Ronaldo P. Parreño  Jr

Dr. Ronaldo P. Parreño Jr

De La Salle University
+1
orcid
Scientist I

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
7 April 2020 in RSC Advances
Verified
Journal Article
Open access
PDF file
Ronaldo P. Parreño  JrRonaldo P. Parreño Jr
Ronaldo P. Parreño Jr
YLYing-Ling Liu
Ying-Ling Liu
ABArnel Beltran
Arnel Beltran
MCMaricar B. Carandang
Maricar B. Carandang
Electrospun nanofibers of polybenzoxazines (PBzs) were fabricated using an electrospinning process and crosslinked by a sequential thermal treatment. Functionalization by the direct sulfonation process followed after the post-electrospinning modification treatment. The first stage of experiment determined the effects of varying the concentration of sulfuric acid as the sulfonating agent in the sulfonation reaction under ordinary conditions. The second stage examined the mechanism and kinetics of the sulfonation reaction using only concentrated H2SO4 at different reaction time periods of 3 h, 6 h, and 24 h. The mechanism of the sulfonation reaction with PBz nanofibers was proposed with only one sulfonic acid (–SO3H) group attached to each of the repeating units since only first type substitution in the aromatic structure occurs under this condition. The kinetics of the reaction exhibited a logarithmic correlation where the rate of change in the ion exchange capacity (IEC) with the reaction time increased rapidly and then reached a plateau at the reaction time between 18 h and 24 h. Effective sulfonation was confirmed by electron spectroscopy with a characteristic peak associated with the C–S bond owing to the sulfonate group introduced onto the surface of the nanofibers. ATR-FTIR spectroscopy also confirmed these results for varying reaction times. The SEM images showed that sulfonation has no drastic effects on the morphology and microstructure of the nanofibers but a rougher surface was evident due to the wetted fibers with sulfonate groups attached to the surface. EDX spectra exhibited sulfur peaks where the concentration of sulfonate groups present in the nanofibers is directly proportional to the reaction time. From surface wettability studies, it was found that the nanofibers retained the hydrophobicity after sulfonation but the inherent surface property of PBz nanofibers was observed by changing the pH level of water to basic, which switches its surface properties to hydrophilic. The thermal stability of the sulfonated nanofibers showed almost the same behavior compared to non-sulfonated nanofibers except for the 24 h sulfonation case, which has slightly lower onset temperature of degradation.

11 January 2023 in RSC Advances
Verified
Journal Article
Open access
PDF file
Ronaldo P. Parreño  JrRonaldo P. Parreño Jr
Ronaldo P. Parreño Jr
Sulfonation is among the frequently used surface modification methods to endow new surface properties on polymer fibers. Direct sulfonation is the simplest chemical modification via incorporation of sulfonate functional groups onto fibers' surfaces at ordinary conditions. However, the process of functionalization compromises other properties of the electrospun membrane due to the extent of sulfonation reaction that occurred. This study was carried out to determine the effects on microstructure and morphology of crosslinked electrospun polybenzoxazine (PBz) fibers by correlating the reaction kinetics using a specific reaction parameter with the degree of sulfonation (DS). The kinetics of sulfonation reaction for PBz fibers is an electrophilic-based, first-type substitution mechanism where only one sulfonic acid (–SO3H) group is attached to each of the repeating units in the aromatic structure of PBz under ordinary conditions. From a previous study, the rate of change of ion exchange capacity (IEC) was derived as a logarithmic correlation that increased rapidly for some time and became constant. This study employed the derived empirical relationship based on reaction kinetics to correlate the degree of sulfonation (DS) with IEC at varying reaction time. DS was calculated as 55%, 66% and 77%, for 3, 6 and 24 h, respectively. The maximum IEC of 2.71 with the corresponding DS of 100% was obtained theoretically but since sulfonation reaction kinetics at ordinary conditions proceeds at slower phase, it can only attain 86% DS with maximum IEC of 2.44 at a calculated time of 48 h. Sulfonation was confirmed by the functional groups present in the structural composition of PBz fibers using ATR-FTIR which were quantified based on the absorbance in the IR spectra showing an increased peak height with increased reaction time for the first 6 h. Morphological analyses using SEM images revealed an increase in fiber diameter with increased sulfonation time. In addition, the higher reaction time showed the effects of longer acid exposure which compromised the fibers' structural integrity with the presence of broken fibers and defects on fibers' surfaces after 24 h. The electrospun PBz fibers sulfonated for 6 h achieved the highest IEC value with DS of 66% which was enough to attain the balance of degree of sulfonation with electrochemical and morphological properties.

