The production and loss of fine particles of activated carbon (AC) loaded with gold in the adsorption processes is a worldwide problem, mainly due to the behavior of increasing its adsorption capacity with respect to the decrease in particle size, which becomes relevant to determine the thermodynamic and kinetic activity of the gold adsorption and the economic impact of its loss, with the escape towards the later stages of the system of adsorption, desorption, and reactivation (ADR) plants of AC. Through the adsorption of gold in a synthetic medium with sodium cyanide concentration, using different particle sizes, AC weights, and adsorption times, data were generated for analysis by three different isotherm models, resulting in a better tendency for the Freundlich isotherm, from which thermodynamic parameters of ΔG equal to −2.022 kcal/mol, ΔH equal to −16.710 kcal/mol, and ΔS equal to −0.049 kcal/molK were obtained, which shows that it is a spontaneous, exothermic process with a lower degree of disorder. The kinetic analysis was performed with two different models, from which the pseudo-second-order model was used due to a better tendency and displayed a behavior that leaves open the interpretation of the increase in adsorption with respect to the decrease in the AC particle size but demonstrated the importance of recovering these particles in relation to their gold concentration and the economic impact from their poor recovery, which, for this case study, amounted to ~0.3 million dollars per year.
The high efficiency of gold recovery via the industrial metallurgical process is increasingly relevant because gold is present at low concentrations in mineral bodies and is difficult to extract. In the mining–metallurgical industry, gold adsorption on activated carbon (AC) includes stages that compromise the structural integrity of the particle. In particular, carbon is an organic material that tends to wear and break down in recovery systems, causing fine particles losses of up to 41% of the average consumption (40 g/t of AC). Carbon-in-columns (CIC) for gold recovery systems lacks on a measure to prevent losses of particles <0.040 mm. Electrocoagulation (EC) technology is an option to improve AC particles recovery from CIC systems, thus increasing the recovery efficiency of ultra-fine particles of AC without requiring additional chemicals. To find the optimal working parameters of gold recovery by EC, the present study conducts laboratory-scale, batch-type EC experiments on AC particles of different sizes (0.106 and 0.053 mm) using different electrodes (iron and aluminum). The EC process was performed in synthetic aqueous medium with an AC particle concentration of 0.8000 g/L. The experimental design and results were carried on using the Taguchi statistical method. Scanning electron microscopy images of the filtered and recovered elecrocoagulated product revealed partially coated AC and aggregates of various AC particles with gold. The EC process with the aluminum electrode more effectively recovered the 0.106-mm-sized AC particles, with a more uniform coating, than EC with the iron electrode. Small particles tended to aggregate into larger particles with aluminum hydroxide species, enabling extremely fine AC particle recovery by EC. When used with the aluminum and iron electrodes, the gold–AC recoveries of the EC process exceeded 96% and 88%, respectively.