oxidation of GaAs wafers in ambient air to achieve Ga2O3. The material’s oxidation mechanism was thoroughly examined using structural, compositional, and optical approaches. X-ray diffraction analysis identified the presence of the β-Ga2O3 crystalline phase, with both in-plane and out-of-plane preferred orientations, along with crystalline inclusions attributed to GaOOH. Furthermore, energy-dispersive spectroscopy confirmed the uniform sublimation of Arsenic, as evidenced by elemental mapping, while Fourier-transform infrared spectroscopy suggested the inclusion of −OH bonds. Surface analysis was carried out by field emission scanning electron microscopy and atomic force microscopy, revealing a grain size of approximately 20 nm. Finally, UV-Vis characterization unveiled a bandgap ranging from 2.9 to 3.9 eV, indicative of the material’s potential for UV-sensitive applications. Overall, the results demonstrate the consistency and reliability of the oxidation process, providing valuable insights into the properties of the Ga2O3-GaOOH material for potential technological advancements.
13 April 2026 in Journal of Vacuum Science & Technology A
A thermal modulation reflectance (TMR) technique is developed and implemented as a contactless, nondestructive optical characterization method for wide-bandgap semiconductor thin films. The physical principles underlying TMR are presented and applied to AlN films grown on Si(111) substrates by plasma-assisted molecular beam epitaxy. The influence of the Al/N growth ratio on the structural, optical, and morphological properties of the films is systematically investigated. The films exhibit a predominantly planar surface morphology with some hillocklike features. TMR measurements enable the determination of the optical bandgap of AlN. A correlation is observed between the bandgap and the Al/N growth ratio. As the samples approach stoichiometric conditions (Al/N = 1), the bandgap energy increases, reaching a maximum value of 6.07 eV.
The journal retracts the article titled “Numerical Study of a Solar Cell to Achieve the Highest InGaN Power Conversion Efficiency for the Whole In-Content Range”