Reuben Swart

Mr. Reuben Swart

University of Pretoria, Pretoria, Gauteng, South Africa
orcid

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
15 June 2022 in Fermentation
Verified
Journal Article
Open access
PDF file
RSReuben Swart
Reuben Swart
Hendrik Gideon BrinkHendrik Gideon Brink
Hendrik Gideon Brink
WNWillie Nicol
Willie Nicol
The hydrolysis of lignocellulosic biomass opens an array of bioconversion possibilities for producing fuels and chemicals. Microbial fermentation is particularly suited to the conversion of sugar-rich hydrolysates into biochemicals. Rhizopus oryzae ATCC 20344 was employed to produce fumaric acid from glucose, xylose, and a synthetic lignocellulosic hydrolysate (glucose–xylose mixture) in batch and continuous fermentations. A novel immobilised biomass reactor was used to investigate the co-fermentation of xylose and glucose. Ideal medium conditions and a substrate feed strategy were then employed to optimise the production of fumaric acid. The batch fermentation of the synthetic hydrolysate at optimal conditions (urea feed rate 0.625mgL−1h−1 and pH 4) produced a fumaric acid yield of 0.439gg−1. A specific substrate feed rate (0.164gL−1h−1) that negated ethanol production and selected for fumaric acid was determined. Using this feed rate in a continuous fermentation, a fumaric acid yield of 0.735gg−1 was achieved; this was a 67.4% improvement. A metabolic analysis helped to determine a continuous synthetic lignocellulosic hydrolysate feed rate that selected for fumaric acid production while achieving the co-fermentation of glucose and xylose, thus avoiding the undesirable carbon catabolite repression. This work demonstrates the viability of fumaric acid production from lignocellulosic hydrolysate; the process developments discovered will pave the way for an industrially viable process.

12 January 2022 in Catalysts
Verified
Journal Article
Open access
PDF file
RSReuben Swart
Reuben Swart
DRDominic Kibet Ronoh
Dominic Kibet Ronoh
Hendrik Gideon BrinkHendrik Gideon Brink
Hendrik Gideon Brink
WNWillie Nicol
Willie Nicol
Fumaric acid is widely used in the food and beverage, pharmaceutical and polyester resin industries. Rhizopus oryzae is the most successful microorganism at excreting fumaric acid compared to all known natural and genetically modified organisms. It has previously been discovered that careful control of the glucose feed rate can eliminate the by-product formation of ethanol. Two key parameters affecting fumaric acid excretion were identified, namely the medium pH and the urea feed rate. A continuous fermentation with immobilised R. oryzae was utilised to determine the effect of these parameters. It was found that the selectivity for fumaric acid production increased at high glucose consumption rates for a pH of 4, different from the trend for pH 5 and 6, achieving a yield of 0.93 gg−1. This yield is higher than previously reported in the literature. Varying the urea feed rate to 0.255 mgL−1h−1 improved the yield of fumaric acid but experienced a lower glucose uptake rate compared to higher urea feed rates. An optimum region has been found for fumaric acid production at pH 4, a urea feed rate of 0.625 mgL−1h−1 and a glucose feed rate of 0.329 gL−1h−1.

25 February 2022 in Catalysts
Verified
Journal Article
Open access
PDF file
DRDominic Kibet Ronoh
Dominic Kibet Ronoh
RSReuben Swart
Reuben Swart
WNWillie Nicol
Willie Nicol
Hendrik Gideon BrinkHendrik Gideon Brink
Hendrik Gideon Brink
Calcium carbonate has been extensively used as a neutralising agent in acid-forming microbial processes. The effect of increasing calcium carbonate concentrations on Rhizopus delemar has not been previously investigated. In this study, an evaluation of fumaric acid (FA) and malic acid (MA) production was conducted at three CaCO3 concentrations in shake flask cultivations. Increased CaCO3 concentrations resulted in the co-production of FA and MA in the first 55 h of the fermentation (regime 1), and the subsequent depletion of FA thereafter (regime 2). Three factors were highlighted as likely causes of this response: insoluble solids, metal ion concentrations, and pH. Further shake flask cultivations as well as a continuous fermentation with immobilised R. delemar were used to explore the effect of the three factors on regime 1 and 2. Insoluble solids were found to have no effect on the response in either regime 1 or 2. Increasing the aqueous calcium ion concentrations to 10 g L−1 resulted in a three-fold increase in MA titres (regime 1). Moreover, an increase in pH above 7 was associated with a drop in FA concentrations in regime 2. Further tests established that this was due to the hydration of FA to MA, influenced by high pH conditions (7 or higher), nitrogen starvation, and glucose depletion. Anaerobic conditions were also found to significantly improve the hydration process. This study presents the first investigation in which the production of FA followed by in situ hydration of FA to MA with R. delemar has been achieved.

