The millimeter-wave (mmWave) antennas for smartphones are one of the key components to complete the transition to 5G mobile networks. Although research and development of mmWave 5G antennas for cellular handsets are currently at the center of a significant research effort in both academia and telecommunication industry, a systematic antenna design approved by wireless community has not been proposed yet. With this communication, we propose a novel, high gain, wide band and compact mmWave 5G antenna, namely clover antenna for cellular handsets. The presented antenna has clover like conductor profile whose parameters can be adjusted to obtain high gain or wide band. The designed antennas are simulated with a widely used full-wave analysis tool. Numerical results of the mmWave antenna are confirmed successfully by the experimental results in 24-28 GHz band. The antenna achieves measured peak gain of 7.8-9 dBi in the band. Besides, with a 16-element clover antenna array, the beam steering capability of the antenna is demonstrated. Beam steering between ±45° is achieved with low side lobe levels. Practical design considerations for the integration of the arrays in handset to obtain full-coverage in horizontal plane are investigated. The calculated spatial peak power density values of the proposed array on the outer surface of a head phantom are demonstrated for different scan angles.
Graphene electro-optic modulators (GEOMs) are emerging as a viable alternative to conventional material-based modulators mainly due to their broadband and ultrafast performance. These GEOMs with combined advantages of small footprint and low energy consumption can potentially enable various high-performance applications that are not possible using conventional approaches. Here, we report the first actively Q-switched lasers with a GEOM. In contrast to the previously reported lasers that are passively modulated by two-dimensional layered material-based saturable absorbers, our actively modulated laser concept represents significant advantages, such as electrically tunable output parameters (e.g. output repetition rate, pulse duration and pulse energy) and electro-optical synchronization. Using a single GEOM, we generate broadband Q-switched pulses at ~1.55 and 2 μm with output energies of up to 123 nJ. This indicates the broadband pulse generation capability of the graphene-based active devices, superior to widely used bulk material-based active modulation approaches. Our results demonstrate a simple and viable design towards broadband, high-repetition-rate, electrically modulated ultrafast lasers for various applications, such as telecommunications and spectroscopy.
This paper presents a unique penta-band metamaterial absorber platform for terahertz imaging systems.The proposed fractal metamaterial absorber (FMMA) consists of fractal triangle section metasurfaces. By combining fractal resonators posing different operation skills in the same unit cell, the absorber shows multiband spectral response. The proposed unit cell structure operates at five near perfect absorption modes corresponding to the frequency bands of 1.1 THz, 3.4 THz, 4.9 THz, 5.9 THz, and 7.8 THz, respectively. Based on the fractal metamaterial absorber array, we also propose a sensing pixel design for bimaterial cantilever array sensing systems. The single pixel assembles 4x6 fractal resonator array and $$SiO_2$$ -Al bimaterial microcantilevers. The sensing region of the FMMA pixel can bend the bimaterial cantilevers effectively at multiple modes, enhancing the imaging capacity. The effective medium theory is executed to visualize the constitute parameters during the absorption and reveal the origin of the rising modes. The absorption mechanism is also discussed based on the surface current distributions and electric field profiles. The numerical outcomes prove that the proposed fractal metamaterial unit cell is a promising candidate as an absorbing platform for THz band sensing and imaging applications. The derived iterative formula used in the fractal design procedure is explained for further investigations of microelectromechanical systems (MEMS) compatible compact absorber arrays.
27 July 2021 in IEEE Transactions on Components, Packaging and Manufacturing Technology
This article introduces a novel method of laser ablation patterning-based additive manufacturing (AM) to develop a broadband planar antenna for sub-6 GHz wireless communications applications. The presented technique consists of fused deposition modeling (FDM) and the laser ablation cutting-based metal patterning. The metal layer is transferred to a thermoplastic-based ABS substrate without any postprocessing. FDM and metal patterning are independent operations in our procedure and therefore the proposed prototyping is time-efficient compared to the current AM techniques. The 3-D printed antenna is in the form of the single-layer ABS substrate–metal radiator fed by a coplanar waveguide (CPW). The antenna is also printed on an FR-4 substrate using printed circuit board (PCB) technology, and the radiation skills of the 3-D printed antenna are benchmarked with its PCB counterpart. The numerical results obtained with a full-wave analysis tool are verified by the experimental results. The proposed antenna operates on a broadband covering 2.54–5.84-GHz band with the peak gain around 4 dBi and meets the requirements of the Worldwide Interoperability for Microwave Access (WiMAX) and wireless local area network (WLAN) band applications. The fabricated 3D-printed antenna is loaded to human body, and the reflection coefficients are measured for off-body communication links. The calculated electromagnetic power density profiles on the human phantom are demonstrated for various operating frequencies.
Unmanned aerial vehicles (UAVs) are increasingly significant in modern warfare due to their versatility and capacity to perform high-risk missions without risking human lives. Beyond surveillance and reconnaissance, UAVs with jet propulsion and engagement capabilities are set to play roles similar to conventional jets. In various scenarios, military aircraft, drones, and UAVs face multiple threats while ground radar systems continuously monitor their positions. The interaction between these aerial platforms and radars causes temporal fluctuations in scattered echo power due to changes in aspect angle, impacting radar tracking accuracy. This study utilizes the potential radar cross-section (RCS) dynamics of an aircraft throughout its flight, using ground radar as a reference. Key factors influencing RCS include time, frequency, polarization, incident angle, physical geometry, and surface material, with a focus on the complex scattering geometry of the aircraft. The research evaluates the monostatic RCS case and examines the impact of attitude variations on RCS scintillation. Here, we present dynamic RCS modeling by examining the influence of flight dynamics on the RCS fluctuations of a UAV-sized aircraft. Dynamic RCS modeling is essential in creating a robust framework for operational analysis and developing effective countermeasure strategies, such as advanced active decoys. Especially in the cognitive radar concept, aircraft will desperately need more dynamic and adaptive active decoys. A methodology for calculating target aspect angles is proposed, using the aircraft’s attitude and spherical position relative to the radar system. A realistic 6DoF (6 degrees of freedom) flight data time series generated by a commercial flight simulator is used to derive aircraft-to-radar aspect angles. By estimating aspect angles for a simulated complex flight trajectory, RCS scintillation throughout the flight is characterized. The study highlights the importance of maneuver parameters such as roll and pitch on the RCS measured at the radar by comparing datasets with and without these parameters. Significant differences were found, with a 32.44% difference in RCS data between full maneuver and no roll and pitch changes. Finally, proposed future research directions and insights are discussed.