Unmanned systems provide significant prospects for improving the efficiency of electromagnetic geophysical exploration in mineral prospecting and geological mapping, as they can significantly increase the productivity of field surveys by accelerating the movement of the measuring system along the site, as well as minimizing problems in cases where the pedestrian walkability of the site is a challenge. Lightweight and cheap UAV systems with a take-off weight in the low tens of kilograms are unable to carry a powerful current source; therefore, semi-airborne systems with a ground transmitter (an ungrounded loop or grounded at the ends of the line) and a measuring system towed on a UAV are becoming more and more widespread. This paper presents the results for a new generation of semi-airborne technology SibGIS UAV-TEMs belonging to the “line-loop” type and capable of realizing the transient/time-domain (TEM) electromagnetics method used for studying a uranium object of the paleovalley type. Objects of this type are characterized by a low resistivity of the ore zone located in relatively high-resistivity host rocks and, from the position of the geoelectric structure, can be considered a good benchmark for assessing the capabilities of different electrical exploration technologies in general. The aeromobile part of the geophysical system created is implemented on the basis of a hexacopter carrying a measuring system with an inductive sensor, an analog of a 50 × 50 m loop, an 18-bit ADC with satellite synchronization, and a transmitter. The ground part consists of a galvanically grounded supply line and a current source with a transmitter creating multipolar pulses of quasi-DC current in the line. The survey is carried out with a terrain drape based on a satellite digital terrain model. The article presents the results obtained from the electromagnetic soundings in comparison with the reference (drilled) profile, convincingly proving the high efficiency of UAV-TEM. This approach to pre-processing UAV–electrospecting data is described with the aim of improving data quality by taking into account the movement and swaying of the measuring system’s sensor. On the basis of the real data obtained, the sensitivity of the created semi-airborne system was modeled by solving a direct problem in the class of 3D models, which allowed us to evaluate the effectiveness of the method in relation to other geological cases.
12 November 2024 in Earth sciences and subsoil use
The current situation in the mining and geological industry requires acceleration and reduction of the cost of exploration works. Ground-based contactless methods as well as methods using unmanned aerial vehicles have significant prospects for geophysical exploration optimization in difficult-to-access areas with faltering galvanic grounding. The purpose of the study is to present the results of both the use of contactless electrical exploration (electric field contactless measurement), which is commonly used in engineering surveys, and magnetic exploration performed with the use of unmanned aerial vehicles. The complex is aimed at searching for primary gold in the Bodaibo district of the Irkutsk region. The paper provides a brief description of the geological (geophysical) situation and justifies a rational measurement method. Geophysical works have been carried out on a scale of 1:10000. Also, the obtained data have been compared with the application field of the contactless technology of the resistivity method. As a result, additional and necessary theses have been proposed for the long-held measurement technique. It has been determined that the proposed complex allows confident mapping of the main geological structures promising for gold mineralization in a shorter period of field work.
20 February 2025 in Earth sciences and subsoil use
The purpose of the work is to demonstrate the possibility to clarify and correct medium-scale geological maps of precursors (scale 1:200000–1:50000) using low-altitude unmanned aerial geophysical survey which is the fastest and low cost method of obtaining geological and geophysical data. A quantitative assessment is given to the more accurate identification of the location of geological boundaries and potential ore-bearing structures of the Sukhoi Log type. The first stage of geological study of the area involved obtaining the data from low-altitude unmanned gamma and aeromagnetic surveys. The survey results were prepared, interpolated, visualized, and, finally, subjected to geological and geophysical interpretation. Lineaments of the highest and lowest values, as well as the maximum gradients were identified in the magnetic field while the areas with the least variability at the lowest values and positive anomalies were identified in the gamma field. Interpretation and cross-comparison of the specified data allowed to compile new geological maps of the day surface and pre-Quaternary formations without any ground geological survey but based on the ideas about the geology of the region and characteristic differences in the physical properties of rocks. Taking into account regional stratigraphic and structural search criteria, two sites promising for gold mineralization were identi-fied in the studied area. It is shown that the known geological boundaries in these areas are shifted relative to the real ones by 100–1400 m (on average by 300 m), which is a significant error both in terms of mining and drilling operation planning and general correct understanding of the geological situation. The results obtained are typical for the projects aimed at gold exploration in the Bodaibo District of the Irkutsk region. The results of the study allow to conclude that the express and inexpensive method is useful for the specification of the position of geological and promising ore-bearing structures in the area under investigation, as well as for similar areas in nearby licensed areas and other sites of the Bodaibo synclinorium.
The article presents the application results of a set of geophysical methods to study the Kaspinsky ore cluster in the Krasnoyarsk Krai. The purpose of the study was to evaluate the efficiency of various modern methods when solving the problem of identifying the boundaries of intrusive massifs and analyzing tectonic disturbances that play a key role in the formation of gold-sulfide-quartz mineralization. The geophysical complex included unmanned magnetic exploration (SibGIS UAS complex), non-contact electric field measurement (BIKS non-contact measurement of electric field hardware complex) and electromagnetic sensing with induced polarization (Mars hardware and software complex). Magnetic exploration allowed to identify small diorite massifs of the Olkhovsky complex and their contacts with carbonate deposits, as well as to identify tectonic faults. Electrical exploration contributed to the analysis of small faults and distribution of induced polarization, which is important when searching for mineralization zones. Also, the study included a three-dimensional cascade inversion of magnetic exploration data for intrusive body localization. Conducted work resulted in the conclusion that the presented methodology is not optimal and the complex of geophysical methods is redundant. It is proposed to exclude the method of non-contact measurement of electric fields in further researches due to the small amount of useful information and interpretation problems as compared with the method of electromagnetic sensing and induced polarization. In addition, the main change in the methodology is the sequence of work stages. The data obtained as a result of the conducted research served as one of the bases for setting up drilling operations at the exploration stage.