Gallium nitride nanorods were synthesized by a chemical vapor deposition using the reaction of gallium/gallium nitride with ammonia. All nanorods have, exclusively, a triangle cross section with an average diameter of 50 nm. They consist of single-crystalline wurtzite structure crystal grown with the [010] direction. X-ray diffraction and Raman spectroscopy data suggest no shift of the lattice constants from those of the bulk. Temperature-dependent photoluminescence exhibits the and free-to-bound emission peaks. The present triangular gallium nitride nanorods would be free from the stress, having the band-gap energy of the bulk.
In this study, we fabricate bendable solid-state supercapacitors with Au nanoparticle (NP)-embedded graphene hydrogel (GH) electrodes and investigate the influence of the Au NP embedment on the internal resistance and capacitive performance. Embedding the Au NPs into the GH electrodes results in a decrease of the internal resistance from 35 to 21 Ω, and a threefold reduction of the IR drop at a current density of 5 A/g when compared with GH electrodes without Au NPs. The Au NP-embedded GH supercapacitors (NP-GH SCs) exhibit excellent capacitive performances, with large specific capacitance (135 F/g) and high energy density (15.2 W·h/kg). Moreover, the NP-GH SCs exhibit comparable areal capacitance (168 mF/cm2) and operate under tensile/compressive bending.
In this study, we propose newly designed feedback field-effect transistors that utilize the positive feedback of charge carriers in single-gated silicon channels to achieve steep switching behaviors. The band diagram, I–V characteristics, subthreshold swing, and on/off current ratio are analyzed using a commercial device simulator. Our proposed feedback field-effect transistors exhibit subthreshold swings of less than 0.1 mV dec −1 , an on/off current ratio of approximately 10 11 , and an on-current of approximately 10 −4 A at room temperature, demonstrating that the switching characteristics are superior to those of other silicon-based devices. In addition, the device parameters that affect the device performance, hysteresis characteristics, and temperature-dependent device characteristics are discussed in detail.
18 February 2009 in Journal of Materials Chemistry
Resistance switching memory devices constructed on flexible plastic substrates via the spin-coating of titanium oxide solution were characterized in this study. The resistance switching memory device exhibited a ratio of the high resistance to low resistance states of more than 102, and this large resistance ratio was maintained even after 104 s. These memory characteristics are comparable to those of resistance switching memory devices based on titanium oxide films deposited on Si substrates. Moreover, the endurance of the flexible memory device investigated by means of a continuous substrate bending test revealed that the ratio of the high resistance to low resistance states was negligibly changed up to two hundred cycles. Its resistance switching characteristics were not degraded by the bending of the substrate, due to its short length channel and the high ductility of the electrode.