Stefan Karlsson

Dr. Stefan Karlsson

RISE Research Institutes of Sweden AB, Växjö, Kronoberg, Sweden
orcid
Glass Scientist at RISE Research Institutes of Sweden

Research Focus & Metrics

Academic Career Length

27Years (2000-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
19 August 2020 in Progress in Photovoltaics: Research and Applications
Verified
Journal Article
Open access
PDF file
BABenjamin L. Allsopp
Benjamin L. Allsopp
RORobin Orman
Robin Orman
SJSimon R. Johnson
Simon R. Johnson
IBIan Baistow
Ian Baistow
GSGavin Sanderson
Gavin Sanderson
Stefan KarlssonStefan Karlsson
Stefan Karlsson
For the solar energy industry to increase its competitiveness, there is a global drive to lower the cost of solar‐generated electricity. Photovoltaic (PV) module assembly is material‐demanding, and the cover glass constitutes a significant proportion of the cost. Currently, 3‐mm‐thick glass is the predominant cover material for PV modules, accounting for 10%–25% of the total cost. Here, we review the state‐of‐the‐art of cover glasses for PV modules and present our recent results for improvement of the glass. These improvements were demonstrated in terms of mechanical, chemical and optical properties by optimizing the glass composition, including addition of novel dopants, to produce cover glasses that can provide (i) enhanced UV protection of polymeric PV module components, potentially increasing module service lifetimes; (ii) re‐emission of a proportion of the absorbed UV photon energy as visible photons capable of being absorbed by the solar cells, thereby increasing PV module efficiencies and (iii) successful laboratory‐scale demonstration of proof of concept, with increases of 1%–6% in Isc and 1%–8% in Ipm. Improvements in both chemical and crack resistance of the cover glass were also achieved through modest chemical reformulation, highlighting what may be achievable within existing manufacturing technology constraints.

1 September 2017 in Journal of Non-Crystalline Solids
Verified
Journal Article
Open access
RLRené Limbach
René Limbach
Stefan KarlssonStefan Karlsson
Stefan Karlsson
GSGarth Scannell
Garth Scannell
RMRenny Mathew
Renny Mathew
MEMattias Edén
Mattias Edén
Lothar WondraczekLothar Wondraczek
Lothar Wondraczek
Titania represents an important compound for property modifications in the widespread family of soda lime silicate glasses. In particular, such titania-containing glasses offer interesting optical and mechanical properties, for example, for substituting lead-bearing consumer glasses. Here, we provide a systematic study of the effect of TiO2 on the structural, thermal, and mechanical properties for three series of quaternary Na2O–CaO–TiO2–SiO2 glasses with TiO2 concentrations up to 12 mol% and variable Na2O, CaO, and SiO2 contents. Structural analyses by Raman and magic-angle spinning 29Si NMR spectroscopy reveal the presence of predominantly four-fold coordinated Ti[4] atoms in glasses of low and moderate TiO2 concentrations, where Si–O–Si bonds are replaced by Si–O–Ti[4] bonds that form a network of interconnected TiO4 and SiO4 tetrahedra, with a majority of the non-bridging oxygen ions likely being located at the SiO4 tetrahedra. At higher TiO2 contents, TiO5 polyhedra are also formed. Incorporation of TiO2 strongly affects the titanosilicate network connectivity, especially when its addition is accompanied by a decrease of the CaO content. However, except for the thermal expansion coefficient, these silicate-network modifications seem to have no impact on the thermal and mechanical stability. Instead, the compositional dependence of the thermal and mechanical properties on the TiO2 content stems from its effect on the network energy and packing efficiency

10 February 2019 in International Journal of Applied Glass Science
Verified
Journal Article
Closed access
PDF file
LBLina Grund Bäck
Lina Grund Bäck
SASharafat Ali
Sharafat Ali
Stefan KarlssonStefan Karlsson
Stefan Karlsson
DMDoris Möncke
Doris Möncke
EKEfstratios I. Kamitsos
Efstratios I. Kamitsos
BJBo Jonson
Bo Jonson

