A numerical investigation was conducted in this study utilizing Force Element Analysis to explore the vortex-induced vibration (VIV) mechanism of side-by-side dual cylinders under the conditions of Reynolds number Re = 100, mass ratio m* = 10, and spacing ratios L/D ranging from 3 to 6. The hydrodynamic forces by force element formulas were incorporated into the vibration response calculations of elastically supported rigid cylinders using a User-Defined Function (UDF) and the fourth-order Runge–Kutta method. A comprehensive analysis was performed to elucidate the combined effects of the spacing ratio L/D and reduced velocity Ur on the vibration responses, quantifying the hydrodynamic forces involved in the mutual interaction during VIV for side-by-side dual cylinders. The influence mechanisms of inter-cylinder interaction and their effects on the resultant hydrodynamic phenomena were discussed. It was revealed that for side-by-side arranged dual cylinders outside the “lock-in region”, the lift and drag forces are predominantly supplied by the volume vorticity forces in conjunction with surface vortices (including frictional) forces. However, within the “lock-in region”, the surface acceleration lift forces provide greater force contributions, and the volume vorticity lift force contributes significantly to negative values. Notably, alterations to the spacing ratio do not change the proportion of force element components. The amplitudes of the cylinders’ mutual interaction forces are identical in magnitude but opposite in phase. Additionally, the “slapping” phenomenon near the “lock-in region” leads to “bounded” trajectories of cylinders.
A microshaft may become rough due to corrosion, abrasion, and deposition when it has been operating in a viscous fluid. It is of importance to investigate the effects and to estimate the level of the shaft’s surface roughness. In this study, we consider a bumpy shaft with its shape modeled by the product of two cosinoidal functions; the roughness ε is defined to be the ratio of the amplitude of the product to the mean radius b of the shaft. First, we consider the Couette flow of the shaft in a viscous fluid enclosed by a rotating smooth cylinder. A perturbation analysis is carried out for the Stokes equation with respect to ε up to the second-order with the key parameters including the azimuthal wave number n and the axial wave number α of the roughness, as well as the mean radius b. In addition, a perturbation analysis is performed for the Poiseuille flow in the gap between the shaft and the shrouded cylinder so that we have complete information for estimating the mean roughness of the shaft. Moreover, numerical simulations are carried out for the torque acting on the shaft at selected b, ε, and wave numbers n, α for verifying the accuracy of the perturbation results. It is shown that the mean torque M acting on the unit area of the bumpy shaft and the total flow rate Q of the Poiseuille flow are both modified by a second-order term of roughness in ε, namely, M = M0 + ε2η and Q = Q0 − ε22πχ, where M0 and Q0 denote the torque and the flow rate, respectively, for the smooth shaft. The net effects are conveniently written as η = η1 + η2 and χ = χ1 + χ2, both comprising two components: η1 = η1 (b) < 0 (pure deficit) increases with increasing b and χ1 = χ1 (b) first increases and then decreases again with increasing b, while η2 and χ2 are complex functions of b, n, and α. For a given density of roughness Ac = nα, there exists an intermediate n at which the mean torque M is minimized, while the total flow rate Q is maximized. The main results are thoroughly derived with all the steps of derivation explained physically, and their relationships to the various geometrical parameters are used to establish a simplified model for predicting the shaft roughness within the range of reasonable accuracy.
Cavitation is typically observed when high-pressure submerged water jets are used. A composite nozzle, based on an organ pipe, can increase shear stress on the incoming flow, significantly enhancing cavitation performance by stacking Helmholtz cavities in series. In the present work, the flow field of the composite nozzle was numerically simulated using Large Eddy Simulation and was paired with the response surface method for global optimizing the crucial parameters of the composite nozzle to examine their effect on cavitation behavior. Utilizing peak gas-phase volume percent as the dependent variable and the runner diameter, Helmholtz chamber diameter, and Helmholtz chamber length as independent variables, a mathematical model was constructed to determine the ideal parameters of the composite nozzle through response surface methodology. The optimized nozzle prediction had an error of only 2.04% compared to the simulation results, confirming the accuracy of the model. To learn more about the cavitation cloud properties, an experimental setup for high-pressure cavitation jets was also constructed. Impact force measurements and high-speed photography tests were among the experiments conducted. The simulated evolution period of cavitation cloud characteristics is highly consistent with the experimental period. In the impact force measurement experiment, the simulated impact force oscillates between 256 and 297 N, and the measured impact force oscillates between 260 N and 289 N, with an error between 1.5% and 2.7%. The simulation model was verified by experimental results. This study provides new insights for the development of cavitation jet nozzle design theory.
This work numerically investigates the two-degree-of-freedom flow-induced vibration (FIV) of rigidly coupled square-circular cylinders at Reynolds number Re = 150, mass ratio m* = 2, and reduced velocity Ur = 2–16 under different configurations. The aim of this work is to understand the complex dynamic interactions between fluid and the structure. Force Element Theory (FET) is employed to analyze the underlying mechanisms of FIV, focusing on the influence of geometric parameters and configurations on the vibration characteristics of the coupled system. By systematically varying the spacing ratios and arrangements of square-circular cylinders, the force element contributions under various FIV conditions are quantified to identify optimal configurations. The results indicate that different configurations can alter the phase relationship between force elements and total hydrodynamic forces, thereby changing contributions of force elements. Instead of being placed upstream, the square cylinder placed downstream results in more chaotic vortex shedding patterns. Among the configurations, 4D-US and 6D-DS (where 4D and 6D is the center-to-center distance between the two cylinders, D is the cylinder diameter, US and DS are the different arrangements that square cylinder placed upstream and downstream, respectively) exhibit the highest drag and lift coefficients, respectively. The diagnostic analysis using FET helps to explain the mechanism of how the spacing and arrangement affect the vortex structure of whole flow field and phase of forces, thus determining the fact that the total drag and lift has been revealed. In general, the forces under different configurations can be inferred from the flow field morphology.
About Me
Vortex-induced vibration (VIV) of marine engineering equipments by Force Element Analysis and numerical simulation.
Vortex-induced vibration (VIV) of marine engineering equipments by Force Element Analysis and numerical simulation.