The presence of different pollutants in recycled plastics is reviewed in this article. The desirable circular economy of plastics should be linked to the availability of clean recycled plastics with a non-significant and small to nil amount of substances of concern. Different researchers found polycyclic aromatic hydrocarbons (PAHs) and Persistent Organic Pollutants (POPs), such as brominated flame retardants (BFRs), pesticides, dioxins and furans (PCDD/Fs and PBDD/Fs) in plastic recyclates. This represents an added difficulty to the effective recycling process of plastics that reduces the demand for energy and materials, in addition to posing a great environmental danger since they represent a vector of accumulation of the contaminants that will finally appear in the most unexpected products. Life Cycle Analysis of the plastic wastes recycling process indicates a great saving of energy, water and CO2 emissions.
Every year, many tonnes of Posidonia oceanica are removed from Mediterranean beaches to maintain the quality and pleasure of use of the beaches. Most of this waste ends up in landfills, entailing removal costs. In this work, the Posidonia oceanica material was characterised, and a washing system was developed to obtain biochar. An adequate washing of the starting biomass was shown to play a key role as it led to an over 90% salt content reduction and, therefore, a decrease in conductivity values. The use of biochar as a soil remediator improves soil properties, carbon sequestration, and plant growth. However, not all types of biochars are suitable for this type of application. Therefore, the properties of biochar made from Posidonia oceanica at different temperatures (300, 400, and 500 °C) were studied. All the biochars obtained showed to exceed 10% organic carbon, which is the lower limit to be applied to soils, the maximum percentage having been obtained at 300 °C. In addition, all presented pH values (8.02, 10.32, and 10.38 for the temperatures of 300, 400, and 500 °C, respectively) that were similar to those of other effective biochars for the remediation of acid soils.
Persistent organic pollutant inhibition in the combustion process of polyvinyl chloride (PVC) by prior addition of an inhibitor is currently being studied, reducing the emission of pollutants, and thus reducing the large amount of waste PVC destined for landfill. In this work, the use of sewage sludge (SS) as an alternative to chemical inhibitors to improve the quality emissions of the incineration of polyvinyl chloride waste (PVC e-waste) was studied and optimized. Different combustion runs were carried out at 850 °C in a laboratory tubular reactor, varying both the molar ratio Ri (0.25, 0.50, 0.75) between inhibitors (N + S) and chlorine (Cl) and the oxygen ratio λ (0.15, 0.50) between actual oxygen and stoichiometric oxygen. The emissions of several semivolatile compounds families such as polycyclic aromatic hydrocarbons (PAHs), polychlorobenzenes (ClBzs), and polychlorophenols (ClPhs), with special interest in the emissions of the most toxic compounds, i.e., polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans (PCDD/Fs) and dioxin-like polychlorinated biphenyls (dl-PCBs), were analyzed. A notable decrease in PCDD/F and dl-PCB formation was achieved in most of the experiments, especially for those runs performed under an oxygen-rich atmosphere (λ = 0.50), where the addition of sludge was beneficial with inhibition ratios Ri ≥ 0.25. An inhibition ratio of 0.75 showed the best results with almost a 100% reduction in PCDD/F formation and a 95% reduction in dl-PCB formation.
About Me
I am a chemical engineer graduated from the University of Alicante. Spain.
I am a chemical engineer graduated from the University of Alicante. Spain.