18 October 2019 in Frontiers in Materials
Verified
Journal Article
Open access
PDF file
WJWilhelm Johansson
Wilhelm Johansson
APAlbert Peralta
Albert Peralta
BJBo Jonson
Bo Jonson
SASrinivasan Anand
Srinivasan Anand
LÖLars Österlund
Lars Österlund
Stefan KarlssonStefan Karlsson
Stefan Karlsson
Failure of PV modules frequently occurs as a result of degradation of their encapsulation material by destructive UV radiation. Both the life expectancy and efficiency of PV modules can be improved by reducing the transmittance of the destructive UV radiation through the cover glass without compromising the transmittance in the visible wavelength region. In addition, if the absorbed UV photons can be down-shifted to wavelengths that can be more efficiently converted to electrical energy, an additional increase of the PV efficiency could be achieved. In this study we have investigated transparent ZnO and TiO2 thin films deposited by spray pyrolysis on soda lime silicate float glass as functional layers on PV cover glass. The optical bandgap, UV-cutoff, UV-Vis transmittance, reflectivity (total and diffuse) and photoluminescence have been determined. The ZnO coating shifted the optical bandgap to longer wavelengths, resulting in a reduction of the transmittance of destructive UV radiation by up to ~85%. Distinct photoluminescence peaks at 377 nm and at 640 nm were observed for one of the ZnO samples. The TiO2 coated glasses also showed an increased UV cutoff, which resulted in a reduction of transmittance of destructive UV radiation by up to 75%. However, no photoluminescence peaks could be observed from the TiO2 films with 325 nm excitation laser, which can be explained by the fact that only indirect interband transitions are accessible at this excitation wavelength. Deposition of both ZnO and TiO2 coatings resulted in a reduction of the transmitted light convertible by PV modules, by up to 12.3 and 21.8%, respectively. The implication of the results is discussed in terms of lifetime expectancy and efficiency of PV modules.

16 March 2016 in Optical Materials Express
Verified
Journal Article
Open access
PDF file
Stefan KarlssonStefan Karlsson
Stefan Karlsson
LBLina Grund Bäck
Lina Grund Bäck
PKPinit Kidkhunthod
Pinit Kidkhunthod
KLKarin Lundstedt
Karin Lundstedt
Lothar WondraczekLothar Wondraczek
Lothar Wondraczek
Titania is widely considered as an alternative constituent for replacing heavy metal oxides in optical glasses. Its effect on optical properties, however, is complex. This is due to the dielectric properties of the prevalent ionic species, Ti4+, the potential co-existence of trivalent titanium, Ti3+, giving rise to intrinsic and extrinsic charge transfer reactions, and the existence of different coordination polyhedra, depending on matrix composition. Here, we present a systematic study of the optical properties of the soda-lime-silicate glass system as a function of TiO2 addition. We consider the silica-rich region of the SiO2-Na2O-CaO-TiO2 quaternary, which may be taken as model for a variety of technical glasses. Trends are described in the refractive index, the Abbe number, the optical bandgap and the Urbach energy. The addition of TiO2 increases the refractive index and the optical dispersion while it lowers the optical bandgap and the Urbach Energy. Results are discussed in relation to relevant literature data towards using titania silicate glasses as high-index replacements for heavy metal – containing oxide glasses.

10 December 2015 in Scientific Reports
Verified
Journal Article
Open access
KNKarsten H. Nielsen
Karsten H. Nielsen
Stefan KarlssonStefan Karlsson
Stefan Karlsson
RLRene Limbach
Rene Limbach
Lothar WondraczekLothar Wondraczek
Lothar Wondraczek
The abrasion resistance of coated glass surfaces is an important parameter for judging lifetime performance, but practical testing procedures remain overly simplistic and do often not allow for direct conclusions on real-world degradation. Here, we combine quantitative two-dimensional image analysis and mechanical abrasion into a facile tool for probing the abrasion resistance of anti-reflective (AR) coatings. We determine variations in the average coated area, during and after controlled abrasion. Through comparison with other experimental techniques, we show that this method provides a practical, rapid and versatile tool for the evaluation of the abrasion resistance of sol-gel-derived thin films on glass. The method yields informative data, which correlates with measurements of diffuse reflectance and is further supported by qualitative investigations through scanning electron microscopy. In particular, the method directly addresses degradation of coating performance, i.e., the gradual areal loss of antireflective functionality. As an exemplary subject, we studied the abrasion resistance of state-of-the-art nanoporous SiO2 thin films which were derived from 5–6 wt% aqueous solutions of potassium silicates, or from colloidal suspensions of SiO2 nanoparticles. It is shown how abrasion resistance is governed by coating density and film adhesion, defining the trade-off between optimal AR performance and acceptable mechanical performance.