25 March 2022 in RSC Advances
Verified
Journal Article
Open access
PDF file
Ronaldo P. Parreño  JrRonaldo P. Parreño Jr
Ronaldo P. Parreño Jr
ABArnel Beltran
Arnel Beltran
Nafion compatibility in the preparation of hybrid composites with electrospun Polybenzoxazine (PBz) surface-modified fibers via ozonation by evaluating the effects on the surface and structure of the composite.

26 October 2019 in Nanomaterials
Verified
Journal Article
Open access
PDF file
Ronaldo P. Parreño  JrRonaldo P. Parreño Jr
Ronaldo P. Parreño Jr
YLYing-Ling Liu
Ying-Ling Liu
ABArnel Beltran
Arnel Beltran
This study demonstrated the processability of sulfur copolymers (SDIB) into polymer blend with polybenzoxazines (PBz) and their compatibility with the electrospinning process. Synthesis of SDIB was conducted via inverse vulcanization using elemental sulfur (S8). Polymer blends produced by simply mixing with varying concentration of SDIB (5 and 10 wt%) and fixed concentration of PBz (10 wt%) exhibited homogeneity and a single-phase structure capable of forming nanofibers. Nanofiber mats were characterized to determine the blending effect on the microstructure and final properties. Fiber diameter increased and exhibited non-uniform, broader fiber diameter distribution with increased SDIB. Microstructures of mats based on SEM images showed the occurrence of partial aggregation and conglutination with each fiber. Incorporation of SDIB were confirmed from EDX which was in agreement with the amount of SDIB relative to the sulfur peak in the spectra. Spectroscopy further confirmed that SDIB did not affect the chemistry of PBz but the presence of special interaction benefited miscibility. Two distinct glass transition temperatures of 97 °C and 280 °C indicated that new material was produced from the blend while the water contact angle of the fibers was reduced from 130° to 82° which became quite hydrophilic. Blending of SDIB with component polymer proved that its processability can be further explored for optimal spinnability of nanofibers for desired applications.

1 April 2020 in IOP Conference Series: Materials Science and Engineering
Verified
Conference Paper
Open access
Ronaldo P. Parreño  JrRonaldo P. Parreño Jr
Ronaldo P. Parreño Jr
YLYing-Ling Liu
Ying-Ling Liu
ABArnel Beltran
Arnel Beltran
Elemental sulfur (S8) is largely available resource as by-product from petroleum refining process which is causing “excess sulfur problem’ due to its limited usage. The utilization of sulfur as valuable material will not only address environmental concerns but provide cost-effective ways of consuming this huge amount of waste to develop new high-value, high-volume products. One facile synthetic method of utilizing sulfur directly as feedstock to produce polymeric material is inverse vulcanization. In this study, sulfur copolymers (SDIB) was synthesized via inverse vulcanization from S8 and processed into polymer blend with component polymers, polybenzoxazine (PBz) and poly(methyl methacrylate) (PMMA) to show its potential processability into polymer blend. Initially, synthesis of SDIB with varying feed ratios of sulfur to comonomer 1, 3-diisopropenylbenzene (DIB) was evaluated for its resulting properties. Spectroscopy showed copolymerization reactions occurred based on the change in characteristic absorption peaks (C=C-H, C=C, C-H) present in the spectra. Thermogravimetric analysis (TGA) indicated that SDIB is more thermally stable with the increase in onset temperature of degradation. Differential scanning calorimetry (DSC) profile exhibited new single glass transition temperature (Tg) that slightly increased with higher DIB ratio indicating evolution of microstructures of copolymers produced. The processability of SDIB into polymer blend was investigated by using SDIB (50 wt% S) with PBz and PMMA. Blending process using simple mixing technique with solvents was carried out for SDIB/PBz (10/10 wt%) and SDIB/PMMA (7.65/7.65 wt%) blend compositions. The results of this study demonstrated that polymercopolymers interactions influenced the phase structure and behaviour with polymer blend of SDIB/PBz showing higher degree of miscibility with more homogeneous and transparent blend as compared to SDIB/PMMA blend. The suitability of polymer blend in electrospinning of nanofibers could provide variety of new applications for SDIB.

9 March 2021 in RSC Advances
Verified
Journal Article
Open access
PDF file
Ronaldo P. Parreño  JrRonaldo P. Parreño Jr
Ronaldo P. Parreño Jr
YLYing-Ling Liu
Ying-Ling Liu
ABArnel Beltran
Arnel Beltran
Microstucture and morphology of thermally-modified electrospun fiber of PBz blended with SDIB that enhanced structural satbility and integrity.