This article reports about a wind‐tunnel experiment carried out in the ONERA F2 low‐speed wind tunnel on a model of the DU 97‐W‐300Mod airfoil designed for wind turbine application. The wind tunnel, the airfoil model, and experimental techniques used are presented, with special emphasis on the data processing and corrections required to derive airfoil forces and pressure distribution. To better document the flow physics at play, the results are illustrated by infrared thermography and surface oil flow visualization. The test allowed investigating Reynolds number effects between 1 and 3.8 millions. To ameliorate the understanding of the benefits and limitations of such airfoil testing, one section is devoted to the comparison of present results with previous experiments in other wind tunnels. Some of the difficulties arising in airfoil testing are evidenced and discussed to contribute to the improvement of test methods.
This paper presents the outcome of numerical simulations of the flowfield inside the ONERA F1 wind tunnel, which is a large-scale pressurized low-speed wind tunnel mostly used to investigate the takeoff and landing performance of aircrafts in high-lift configuration. The simulations were carried out under Reynolds-averaged Navier–Stokes modeling assumptions. Results were compared to available experimental data characterizing the tunnel flowfield, especially in the test section. The overall flow physics is well captured by the simulations. However, when looking at the result with a more demanding level of accuracy, some important characteristics of the velocity distribution in the test section, such as flow upwash and total pressure distribution, are not replicated. Reasons are discussed in the paper, and some recommendations are derived for future similar simulations.
In aerodynamics, characterizing the aerodynamic behavior of aircraft typically requires a large number of observation data points. Real experiments can generate thousands of data points with suitable accuracy, but they are time-consuming and resource-intensive. Consequently, conducting real experiments at new input configurations might be impractical. To address this challenge, data-driven surrogate models have emerged as a cost-effective and time-efficient alternative. They provide simplified mathematical representations that approximate the output of interest. Models based on Gaussian Processes (GPs) have gained popularity in aerodynamics due to their ability to provide accurate predictions and quantify uncertainty while maintaining tractable execution times. To handle large datasets, sparse approximations of GPs have been further investigated to reduce the computational complexity of exact inference. In this paper, we revisit and adapt two classic sparse methods for GPs to address the specific requirements frequently encountered in aerodynamic applications. We compare different strategies for choosing the inducing inputs, which significantly impact the complexity reduction. We formally integrate our implementations into the open-source Python toolbox SMT, enabling the use of sparse methods across the GP regression pipeline. We demonstrate the performance of our Sparse GP (SGP) developments in a comprehensive 1D analytic example as well as in a real wind tunnel application with thousands of training data points.
This paper presents the main features and outcomes of the wind tunnel testing of the High-Lift Common Research Model in the ONERA F1 pressurized low-speed wind tunnel. Two complementary test campaigns were carried out in 2022 and 2023, both using a full-span model, with variations in model configuration, angle of attack, angle of sideslip, Mach number, and Reynolds number, and including force and moment, pressure, wing deformation, and flow visualization data. The main elements of the test methodology are reviewed to better assess the quality of the database in terms of uncertainty, repeatability, and wall and support corrections. A selection of results is presented regarding longitudinal and lateral characteristics, the buildup of the landing configuration, Mach and Reynolds number effects, and flap-setting effects. A special focus is placed on the data that were used in the fifth High-Lift Prediction Workshop.
Aircraft wing stall is a highly complex phenomenon as several mechanisms interact depending on global and local flow characteristics. Recent developments in numerical methods and aerodynamic modeling make possible the vision of an accurate prediction of stall in the near future. In order to reach this objective, there is a need for a high-quality experimental database for validation, including surface and flowfield measurements. To that purpose, a generic test model was specifically designed and built to provide force balance metrics as well as steady and unsteady pressure signals. In particular, the model takes into account forward, backward, and zero sweep angles while adding high-lift devices in order to modify the stall mechanism on the wing. The model was then tested at the ONERA-F2 wind tunnel, and experimental results validate the model’s intended stall characteristics and provide the needed flow data for future numerical validations. This paper describes the different design choices, the measurement techniques considered for this test campaign, and the first results obtained validating the stall processes expected for the different designed configurations.