Rendy Thamrin

Prof. Dr. Rendy Thamrin

Structural Engineering, Andalas University, Padang, Sumatera Barat, Indonesia
orcid
Professor

Research Focus & Metrics

Academic Career Length

20Years (2007-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
3 March 2022 in Polymers
Verified
Journal Article
Open access
PDF file
Rendy ThamrinRendy Thamrin
Rendy Thamrin
ZZZaidir Zaidir
Zaidir Zaidir
DIDevitasari Iwanda
Devitasari Iwanda
An experimental study was conducted to evaluate the ductility of reinforced concrete beams longitudinally reinforced with hybrid Fiber Reinforced Polymer (FRP)–steel bars. The specimens were fourteen reinforced concrete beams with and without hybrid reinforcement. The test variables were bar positions, ratio of longitudinal reinforcement, and type of FRP. The beams were loaded until failure using a four-point bending test. The performance of the tested beams was observed using the load–deflection curve obtained from the test. Numerical analysis using the fiber element model was carried out to examine the growth of neutral axis due to the effects of the test variables. The neutral axis curves were then used to estimate the neutral axis angles and displacement indices. The test results showed that the reinforcement position did not significantly affect the flexural capacity of beams with a higher ratio of hybrid reinforcement, but was quite significant in beams with a lower ratio of hybrid reinforcement. It was observed from the test that the flexural capacity of beams with hybrid reinforcement was 15–45% higher than that of beams with conventional steel bars, depending on bar positions and the ratio of longitudinal reinforcement. The ductility of beams with hybrid reinforcement was significantly increased compared to that of beams with FRP, but decreased as the hybrid reinforcement ratio (Af/As) increased. This study also showed that the developed numerical model could predict the flexural behavior of beams with hybrid reinforcement with reasonable accuracy. Based on the test results, parametric analysis, and data obtained from the literature, the use of the neutral axis angle and displacement index value to evaluate the ductility of cross-sections with hybrid reinforcement is proposed.

1 January 2017 in Procedia Engineering
Verified
Journal Article
Open access
Rendy ThamrinRendy Thamrin
Rendy Thamrin
RSRicka Puspita Sari
Ricka Puspita Sari

11 February 2023 in Results in Engineering
Verified
Journal Article
Open access
Rendy ThamrinRendy Thamrin
Rendy Thamrin
ZAZaidir
Zaidir
AWAisya Wahyuni
Aisya Wahyuni

5 April 2017 in MATEC Web of Conferences
Verified
Journal Article
Open access
PDF file
Rendy ThamrinRendy Thamrin
Rendy Thamrin
MATEC Web of Conferences, open access proceedings in Materials science, Engineering and Chemistry

16 August 2021 in Polymers
Verified
Journal Article
Open access
PDF file
Rendy ThamrinRendy Thamrin
Rendy Thamrin
ZZZaidir Zaidir
Zaidir Zaidir
SDSilvy Desharma
Silvy Desharma
In this study, experimental work was carried out on reinforced concrete (RC) beams strengthened with carbon fiber reinforced polymers (CFRP) plates. This study aims to examine the effect of the reinforcement ratio on the flexural behavior of these beams and propose a new model for predicting the debonding moment. Six RC beams consisting of three control beams and three beams strengthened with CFRP plates were tested. The beams were simply supported and loaded with four-point bending. The test variable was the tensile reinforcement ratio (1%, 1.5%, and 2.5%). Analytical prediction using the fiber element method was also carried out to obtain the complete theoretical response of the beam due to flexural loads. The test results show that the reinforcement ratio affected the bending performance of RC beams with CFRP plates. Following this, the experimental data from 60 beam test results from published literature and this study were analyzed. From these data, it was found that the ratio of tensile reinforcement, the ratio of modulus of elasticity of concrete, the modulus of elasticity of the plate, and plate thickness all affect the value of debonding moment. A parametric study using fiber elements and the two-dimensional finite element method was also carried out to confirm the effect of these variables on debonding failure. These variables were then used to develop an equation to predict the debonding moment of RC beams strengthened with CFRP plates, using simple statistical analysis. This analysis resulted in a simple model for predicting the debonding moment. Then the model is entered into a computer program, and the complete response of the cross-section due to debonding failure can be obtained.

1 January 2017 in Procedia Engineering
Verified
Journal Article
Open access
Rendy ThamrinRendy Thamrin
Rendy Thamrin
RKRuddy Kurniawan
Ruddy Kurniawan
AMAnnisa Prita Melinda
Annisa Prita Melinda