Mixed matrix membranes (MMMs) provide an efficient implementation that overcomes the bottleneck of individual inorganic or polymeric membranes for gas separation, but still face challenges. Here, we put forward a strategy of using in situ synthesized polymer grafted metal organic frameworks (MOFs) to eliminate both interfacial and carrier problems existing in the MMMs. Specifically, polyethyleneimine (PEI) grafted ZIF-8 (PEI-g-ZIF-8) was synthesized in situ by using Zn2+, 2-methylimidazole, and hyperbranched PEI through a rapid method at room-temperature. The chemical composition and porous structure of PEI-g-ZIF-8 were investigated by Fourier transform infrared spectroscopy, powder X-ray diffraction, N2 adsorption–desorption measurement, etc. The results indicated that the synthesized PEI-g-ZIF-8 achieves an enlarged pore volume and aminated surface. The improved interfacial compatibility between PEI-g-ZIF-8 nanoparticles and poly(vinylamine) (PVAm) was confirmed through high-sensitivity differential scanning calorimetry and zeta potential measurements. According to the CO2/gas separation tests, the MMMs incorporating with PEI-g-ZIF-8 achieved 1990 GPU of CO2 permeance and 79.9 of selectivity for CO2/N2 (15/85 vol%) separation, and 1790 GPU of CO2 permeance and 40.7 of selectivity for CO2/CH4 (10/90 vol%) separation, under 0.30 MPa gas pressure.
7 March 2024 in Environmental Science & Technology
In this work, polyethersulfone (PES)/polyaniline (PANI) nanocomposite membranes were fabricated by an immersion precipitation process through incorporation of uniform and well-dispersed PANI nanorods. Transmission electron microscopy (TEM) and dynamic light scattering (DLS) were used to identify the nanoparticle size and dispersion. The influence of incorporated PANI nanorods on membrane structure was investigated by attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR) and scanning electron microscopy (SEM). The properties of the nanocomposite membrane were evaluated by water contact angle, cross-flow ultrafiltration (UF) and antifouling measurements. The results indicated that the surface pore structure and hydrophilicity of PES membrane were improved by the incorporation of PANI nanorods. The PES/PANI nanocomposite membrane showed higher flux and better antifouling properties compared to the pure PES membrane without sacrificing the separation performance of BSA protein. Meanwhile, PES/PANI nanocomposite membrane was also used as the substrate to prepare a gas separation composite membrane by coating polyvinylamine (PVAm) aqueous solution on the surface. The gas permeation results showed that the PVAm/PES/PANI composite membrane exhibited higher gas permselectivity for CO2–N2 separation than the PVAm/PES composite membrane, which may result from the improved surface porosity of PES/PANI substrate and the improved interface adhesion between the selective layer and the substrate.