DC microgrids have been known to be a promising solution for improving renewable energy integration with electrical grid and enhancing the system's overall energy efficiency. A key component of this microgrid is the energy storage system, which besides smoothing the intermittent behavior of renewable sources, also allows intentional islanding and the execution of optimization routines to improve the microgrid performance. Assuming that storage systems in commercial and residential buildings will mostly be composed of multiple storage units, an energy storage management system, which provides charge/discharge monitoring and state-of-charge (SOC) equalization, is needed to prevent overcharging the units or their uneven use, which can lead to faster deterioration of battery banks. This paper proposes an energy storage management system based on distributed secondary level control, which promotes charge/discharge control and provides SOC equalization simultaneously. The SOC imbalance compensation alters the energy storage unit virtual droop resistance according to the difference between the unit SOC and the microgrid average SOC, thus the compensation intensity is dependent on the imbalance level being suitable to be employed in dc bus signaling controlled microgrids.
15 July 2020 in IEEE Transactions on Power Electronics
This work proposes a distributed secondary level control strategy for dc microgrids, which achieves accurate and proportional power sharing and dc bus voltage deviation restoration based on voltage-shifting. In contrast to similar approaches, only one variable per converter is transmitted in the low-bandwidth communication link and with a simple integrator as the secondary level controller both objectives are achieved simultaneously. The information state shared between converters is a $\lambda$ factor that incorporates the converter output voltage and power information. The secondary control computes the average $\lambda$ locally and the controller generates an unique voltage-shifting term that modifies the converter output voltage reference. When all converters' $\lambda$ converge to the average value, both the power sharing correction and the dc bus voltage restoration are attained. The proposed technique suppresses the need for a complex control structure and large amount of converter variables. The proposed control is evaluated through PLECS simulation and it is validated in a 4.5 kw dc microgrid setup.
DC-based microgrids are promising solutions to enhance the energy efficiency, reliability and safety of residential and commercial buildings, as well as to provide more effectively higher penetration of renewable energy resources into the electrical grid. However, despite the great effort that is being done by electronics, telecom/datacom and buildings sector companies and entities upon the standardization of DC distribution networks, the lack of practical experience and safety issues regarding the utilization of DC powered buildings still works against DC adoption. This paper aims to contribute with the discussion about residential DC microgrid safety by evaluating system grounding schemes and its effects on personal safety and endurance to ground faults.
1 November 2019 in IEEE Transactions on Power Electronics
This paper proposes a secondary level control technique for dc microgrids, which achieves accurate power sharing through a distributed strategy whilst performing dc bus voltage restoration in a decentralized fashion. In order to attain proper power sharing, each power converter exchanges its output power information with neighboring converters through a low-bandwidth network at defined time intervals. A consensus-based algorithm is employed to process this information and modify the converter's droop coefficient, compensating droop mismatches and cable resistances and enabling power sharing. Restoration of the average dc bus voltage is realized locally with each converter compensating its own output voltage drop through an integrator. A comprehensive design procedure and performance and stability analysis, including communcation loss and substantial time delays are also provided. The strategy has shown to be robust to some communication failure scenarios and moderate communication delays. The proposed method is evaluated trough PLECS simulation and it is experimentally validated in a 4.5 kW dc microgrid setup.
7 April 2020 in IEEE Transactions on Industrial Electronics
A hybrid AC/DC microgrid combines the benefits of AC and DC power systems. It provides high efficiency and is compatible with conventional AC distribution network. This paper proposes a centralized energy management approach to perform coordinated control on a hybrid AC/DC microgrid as a single-controllable entity. The central controller relies on low-bandwidth communication channels and is aimed at achieving 1) proportional power sharing among energy storage units located in both DC and AC sides of the microgrid, 2) state-of-charge equalization of the energy storage units, 3) grid power flow control, 4) plug-and-play capability, and 5) operation in grid-connected and islanded modes through an interlinking utility interface converter. The state-of-charge equalization method guarantees uniform operation of the energy storage units during both charge and discharge modes considering typical operational transients. Finally, the proposed model-free approach is evaluated experimentally through a laboratory-scale hybrid AC/DC microgrid in different operational conditions in both grid-connected and islanded operating modes.
This paper investigates a Solid State Transformer (SST) based DC microgrid architecture, addressing the design and control of the multiple SST power conversion stages and the power management strategy required for its integration with other microgrid elements, such as storage devices and local distributed generation. The advantages of a SST in relation to conventional low frequency transformers are commonly listed as a substantial reduction of volume and weight, fault isolation capability, voltage regulation, harmonic filtering, reactive power compensation and power factor correction. The SST also constitutes the required infrastructure that will enable DC power distribution to homes and commercial buildings in the near future and provides a more efficient way to integrate storage devices and distributed generation into the electrical grid. In this sense the SST behaves as an energy router, which represents a key element in an intelligent power system. The behavior of the proposed architecture for different operating conditions and disturbances will be assessed through computational simulations in the software MATLAB/Simulink.