18 October 2022 in Biofuels, Bioproducts and Biorefining
Verified
Journal Article
Open access
Hendrik Gideon BrinkHendrik Gideon Brink
Hendrik Gideon Brink
MGMonique Geyer‐Johnson
Monique Geyer‐Johnson
RSReuben Swart
Reuben Swart
WNWillie Nicol
Willie Nicol
It has been proposed that the microbial bioproduction of chemical precursors could reduce societal overreliance on the petrochemical industry. However, economic implementation remains elusive due to a lack of understanding of the mechanisms involved. The current study evaluated malic acid production using a novel immobilized Aspergillus oryzae fungal bed bioreactor. The experimental procedures involved two different nitrogen sources (urea and (NH4)2SO4), two‐phase growth/production and simultaneous single‐step growth/production runs, the presence and absence of added CO2, the presence and absence of pH control, and the use of glucose and dl‐malate as the carbon sources. The experimental malic acid titers were remarkably poor (between 1.7 and 3.3 g.L−1) in comparison with CaCO3 buffered malic acid titers from literature (concentrations in excess of 100 g.L−1 have been reported reported). In contrast, citric acid was observed to be the main metabolite. The dl‐malate carbon source was consumed with concomitant growth, indicating A. oryzae′s ability to utilize both d and l enantiomers of malic acid. Detailed metabolic flux analyses predicted partial consumption of urea during growth, while (NH4)2SO4 was fully utilized. During the urea runs, significant amounts of glycogen were accumulated in the biomass – which were utilized as substrate during the production run. Nitrogen limitations induced significant lipid production, corresponding to citric acid accumulation in the media; the mechanism for fungal lipid biosynthesis involves citric acid excretion at the expense of malic acid. These results indicate a possible calcareous trigger for malic acid production as opposed to the traditionally accepted nitrogen starvation mechanism – nitrogen starvation resulted in lipid accumulation with corresponding malate loss. © 2022 The Authors. Biofuels, Bioproducts and Biorefining published by Society of Industrial Chemistry and John Wiley & Sons Ltd.

17 July 2026 in Nucleic Acids Research
Verified
Journal Article
Open access
EFEmily M Fulk
Emily M Fulk
RSReuben Swart
Reuben Swart
ANAkira K Nakamura
Akira K Nakamura
LQLaura B Quinto
Laura B Quinto
VNVioleta Sànchez i Nogué
Violeta Sànchez i Nogué
CJChristopher W Johnson
Christopher W Johnson
Genome reduction is widely used to improve microbial bioprocessing hosts by reducing the burden of inessential physiology. Rationally identifying genomic regions that are dispensable or even detrimental to bioprocessing is challenged by our inability to map genome sequence to function across complex regulation and physiology. Thus, there is a need for tools that rapidly generate reduced genome strains with improved performance in process-relevant conditions. Here, we report a Cascade–Cas3-enabled method called TRIM3 that generates large deletions by targeting a randomly integrated transposon, enabling facile generation of a genome-reduced mutant library. Mutants with improved performance were isolated following growth-coupled selection and analyzed by long-read DNA sequencing to identify deletions in their genomes. We deploy this system iteratively in the industrial host Cupriavidus necator H16 on fructose and on formate. After two rounds of TRIM3, we isolate a strain containing a total reduction of 1.4 Mb (18.4% of the genome) that grows 25% faster in a bioreactor on fructose and a strain with a total reduction of 0.5 Mb (7.3% of the genome) that grows 14% faster on formate. This work demonstrates a method for random, iterative, growth-selectable genome reduction that represents a new avenue for large-scale genome modifications and the development of improved bioprocessing hosts.