This review provides an analysis of recent scientific and engineering literature on chemical methods for CO2 processing using heterogeneous catalysts. The following major uses of carbon dioxide are discussed: exhaustive hydrogenation; synthesis of hydrocarbons including light olefins; synthesis of oxygenates; and production of cyclic carbonates. Furthermore, the paper highlights the main design approaches for CO2 conversion catalysts and formulates priorities for decarbonization using heterogeneous catalytic reactions.
A kinetic model for the olefins synthesis from dimethyl ether on zeolite HZSM-5 based catalysts is developed. The model includes the reaction pathways for the synthesis of olefins from oxygenates in the olefinic and aromatic cycles according to modern concepts of the dual-cycle reaction mechanism. The kinetic parameters were determined for the time-stable hydrothermally treated catalysts of various activities Mg-HZSM-5/Al2O3, HZSM-5/Al2O3, and Zr-HZSM-5/Al2O3. The kinetic parameters determination and the solution of the ordinary differential equations system were carried out in the Python software environment. The preliminary estimation of the kinetic parameters was carried out using the Levenberg-Marquardt algorithm, and the parameters were refined using the genetic algorithm. It is shown that reactions activation energies for different catalysts are close, which indicates that the priority of the reaction paths on the studied catalysts is the same. Thus, the topology of the zeolite plays a leading role in the determination of the synthesis routes, rather than the nature of the modifying metal. The developed model fits the experimental data obtained in an isothermal reactor in the range of temperature 320–360 °C, specified contact time 0.1–3.6 h*gcat/gC with a relative error of less than 15%.
A series of catalysts based on hybrid intergrowth structure zeolites MFI-MEL, MFI-MTW, and MFI-MCM-41 are studied in the reaction of olefins synthesis from dimethyl ether at atmospheric pressure and a temperature of 340 °C. The total acidity of hybrid zeolite-based catalysts is shown to correlate with their activity. However, the use of zeolite with the structure MFI-MCM-41, which is characterized by a high content of medium acid sites, additionally catalyzes the methanol dehydration reaction, resulting in a decrease in the observed DME conversion. The obtained product distributions are brought into correlation with the texture of catalysts. It is shown that the use of hybrid zeolites does not change the mechanism of reaction, but the structural features of zeolites influence the priority of the competing MTO reactions: high ethylene yield is observed for catalysts with high micropore volume. The topology of the hybrid zeolite has been shown to influence the hydrogen transfer reaction rate, but not to change the isomerizing activity of the catalyst.
18 March 2021 in Industrial & Engineering Chemistry Research