Shunda Qiao

Mr. Shunda Qiao

orcid

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 May 2024 in Light: Science & Applications
Verified
Journal Article
Open access
PDF file
Shunda QiaoShunda Qiao
Shunda Qiao
YHYing He
Ying He
HSHaiyue Sun
Haiyue Sun
PPPietro Patimisco
Pietro Patimisco
ASAngelo Sampaolo
Angelo Sampaolo
Yufei MaYufei Ma
Yufei Ma
Photoacoustic spectroscopy (PAS) as a highly sensitive and selective trace gas detection technique has extremely broad application in many fields. However, the laser sources currently used in PAS limit the sensing performance. Compared to diode laser and quantum cascade laser, the solid-state laser has the merits of high optical power, excellent beam quality, and wide tuning range. Here we present a long-wave, high-power, wide-tunable, single-longitudinal-mode solid-state laser used as light source in a PAS sensor for trace gas detection. The self-built solid-state laser had an emission wavelength of ~2 μm with Tm:YAP crystal as the gain material, with an excellent wavelength and optical power stability as well as a high beam quality. The wide wavelength tuning range of 9.44 nm covers the absorption spectra of water and ammonia, with a maximum optical power of ~130 mW, allowing dual gas detection with a single laser source. The solid-state laser was used as light source in three different photoacoustic detection techniques: standard PAS with microphone, and external- and intra-cavity quartz-enhanced photoacoustic spectroscopy (QEPAS), proving that solid-state laser is an attractive excitation source in photoacoustic spectroscopy.

1 January 2024 in Opto-Electronic Advances
Verified
Journal Article
Closed access
PDF file
YLYahui Liu
Yahui Liu
Shunda QiaoShunda Qiao
Shunda Qiao
CFChao Fang
Chao Fang
YHYing He
Ying He
HSHaiyue Sun
Haiyue Sun
Yufei MaYufei Ma
Yufei Ma
A highly sensitive light-induced thermoelectric spectroscopy (LITES) sensor based on a multi-pass cell (MPC) with dense spot pattern and a novel quartz tuning fork (QTF) with low resonance frequency is reported in this manuscript. An erbium-doped fiber amplifier (EDFA) was employed to amplify the output optical power so that the signal level was further enhanced. The optical path length (OPL) and the ratio of optical path length to volume (RLV) of the MPC is 37.7 m and 13.8 cm-2, respectively. A commercial QTF and a self-designed trapezoidal-tip QTF with low frequency of 9461.83 Hz were used as the detectors of the sensor, respectively. The target gas selected to test the performance of the system was acetylene (C2H2). When the optical power was constant at 1000 mW, the minimum detection limit (MDL) of the C2H2-LITES sensor can be achieved 48.3 ppb when using the commercial QTF and 24.6 ppb when using the trapezoidal-tip QTF. An improvement of the detection performance by a factor of 1.96 was achieved after replacing the commercial QTF with the trapezoidal-tip QTF.

1 January 2024 in Opto-Electronic Science
Verified
Journal Article
Closed access
PDF file
HSHaiyue Sun
Haiyue Sun
YHYing He
Ying He
Shunda QiaoShunda Qiao
Shunda Qiao
YLYahui Liu
Yahui Liu
Yufei MaYufei Ma
Yufei Ma
In this paper, a novel highly sensitive methane (CH4) and acetylene (C2H2) dual-gas light-induced thermoelectric spectroscopy (LITES) sensor based on Lissajous space-division multiplexed (LSDM) technology and trapezoidal-head quartz tuning fork (QTF) detector was reported for the first time. A theoretical LSDM model was established on the basis of three-mirror astigmatic multi-pass cell (MPC) and it was used to design a pair of Lissajous spot patterns with optical path length to volume ratios (OPL/Vs) of 13.5 cm-2 and 13.3 cm-2, respectively. Two self-designed trapezoidal-head QTFs with low resonant frequencies of less than 10 kHz and quality factor of ~12000 were adopted to enhance the detection ability. Two kinds of fiber amplifier, erbium doped fiber amplifier (EDFA) and Raman fiber amplifier (RFA), were combined to amplify the output power of two diode lasers to improve the excitation strength. After optimization, minimum detection limit (MDL) of 268.8 ppb and 91.4 ppb for real-simultaneous CH4 and C2H2 sensing were obtained, respectively. When the integration time of the system were 150 s and 100 s, the MDLs could be improved to 54.8 ppb and 26.1 ppb, accordingly. Further improvement methods for such sensor were discussed.

