This paper presents parametric and multi-objective optimization (MOO) approach in optimizing daylight and energy consumption by incorporating louvres shading devices depicting three different sky conditions: Birmingham, UK, Jakarta, Indonesia, and Sydney, Australia. The study aims to observe the best louvre design configuration for each given context. The proposed optimization system iterates the logic of the louvre shading device as the dynamic design parameters such as overhang, blade size, spacing, and blade rotation, together with the room orientation to achieve maximum useful daylight illuminance (UDI) and the shading aperture while simultaneously reduces energy consumption. A total of 8509 simulations for three cities have been run and distributed for the purpose of this research. The results of MOO stated an improvement in UDI for Birmingham, Jakarta, and Sydney of 80%, 146.26%, and 79.48%, and cooling energy consumption of 28%, 3.26%, and 2.99% respectively.
This paper aims to find the microclimate aspect within the building form and configuration of five low-cost apartments (henceforth rusun) in Bandung, Indonesia. There are parallel, square, and interspersed plots investigated with specific discussion on the microclimate aspects that gain human perception of outdoor thermal comfort. The microclimate prognostic model, i.e., ENVI-met, was used to determine the mean radiant temperature (Tmrt), which was then used to describe the living quality of outdoor thermal comfort, i.e., PET (physiologically equivalent temperature) in a hot-humid climate context. A parallel plot with building orientation toward north-south was found as the most beneficial building form and configuration. Somehow, the parallel plot toward the west-east orientation did not provide similar performance. Nevertheless, the square plot provided uncomfortable perception as there was an absence of building shade within the wide open space and ground cover to absorb the insolation. The interspersed plot can be considered for the building configuration because it generates more wind among other plots. The building form and configuration of rusun with passive design seems to not be able to achieve outdoor thermal comfort. The highest PET value of Model D with the square plot had PET = 41 °C (hot) while the lowest PET in Model A with the parallel plot (N-S) had PET = 34.2 °C (slightly warm).
The use of parametric and multi-objective optimization (MOO) as a new way of approaching architectural design has been growing in line with current breakthroughs in computational architecture. Wood, on the other hand, is a living and unique building material that provides durability, manufacturing flexibility, and local availability. One of the structure types that provides high structural stability is the hyperboloid. However, the exploration of hyperboloid structures in building design, together with the building daylight objective, is still limitedly reported. This paper presents the application of the parametric approach and multi-objective optimization in optimizing the structure and daylight objectives of a hyperboloid two-story wooden house in Japan, made of 105 mm × 105 mm × 4000 mm Japanese timber. The method involves iterating dynamic parameters such as radius bottom, offset distance, timber members, twisting level, building height, radius-top, and roof slope to optimize the structural objective of minimizing normal force average, displacement, and cost while simultaneously maximizing building volume. Regarding daylight objectives, unit movement and glazing ratio that control the glazing strategies were explored to optimize useful daylight illumination (UDI) in summer and winter. The optimization and exploration yielded 10,098 solutions in structural analysis and 406 solutions in daylight exploration. Based on the data analysis, the proposed methodology has successfully produced the best design solution, discovering the balance between the objective trade-offs. In addition, the most influential parameter that shapes the value of design objectives has been identified. The findings of this research were expected to contribute to and enhance the performance-based design optimization, and support design decision-making process in the early design stage of a wooden house with a hyperboloid structure.
1 September 2021 in IOP Conference Series: Earth and Environmental Science
Along with the enormous impact on computational development in architecture and urban design, the way in approaching the built environment is shifting and intended to look closer to performance and evidence-based design. This development holds promise in handling complex computation to approach desired targeted design goals. However, the implementation of form-finding and design performance optimization still lacks, particularly in Japan’s sub-tropical climate. This paper describes the parametric design and design exploration process’s implementation through the generative algorithm platform to develop a benchmark model to predict building energy and daylight performance and find possible design solutions from the iteration process during the early phase of the design process. The variables incorporated related to the glazing ratio, the length of the overhang, and building orientation. Grasshopper, a parametric-based plugin that works in Rhinoceros, is used to arrange a parametric definition for the overall experiment. The tools used to investigate the environmental analysis and energy consumption are Ladybug and Honeybee, and the exploration process will be conducted using Design Explorer. The context will be situated in Orio district and uses the EPW file of Kitakyushu city, Fukuoka, Japan. The results of this research furthermore can potentially be a comparison for more dynamic factors.
22 August 2024 in JOURNAL OF ARCHITECTURE AND URBANISM
Understanding and identifying the spatial layout patterns of traditional houses is a pivotal feature for preserving and enhancing the cultural heritage of twelve houses which have been an object to be studied. This research investigates a comprehensive study to understand a particular architectural plan in a participative community of design processing on decoding spatial layout patterns through a generative Justified Plan Graph (g-JPG) as a grammatical spatial approach. This research examines the grammar using the rule-based spatial structure of traditional housing in three urban kampung in Indonesia. This method applies three procedures, such as collecting data, extracting jpg grammar, and formulating jpg grammar. Regarding the investigated result, indigenous and non-indigenous dwellers have mostly constructed the spatial configuration axially and created a spatial penetration or intersectional space on movement by generating and distancing social concept long models in their traditional houses. Another finding is that the houses’ spatial layouts are integrated as spacious hall-centred, representing a rule-structure and form-based. It is found that this study can serve as a valuable resource for architects and researchers who are interested in preserving and revitalizing the architectural identity of traditional housing.