SURESH CHANDRA PATNAIK

Prof. Dr. SURESH CHANDRA PATNAIK

Indira Gandhi Institute of Technology, Tālcher, India
orcid

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
24 August 2022 in Journal of Composites Science
Verified
Journal Article
Open access
PDF file
SRSonali Rout
Sonali Rout
RNRamesh Kumar Nayak
Ramesh Kumar Nayak
SPSURESH CHANDRA PATNAIK
SURESH CHANDRA PATNAIK
HYHamed Yazdani
Hamed Yazdani
The present investigation focuses on developing cost-effective Carbon/Glass/Kevlar fiber-reinforced polymer hybrid composite laminates for achieving its synergistic effect on flexural and impact performance. It investigates the effect of stacking sequence induced by the use of different fiber types (Kevlar = K, glass = G, and carbon = C) on the flexural and impact performance of the composites. Five hybrid composites (labelled as A = [G2K3G2], B = [KG2CG2K], C = [CKGCGKC], D = [CGKCKGC], E = [CK2CK2C]) and three plain (i.e., non-hybrid) composites (F = [K]7, G = [G]7, H = [C]7) have been fabricated through manual pre-preg lay-up manufacturing techniques. The flexural strength and modulus, hardness, and Izod impact strength have been evaluated for the fabricated composites and compared. The results showed that the D-type hybrid composite achieves the maximum positive hybrid effect as compared to other hybrid composites, possesses a hardness of 59 BHN, a flexural strength of 380 MPa, and modulus of 36 GPa, and impact strength of 80 KJ/m2. The fracture surfaces of the hybrid composite specimen have been analysed using scanning electron microscopy, and compared against the properties achieved for enabling correlations. Furthermore, the cost-efficiency of the hybridization in terms of flexural strength/cost, modulus/cost, and impact strength/cost ratio were evaluated for potential engineering and design applications.

5 December 2024 in Discover Materials
Verified
Journal Article
Open access
PDF file
SSSandeep Kumar Sahoo
Sandeep Kumar Sahoo
JMJOGENDRA MAJHI
JOGENDRA MAJHI
SPSURESH CHANDRA PATNAIK
SURESH CHANDRA PATNAIK
BSBHABANI PRASAD SAHOO
BHABANI PRASAD SAHOO
ASADITYAPRASAD SAHOO
ADITYAPRASAD SAHOO
Ajit BeheraAjit Behera
Ajit Behera
Aluminium matrix composites (AMCs) are well known for their excellent wear resistance and low weight. In the present work, in-situ synthesis of Al-Si-TiB2 composites with near eutectic and hypereutectic compositions of Al-Si alloys has been attempted through salt-metal reaction (K2TiF6 and KBF4 halide salts) by stir casting route. The fabricated composites were subjected to microstructure analysis, XRD study, sliding wear test, hardness and density measurements. The combined effect of Si and TiB2 is the novelty of this investigation to alter the structure–property correlation as well as hardness and tribological properties. Optical Emission Spectroscopy analysis indicated some amount of Si loss during stir casting and revealed the final composition of the cast composites. Though the increase in the density of the composite was not considerable due to incorporation of TiB2 particles, there was remarkable improvement in hardness and tribological properties attributed to clear interface between the matrix and the reinforcement as a result of in-situ process of fabrication. Wear resistance was found to be improved with increasing amount of Si content with a fixed TiB2 content in the composites under a constant load. TiB2 acts as a good grain refiner and improves the wear properties of the hypereutectic Al-Si alloy composites by decreasing the brittle primary silicon particle size.