1 January 2023 in Ultrafast Science
Verified
Journal Article
Closed access
YMYufei Ma
Yufei Ma
TLTiantian Liang
Tiantian Liang
Shunda QiaoShunda Qiao
Shunda Qiao
XLXiaonan Liu
Xiaonan Liu
ZLZiting Lang
Ziting Lang
As a new energy source, hydrogen (H 2 ) detection is a hot topic in recent years. Because of the weak absorption characteristic, laser spectroscopy-based H 2 detection is challenging. In this paper, a highly sensitive H 2 sensor based on light-induced thermoelastic spectroscopy (LITES) technique is demonstrated for the first time. A continuous-wave, distributed feedback diode laser with emission in the 2.1 μm region was adopted as the excitation source to target the strongest H 2 absorption line of 4,712.90 cm −1 . A Herriott multipass cell with an optical length of 10.1 m was chosen to further improve the H 2 absorption. With the feature of processing the raw input data without data preprocessing and extracting the desired features automatically, the robust shallow neural network (SNN) fitting algorithm was brought in to denoise the sensor. For the LITES-based H 2 sensor, the concentration response was tested, and an excellent linear response to H 2 concentration levels was achieved. A minimum detection limit (MDL) of ~80 ppm was obtained. On the basis of implementation of the H 2 -LITES sensor, a heterodyne H 2 -LITES sensor was further constructed to realize a fast measurement of resonance frequency of quartz tuning fork and H 2 concentration simultaneously. The resonance frequency can be retrieved in several hundred milliseconds with the measurement accuracy of ±0.2 Hz, and the result of 30,713.76 Hz is exactly same as the experimentally determined value of 30,713.69 Hz. After the SNN algorithm was applied, an MDL of ~45 ppm was achieved for this heterodyne H 2 -LITES sensor.

23 October 2024 in Applied Physics Reviews
Verified
Journal Article
Closed access
PDF file
Yufei MaYufei Ma
Yufei Ma
Shunda QiaoShunda Qiao
Shunda Qiao
RWRunqiu Wang
Runqiu Wang
YHYing He
Ying He
CFChao Fang
Chao Fang
TLTiantian Liang
Tiantian Liang
A novel tapered quartz tuning fork (QTF) was designed to enhance its stress magnitude and charge distribution in QTF-based laser spectroscopy, which had a low resonant frequency of 7.83 kHz and a wide fork gap for long energy accumulation time and easy optical alignment. Compared to the reported rectangular QTF, this tapered QTF transfers the maximum stress position from the root to the middle to improve its sensing performance. Furthermore, the unique design eliminates the 90° right angles typically found in standard QTFs, which often lead to undesired “webs” and “facets” during the etching process. This design minimizes performance degradation by reducing the presence of residual unexpected materials. QTF-based laser spectroscopy of quartz-enhanced photoacoustic spectroscopy (QEPAS) and light-induced thermoelastic spectroscopy (LITES) were adopted to verify its performance. Compared with the widely used standard QTF, the total surface charge of the tapered QTF was improved 5.08 times and 5.69 times in QEPAS and LITES simulations, respectively. Experiments revealed that this tapered QTF-based QEPAS sensor had a 3.02 times improvement in signal-to-noise-ratio (SNR) compared to the standard QTF-based system. Adding an acoustic micro-resonator to this tapered QTF-based QEPAS sensor improved the signal level by 97.20 times. The minimum detection limit (MDL) for acetylene (C2H2) detection was determined to be 16.45 ppbv. In the LITES technique, compared to the standard QTF, this tapered QTF-based sensor had a 3.60 times improvement in SNR. The MDL for C2H2 detection was determined to be 146.39 ppbv.

6 January 2020 in Applied Physics Letters
Verified
Journal Article
Open access
PDF file
Yufei MaYufei Ma
Yufei Ma
YHYing He
Ying He
PPPietro Patimisco
Pietro Patimisco
ASAngelo Sampaolo
Angelo Sampaolo
Shunda QiaoShunda Qiao
Shunda Qiao
Vincenzo SpagnoloVincenzo Spagnolo
Vincenzo Spagnolo
A highly sensitive trace gas sensor based on light-induced thermoelastic spectroscopy (LITES) and a custom quartz tuning fork (QTF) is reported. The QTF has a T-shaped prong geometry and grooves carved on the prongs' surface, allowing a reduction of both the resonance frequency and the electrical resistance but retaining a high resonance quality factor. The base of the QTF prongs is the area maximizing the light-induced thermoelastic effect. The front surface of this area was left uncoated to allow laser transmission through the quartz, while on the back side of the QTF, a gold film was coated to back-reflect the laser beam and further enhance the light absorption inside the crystal. Acetylene (C2H2) was chosen as the target gas to test and validate the LITES sensor. We demonstrated that the sensor response scales linearly with the laser power incident on the prong base, and the optimum signal to noise ratio was obtained at an optical power of 4 mW. A minimum detection limit of ∼325 ppb was achieved at an integration time of 1 s, corresponding to a normalized noise equivalent absorption coefficient of 9.16 × 10−10 cm−1W/√Hz, nearly one order of magnitude better with respect to the value obtained with a standard 32.768 kHz QTF-based LITES sensor under the same experimental conditions.