Sahar Safarian

Dr. Sahar Safarian

Chalmers University of Technology, Gothenburg, Västra Götaland, Sweden
orcid

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
29 May 2022 in Energies
Verified
Journal Article
Open access
PDF file
Sahar SafarianSahar Safarian
Sahar Safarian
Magnus RydénMagnus Rydén
Magnus Rydén
MJMatty Janssen
Matty Janssen
Biomass pyrolysis is considered as a thermochemical conversion system that is performed under oxygen-depleted conditions. A large body of literature exists in which thermodynamic equilibrium (TE) and kinetic approaches have been applied to predict pyrolysis products. However, the reliability, accuracy and predictive power of both modeling approaches is an area of concern. To address these concerns, in this paper, two new simulation models based on the TE and kinetic approaches are developed using Aspen Plus, to analyze the performance of each approach. Subsequently, the results of two models are compared with modeling and experimental results available in the literature. The comparison shows that, on the one hand, the performance of the TE approach is not satisfactory and cannot be used as an effective way for pyrolysis modeling. On the other hand, the results generated by the new model based on the kinetic approach suggests that this approach is suitable for modeling biomass pyrolysis processes. Calculation of the root mean square error (RMS), to quantify the deviation of the model results from the experiment results, confirms that this kinetic model presents superior agreement with experimental data in comparison with other kinetic models in the literature. The acquired RMS for the developed kinetic method in this paper varies within the span of 1.2 to 3.2 depending on temperature (400–600 °C) and various feedstocks (pine spruce sawdust, bagasse, wood bark, beech wood and paddy straw).

7 June 2018 in Energies
Verified
Journal Article
Open access
PDF file
Sahar SafarianSahar Safarian
Sahar Safarian
RURunar Unnthorsson
Runar Unnthorsson
This paper describes the development of a model to comprehensively assess the sustainability impacts of producing lignocellulosic bioethanol from various types of municipal organic wastes (MOWs) in Iceland: paper and paperboard, timber and wood and garden waste. The tool integrates significant economic, energy, environmental and technical aspects to analyse and rank twelve systems using the most common pretreatment technologies: dilute acid, dilute alkali, hot water and steam explosion. The results show that among the MOWs, paper and paperboard have higher positive rankings under most assessments. Steam explosion is also ranked at the top from the economic, energy and environmental perspectives, followed by the hot water method for paper and timber wastes. Finally, a potential evaluation of total wastes and bioethanol production in Iceland is carried out. The results show that the average production of lignocellulosic bioethanol in 2015 could be 12.5, 11 and 3 thousand tons from paper, timber and garden wastes, respectively, and that production could reach about 15.9, 13.7 and 3.7 thousand tons, respectively, by 2030.

1 May 2021 in Fermentation
Verified
Journal Article
Open access
PDF file
Sahar SafarianSahar Safarian
Sahar Safarian
SSSeyed Mohammad Ebrahimi Saryazdi
Seyed Mohammad Ebrahimi Saryazdi
RURunar Unnthorsson
Runar Unnthorsson
CRChristiaan Richter
Christiaan Richter
In order to accurately anticipate the proficiency of downdraft biomass gasification linked with a water–gas shift unit to produce biohydrogen, a model based on an artificial neural network (ANN) approach is established to estimate the specific mass flow rate of the biohydrogen output of the plant based on different types of biomasses and diverse operating parameters. The factors considered as inputs to the models are elemental and proximate analysis compositions as well as the operating parameters. The model structure includes one layer for input, a hidden layer and output layer. One thousand eight hundred samples derived from the simulation of 50 various feedstocks in different operating situations were utilized to train the developed ANN model. The established ANN in the case of product biohydrogen presents satisfactory agreement with input data: absolute fraction of variance (R2) is more than 0.999 and root mean square error (RMSE) is lower than 0.25. In addition, the relative impact of biomass properties and operating parameters on output are studied. At the end, to have a comprehensive evaluation, variations of the inputs regarding hydrogen-content are compared and evaluated together. The results show that almost all of the inputs show a significant impact on the smhydrogen output. Significantly, gasifier temperature, SBR, moisture content and hydrogen have the highest impacts on the smhydrogen with contributions of 19.96, 17.18, 15.3 and 10.48%, respectively. In addition, other variables in feed properties, like C, O, S and N present a range of 1.28–8.6% and proximate components like VM, FC and A present a range of 3.14–7.67% of impact on smhydrogen.

28 February 2021 in Biofuels
Verified
Journal Article
Closed access
Sahar SafarianSahar Safarian
Sahar Safarian
RURunar Unnthorsson
Runar Unnthorsson
CRChristiaan Richter
Christiaan Richter
This study develops a new simulation model by ASPEN Plus for gasification integrated with water-gas shift reactors and product recovery unit for hydrogen production. Timber and wood waste (T&WW) as a lignocellulosic biomass was also considered as the input feedstock to the system. Then, the model is applied to investigate the effect of two agents of air and a mixture of air-steam under different operating conditions of temperature and steam to biomass ratio (SBR). The results reveal that the produced hydrogen through the air-steam gasification is at the highest points for all studied temperatures and it would be maximum (44.37 kmol/hr per 1 ton T&WWs) at 700 °C. The hydrogen production efficiency (HPE) can be also raised, stemming from the growth of H2. It values 39.2% at SBR = 0.1 that grows to 70% at SBR = 0.9. The optimum SBR lies between 0.7–0.8 that specific mass flow rate of hydrogen would be higher than 0.1 kghydrogen/kgT&WW.

14 July 2020 in Fermentation
Verified
Journal Article
Open access
PDF file
Sahar SafarianSahar Safarian
Sahar Safarian
RURunar Unnthorsson
Runar Unnthorsson
CRChristiaan Richter
Christiaan Richter
This study presents a new simulation model developed with ASPEN Plus of waste biomass gasification integrated with syngas fermentation and product recovery units for bioethanol production from garden waste as a lignocellulosic biomass. The simulation model includes three modules: gasification, fermentation, and ethanol recovery. A parametric analysis is carried out to investigate the effect of gasification temperature (500–1500 °C) and equivalence ratio (0.2–0.6) on the gasification performance and bioethanol production yield. The results reveal that, for efficient gasification and high ethanol production, the operating temperature range should be 700–1000 °C, as well as an equivalence ratio between 0.2 and 0.4. At optimal operating conditions, the bioethanol production yield is 0.114 kg/h per 1 kg/h input garden waste with 50% moisture content. It is worth mentioning that this parameter increases to 0.217 kgbioethanol/kggarden waste under dry-based conditions.

1 October 2020 in Renewable and Sustainable Energy Reviews
Verified
Journal Article
Closed access
Sahar SafarianSahar Safarian
Sahar Safarian
RURunar Unnthorsson
Runar Unnthorsson
CRChristiaan Richter
Christiaan Richter