This paper presents an approach to a go-kart chassis design, vehicle dynamics calculation, Li-ion battery capacity analysis, and electric motor choice for optimized vehicle performance. The chassis analysis shown in this paper was performed using a CAD/FEA software package, SolidWorks Student Edition. Three highlights can be found in this paper: (1) An original design was implemented; the basic analysis was composed of chassis optimization using beam elements and modeling such an optimized chassis “locally” with solid elements for sub-modeling purposes. (2) The most stressed tube joint was sub-modeled to calculate the risk of tube wall stability. (3) Vehicle dynamics were calculated for the case of braking on a curved path and the case of a collision with the front tire due to road imperfection. The authors intend to install a data acquisition system in the future to analyze the stress of local chassis tubes. The results of the SolidWorks analysis indicate a safety design for the chassis concept. The results for the sub-model stability (buckling) analysis show that the chosen tube wall thickness-to-diameter ratio gives safety factor values ranging from 1.6 to 5. Based on the stress distribution, some improvement in the middle part of the chassis can be made by using a half-a-millimeter-thicker wall tube or a larger tube diameter of a few millimeters to lower the stress. The latter will be described in this paper.
30 September 2021 in Interdisciplinary Description of Complex Systems
One of the ways to improve the performance of centrifugal pumps, proposed and experimentally validated by our research, is the method of creating so-called coherent structures, vortices and turbulence in the peripheral area of the...
Arc stud welding differs from conventional arc welding techniques and is widely used for joining structural steel, stainless steel, aluminum, and copper alloys in various configurations. Achieving a reliable stud weld requires appropriate welding parameters and a suitable process selection, considering factors such as stud diameter, base material, and surface condition. This study experimentally compares three arc stud welding techniques—arc welding with a ceramic ferrule (ARC CF), arc welding with shielding gas (ARC SG), and arc welding assisted by a radially symmetric magnetic field (ARC SRM)—applied to structural steel (1.0038) and stainless steel (1.4301). Macrostructural analysis, Vickers hardness testing (HV10), visual inspection, non-destructive testing, and bend tests were performed to evaluate weld quality. Results show that ARC CF achieved the highest penetration and hardness but produced more spatter. ARC SG provided moderate penetration but was more prone to cold welds, while ARC SRM resulted in the cleanest collars with minimal spatter but shallower penetration. All welds met ISO 5817:2014 Quality Level C, confirming acceptable structural integrity. These findings support informed selection and optimization of stud welding techniques for diverse engineering applications.
The need for a simple, customised electric vehicle (EV) has inspired the research of the possibility to build a simple EV tailored for the specific needs of the buyer. This paper is focused on the concept of an EV with no conventional...